Strength,durability, and microstructure of self-compacting geopolymer concrete produced with copper slag aggregates

Environmental Science and Pollution Research - Lack of vibrations on fresh concrete negatively influences the compaction and thus the quality of concrete. This is particularly concerning with...     

Prenatal diagnosis of Myhre syndrome with a heterozygous pathogenic variant in SMAD4 gene presented with thick nuchal translucency and cardiac abnormalities

Prenatal testing was performed in a 39-year-old Chinese pregnant woman referred for increased nuchal translucency measuring 5.7 mm. Non-invasive prenatal testing and SNP array study on amniotic fluid samples were normal. Whole exome sequencing (WES) was initiated further as the fetus had pericardial effusion of 1.2 mm, thickened myocardium over the right ventricular lateral wall and aberrant right subclavian artery. A detailed fetal echocardiogram also revealed persistent left superior vena cava and dilated coronary sinus at 20 weeks. From whole exome sequencing of the trio, a de novo heterozygous variant NM_005359.5(SMAD4): c.1499T>C (p.Ile500Thr) was detected. This pathogenic variant has been reported in the postnatal case cohort of Myhre syndrome. This condition is characterized by facial dysmorphism, intellectual disability, hearing loss, skeletal abnormalities and potential life threatening respiratory or cardiovascular manifestations. Termination of pregnancy was performed at 23 weeks. Small chins, pre-axial polydactyly, brachydactyly and clinodactyly were noted in the abortus. Ultrasound findings of increased nuchal translucency, thickened myocardium and pericardial effusion prompted further genetic evaluation for the prenatal diagnosis of Myhre syndrome by whole exome sequencing.     

Demotivating factors affecting the implementation of ISO 14001:2015 in Malaysia

Industrialization has brought with it environmental problems and the consequences of pollution, which has been affecting the world for decades. Immediate action is required to raise industry's awareness of its social responsibilities toward the environment. However, experience shows that companies that have obtained International Organization of Standardization (ISO) 14001:2015 certifications in Malaysia occupy but a small niche among the country's businesses. The purpose of this study is to assess the list of barriers and challenges to implementing and obtaining certifications under the ISO 14001:2015 Environmental Management System (EMS) by Malaysian firms. In addition, this study will rank these factors relative to their importance. This study is aimed at EMS experts at the Scientific and Industrial Research Institute of Malaysia (SIRIM QAS International Sdn. Bhd.). The study uses mathematical pairwise comparisons to generate the list of critical challenges and barriers. Therefore, the study is expected to raise environmental awareness among Malaysia's industries regarding the adoption of ISO 14001:2015 standards. Furthermore, the study provides a guideline for Malaysia's industries and policy‐makers to provide them with a better understanding of the barriers and challenges that companies face in implementing ISO 14001:2015 EMS, and at the same time, help them understand the need to eliminate the difficulties of standard implementation.     

Synthesis of a highly recoverable 3D MnO2/rGO hybrid aerogel for efficient adsorptive separation of pharmaceutical residue

Water contamination by non-steroidal anti-inflammatory drugs, such as acetaminophen, is an emerging ecological concern. In this study, a new three-dimensional manganese dioxide-engrafted reduced graphene oxide (3D MnO₂/rGO) hybrid aerogel was developed for acetaminophen sequestration. The synthesis involved firstly the self-assembly of GO aerogel, followed by thermal reduction and in-situ MnO₂ growth by redox-reaction. The aerogel demonstrated interlinked planes with smooth surfaces deposited with MnO₂ nanospheres and pores of 138.4 – 235.3 µm width. The influences of adsorbent dosage, initial pH, acetaminophen concentration, temperature and contact time were investigated. It was determined that the adsorption of acetaminophen occurred on uniform sorption sites in the aerogel, as suggested by the best fit of data to the Langmuir isotherm, yielding a maximum adsorption capacity of 252.87 mg/g. This highest adsorption performance of the 3D MnO₂/rGO aerogel was attained at a dosage of 0.6 g/L, initial pH of 6.2 and temperature of 40°C. The process kinetics were in-line with the pseudo-first-order and pseudo-second-order kinetics at 10 and 20 – 500 mg/L concentrations, respectively. Thermodynamic assay showed the spontaneity and endothermicity features of the 3D MnO₂/rGO-acetaminophen system. The acetaminophen adsorption mechanisms were mainly hydrogen bonding and pore entrapment. Moreover, the as-synthesised aerogel was effectively regenerated using acetone and re-utilised in four adsorption-desorption cycles. Overall, the results highly recommend the implementation of the 3D MnO₂/rGO hybrid aerogel for purification of wastewater polluted by acetaminophen residue.     

Effect of pollinator abundance on self-fertilization and gene flow: application to GM Canola.

Cross-pollination from fields of transgenic crops is of great public concern. Although cross-pollination in commercial canola (Brassica napus) fields has been empirically measured, field trials are expensive and do not identify the causes of cross-pollination. Therefore, theoretical models can be valuable because they can provide estimates of cross-pollination at any given site and time. We present a general analytical model of field-to-field gene flow due to the following competing mechanisms: the wind, bees, and autonomous pollination. We parameterize the model for the particular case of field-to-field cross-pollination of genetically modified (GM) canola via the wind and via bumble bees (Bombus spp.) and honey bees (Apis mellifera). We make extensive use of the large data set of bee densities collected during the recent U.K. Farm Scale Evaluations. We predict that canola approaches almost full seed set without pollinators and that autonomous pollination is responsible for > or = 25% of seed set, irrespective of pollinator abundance. We do not predict the relative contribution of bees vs. the wind in landscape-scale gene flow in canola. However, under model assumptions, we predict that the maximum field-to-field gene flow due to bumble bees is 0.04% and 0.13% below the current EU limit for adventitious GM presence for winter- and spring-sown canola, respectively. We predict that gene flow due to bees is approximately 3.1 times higher at 20% compared to 100% male-fertility, and due to the wind, 1.3 times higher at 20% compared to 100% male-fertility, for both winter- and spring-sown canola. Bumble bee-mediated gene flow is approximately 2.7 times higher and wind-mediated gene flow approximately 1.7 times lower in spring-sown than in winter-sown canola, regardless of the degree of male-sterility. The model of cross-pollination due to the wind most closely predicted three previously published observations: field-to-field gene flow is low; gene flow increases with the proportion of plants that are male-sterile; and gene flow is higher in winter- than in spring-sown canola. Our results therefore suggest that the wind, not bees, is the main vector of long-distance gene flow in canola.     

Secondary organic aerosol formation from cyclohexene ozonolysis in the presence of water vapor and dissolved salts

A series of 90 experiments were conducted in the UC Riverside/CE-CERT environmental chamber to evaluate the impact of water vapor and dissolved salts on secondary organic aerosol formation for cyclohexene ozonolysis. Water vapor (low – 30 ± 2% RH, medium – 46 ± 2% RH, high – 63 ± 2% RH) was found to directly participate in the atmospheric chemistry altering the composition of the condensing species, thus increasing total organic aerosol formation by ～22% as compared to the system under dry (<0.1% RH) conditions. Hygroscopicity measurements also indicate that the organic aerosol composition is altered in the presence of gaseous water. These results are consistent with water vapor reacting with the crigee intermediate in the gas phase resulting in increased aldehyde formation. The addition of dissolved salts ((NH₄)₂SO₄, NH₄HSO₄, CaCl₂, NaCl) had minimal effect; only the (NH₄)₂SO₄ and NaCl were found to significantly impact the system with ～10% increase in total organic aerosol formation. These results indicate that the organics may be partitioning to an outer organic shell as opposed to into the aqueous salt. Hygroscopicity measurements indicate that the addition of salts does not alter the aerosol composition for the dry or water vapor system.     

Turning waste to wealth-biodegradable plastics polyhydroxyalkanoates from palm oil mill effluent – a Malaysian perspective

Palm oil industries have been contributing significantly towards the country’s economy and increase standard of living among Malaysians. However, it has also been identified as the major contributor for discharging the largest pollution load throughout the country. Owing to high biochemical oxygen demand (BOD) and chemical oxygen demand (COD), the palm oil mill effluent (POME) cannot be discharged directly into the environment. Thus, palm oil industries are facing tremendous challenges in order to comply with environmental regulations. While anaerobic digestion has been employed by most mills as primary treatment, POME can also be a potential source of degradable organic material which can be converted into value-added products and fine chemicals. Organic acids generated during acid-phase anaerobic digestion of POME could be a potential carbon source for the production of polyhydroxyalkanoates (PHA)- a biodegradable thermoplastic material of microbial origin. This paper aims at understanding how organic acids from POME may serve as a renewable feedstock for the biosynthesis of PHA.     

Pinch analysis approach to carbon-constrained planningfor sustainable power generation

A graphical pinch-based methodology for planning retrofits for carbon capture and storage (CCS) in the power generation sector is presented in this work. CCS is widely seen as one of the essential interim technologies to mitigate greenhouse gas emissions, while still being able to utilize fossil fuels, which are relatively inexpensive and reliable in comparison to inherently low-carbon renewable resources. However, retrofitting power plants for CCS entails major capital costs as well as a reduction of thermal efficiency and power output. Thus, it is essential for planning purposes to implement the minimal extent of CCS retrofit that meets the sectoral carbon footprint targets. At the same time, it is necessary to plan for additional power generation capacity or efficiency enhancements to compensate for energy losses resulting from CCS retrofits. The simple graphical approach used in this paper is designed to determine such targets, and shares the same intuitive, insight-driven characteristics of pinch analysis techniques. A case study is shown to illustrate the methodology.