Leaching characteristics of stabilized/solidified fly ash generated from ash-melting plant

This study was designed to elucidate the leaching characteristics of stabilized/solidified (S/S) fly ash generated by ash-melting. For this study, pH-dependent leaching tests, sequential extraction procedures, and column leaching tests were carried out. The pH-dependent leaching test results for Pb, Cu, and Zn showed that the heavy metal concentrations in the high-pH range were lower than the predicted values for hydroxide and carbonate. During sequential extraction, Cu and Pb were principally distributed in the S/S ashes' organic matter fraction in the chelating agent, suggesting that metals bind to the chelating agent. The percentage of the water-soluble fraction for Pb and Cu was low (<0.2 %). The fly ashes treated with a chelating agent and cement had low leachability potential for metals in the high-pH range. Column tests for S/S fly ashes showed that two leaching stages were distinguishable: one for short time, corresponding to faster metal leaching, and another for the leaching rate. Kinetic speciation was then applied to data obtained from column leaching tests. The first-order reaction/diffusion model showed a better fit for Ca, Pb, and Cu, suggesting that the initial dissolution of soluble compounds, such as metal chloride, was controlled by the first-order reaction (surface wash off). Subsequently, insoluble compounds such as hydroxide or carbonate might penetrate into the porous matrix by diffusion.     

Comparison of two types of municipal solid waste incinerator fly ashes with different alkaline reagents in washing experiments

In this study, we propose a "washing-calcination-conversion of washed fly ash into cement material with bottom ash" (WCCB) system to reduce the amount of fly ash that must be specially treated so it can be used as raw cement material. Calcium hydroxide (Ca(OH)2) is widely used in air-pollution control devices of incinerators while sodium bicarbonate (NaHCO3) is not. We conducted single-, double-, and triple-washing experiments to compare the washing characteristics of two types of fly ash. Unlike NaHCO3 fly ash, Ca(OH)2 fly ash has almost twice as much washed residue and almost 2.5 times more chlorine after the same washing procedure. After washing once, the washing frequency is also important for NaHCO3 fly ash, while the mixing time and liquid/solid ratio are more critical for Ca(OH)2 fly ash. The use of NaHCO3 is more suitable for the WCCB system.     

Stable relatedness structure of the large-colony swarm-founding wasp Polybia paulista

In social-insect colonies, cooperation among nestmates is generally stabilized by their high genetic similarity. Thus, fitness gained through cooperation drops quickly as the number of reproductive females (queens) increases. In this respect, wasps of the tribe Epiponini have attracted special attention, because the colonies have tens, or even hundreds of queens. It has been empirically or genetically confirmed that relatedness within nestmates can be elevated by a mechanism known as cyclical monogyny, under which new queens are produced only after the number of old queens is reduced to one. Another likely factor that can increase relatedness within nestmates under polygyny is comb partitioning by queens. If queens concentrate their egg laying on one or a subset of the available combs, then workers may be able to rear closer relatives by focusing their work on the comb where they emerged. Using microsatellite markers, we tested the hypotheses of cyclical monogyny and comb partitioning by queens increasing relatedness within nestmates under polygyny in the large-colony epiponine wasp, Polybia paulista. There were no significant differences between relatedness within combs and between combs, and thus we ruled out the possibility that each queen partitions reproduction between combs. However, as cyclical monogyny predicts, a lower effective number of queens contributed to queen production than to worker production. Cyclical monogyny explained well the observed smaller effective number of queens for new queens than that for workers, but failed to explain the stable relatedness values throughout colony cycles.Communicated by L. Keller     

烧结升温方式及气氛对水洗焚烧飞灰晶体演变的影响

为使水洗焚烧飞灰的稳定化处理进一步优化，探讨了热处理的加热过程、气氛条件等对水洗焚烧飞灰晶体成分演变的影响.同时也探讨了3种飞灰：锅炉飞灰（RFA）、CaO/Ca（OH）₂和NaHCO₃分别作为中和剂得到的两种飞灰（CaFA和NaFA）水洗后（RFA-II#、CaFA-II#和NaFA-II#）进行热处理比较.结果发现700℃是个转折点，从这个温度点开始3种水洗飞灰中的晶体成分发生明显变化；原位连续加热模式更容易形成固体溶液因而更适合重金属的稳定；NaFA-II#较之CaFA-II#更易于稳定重金属成分.Factsage的模拟结果与XRD结果一致，而且发现飞灰中氯化物在加热过程中首先释放的是HCl.     

Physical containment of municipal solid waste incineration bottom ash by accelerated carbonation

Accelerated carbonation of municipal solid waste incineration residues is effective for immobilizing heavy metals. In this study, the contribution of the physical containment by carbonation to immobilization of some heavy metals was examined by some leaching tests and SEM–EDS analysis of untreated, carbonated, and milled bottom ash after carbonation that was crushed with a mortar to a mean particle size of approximately 1 μm. The surface of carbonated bottom ash particles on SEM images seemed mostly coated, while there were uneven micro-spaces on the surface of the untreated bottom ash. Results of Japan Leaching Test No. 18 (JLT18) for soil pollution showed that milling carbonated bottom ash increased the pH and EC. The leaching concentration of each element tended to be high for untreated samples, and was decreased by carbonation. However, after the milling of carbonated samples, the leaching concentration became high again. The immobilization effect of each element was weakened by milling. The ratio of physical containment effect to immobilization effects by accelerated carbonation was calculated using the results of JLT18. The ratio for each element was as follows: Pb: 13.9–69.0 %, Cu: 12.0–49.1 %, Cr: 24.1–99.7 %, Zn: 20.0–33.3 %, and Ca: 28.9–63.4 %.     

Evaluation of metals in the residue of paper sludge after recovery of pulp components using an ionic liquid

The quantity of sludge produced by the paper industry in Japan in 2011 was estimated to be 27.91 million tons wet weight. This amount is the third largest among all industrial wastes. To explore ways of reusing recovered paper pulp and safely disposing of the residue, we investigated the distribution of metals in the process of recovery of pulp from two types of paper sludge using an ionic liquid. 32 and 46 % of pulp from paper sludge A and B was recovered using ionic liquid, respectively; the resultant weight reduction of the solid mass was comparable to that of incineration. There were virtually no heavy metals but aluminum in the recovered pulp, which makes its reuse viable at present. The characteristics of the metals in the residues differed according to the treatment used and properties of the paper sludge. Copper accounted for ~10 % in the ionic liquid used for recovery of pulp from the paper sludges. This suggests that [bmIm]Cl has the potential to dissolve a specific amount of copper compared to other metals.     

Identification of nonvolatile neutral organic compounds in tap water

Nonvolatile neutral organic compounds in tap water were examined by high-pressure liquid chromatography, infrared spectrometry, ¹H- and ¹³C-FT-NMR, gel permeation chromatography, elementary analysis, and field desorption mass spectrometry. Neutral organic compounds in 10 m³ of tap water were continuously extracted by the Amberlite XAD-2 resin column, and separated into four fractions by silica-gel column chromatography. Removal of volatile compounds in fraction 3 including polar oxygenated compounds was carried out with microdistillation column under high vacuum by using a diffusion pump. Nonvolatile organic compounds isolated from tap water were identified as poly(vinyl acetate) derivatives with molecular weights ranging from 300 to 1300.     

Spatial variability of nitrous oxide emissions and their soil-related determining factors in an agricultural field

To evaluate spatial variability of nitrous oxide (N2O) emissions and to elucidate their determining factors on a field-scale basis, N2O fluxes and various soil properties were evaluated in a 100- x 100-m onion (Allium cepa L.) field. Nitrous oxide fluxes were determined by a closed chamber method from the one-hundred 10- x 10-m plots. Physical (e.g., bulk density and water content), chemical (e.g., total N and pH), and biological (e.g., microbial biomass C and N) properties were determined from surface soil samples (0-0.1 m) of each plot. Geostatistical analysis was performed to examine spatial variability of both N2O fluxes and soil properties. Multivariate analysis was also conducted to elucidate relationships between soil properties and observed fluxes. Nitrous oxide fluxes were highly variable (average 331 microg N m(-2) h(-1), CV 217%) and were log-normally distributed. Log-transformed N2O fluxes had moderate spatial dependence with a range of >75 m. High N2O fluxes were observed at sites with relatively low elevation. Multivariate analysis indicated that an organic matter factor and a pH factor of the principal component analysis were the main soil-related determining factors of log-transformed N2O fluxes. By combining multivariate analysis with geostatistics, a map of predicted N2O fluxes closely matched the spatial pattern of measured fluxes. The regression equation based on the soil properties explained 56% of the spatially structured variation of the log-transformed N2O fluxes. Site-specific management to regulate organic matter content and water status of a soil could be a promising means of reducing N2O emissions from agricultural fields.     

Simultaneous determination of atmospheric sulfur and nitrogen oxides using a battery-operated portable filter pack sampler

We developed a method to analyze atmospheric SO(x) (particulate SO(4)(2-)+ gaseous SO(2)) and NO(x) (NO + NO(2)) simultaneously using a battery-operated portable filter pack sampler. NO(x) determination using a filter pack method is new. SO(x) and NO(x) were collected on a Na(2)CO(3) filter and PTIO (2-phenyl-4,4,5,5-tetramethylimidazoline-3-oxide-1-oxyl) + TEA (triethanolamine) filters (6 piled sheets), respectively. Aqueous solutions were then used to extract pollutants trapped by the filters and the resulting extracts were pre-cleaned (e.g. elimination of PTIO) and analyzed for sulfate and nitrite by ion chromatography. Recoveries of SO(2) and NO(x) from standard pollutant gases and consistency of the field data with those from other instrumental methods were examined to evaluate our method. SO(x) and NO(x) could be analyzed accurately with determination limits of 0.2 ppbv and 1.0 ppbv (as daily average concentrations), respectively. The sampler can determine SO(x) and NO(x) concentrations at mountainous or remote sites without needing an electric power supply.