Nitrate levels in fresh vegetables and berries from central Japan

Nitrate concentrations in 326 recent vegetables and berries sold in Niigata, located in central Japan, were investigated. Maximum nitrate concentrations of 6600 mg kg^?1 were detected in samples of komatsuna (Brassica campestris var. perviridis) and mizuna (B. campestris L.). Mean concentrations ranged from 4 mg kg^?1(blueberry) to 3500 mg kg^?1 (mizuna). Concentrations in spinach ranged from 10 to 6000 mg kg^?1 (mean 1500 mg kg^?1). Nitrate intake from spinach and Japanese radish (Raphanus sativus) were estimated to be 0.7 and 0.8 mg kg^?1 day^?1, respectively. These values are equivalent to 19% and 23% of the acceptable daily intake (ADI). Nitrate intake at the 90th percentile was estimated to be 1.3 mg kg^?1 day^?1 (35% of the ADI) from spinach and 1.6 mg kg^?1 day^?1 (43% of the ADI) from Japanese radish.     

A survey on characteristics of leachate pond in an offshore municipal solid waste disposal site

Leachate from a landfill is collected and flowed in leachate accumulation pond, and sent to treatment facility. However, leachate in the pond can be a source of complaints from residents due to off coloration or odor, particularly near heavily populated urban areas. In this study, for the purpose of appropriate control of leachate pond, pond water and sediment were sampled in an offshore municipal solid waste disposal site 2 years after the disposal site was closed, and analyzed some parameters to estimate their properties. The pond water had high alkalinity due to the disposal of incineration residues, and EC and COD_Mn were also high. On the other hand, Cr, Mn, Fe, Cu, Zn, Cd, and Pb did not exceed the Japanese effluent water standards. Total sulfide was detected from all sediment samples during the sampling period, and values in the summer were slightly higher than at other times. To investigate the stabilization of targeted disposal site, the relationships among cumulative liquid/solid ratio (L/S) with pH and Cl^? elution after closing the site were examined. Both parameters showed a direct relationship with cumulative L/S ratio, which can be anticipated to continue increasing in the future.     

牛肉生产及其资源与环境问题

以肉牛饲养为主的现代畜牧业,大多基于生态效率低下的浓厚饲料多给型生产方式,致使饲料用粮多,己占全球粮食总产量的４０％,同时引发相当严重的水土污染,并加剧全球温室效应。本文概论世界牛肉生产及相关资源与环境问题,分析相应环境影响评价方法,进而针对中国国情,探讨适合于中国可持续发展的牛肉生产系统。     

Estimation of Vegetation Coverage in Semi-arid Sandy Land Based on Multivariate Statistical Modeling Using Remote Sensing Data

The estimation of vegetation coverage is essential in the monitoring and management of arid and semi-arid sandy lands. But how to estimate vegetation coverage and monitor the environmental change at global and regional scales still remains to be further studied. Here, combined with field vegetation survey, multispectral remote sensing data were used to estimate coverage based on theoretical statistical modeling. First, the remote sensing data were processed and several groups of spectral variables were selected/proposed and calculated, and then statistically correlated to measured vegetation coverage. Both the single- and multiple-variable-based models were established and further analyzed. Among all single-variable-based models, that is based on Normalized Difference Vegetation Index showed the highest R (0.900) and R ² (0.810) as well as lowest standard estimate error (0.128024). Since the multiple-variable-based model using multiple stepwise regression analysis behaved much better, it was determined as the optimal model for local coverage estimation. Finally, the estimation was conducted based on the optimal model and the result was cross-validated. The coefficient of determination used for validation was 0.867 with a root-mean-squared error (RMSE) of 0.101. The large-scale estimation of vegetation coverage using statistical modeling based on remote sensing data can be helpful for the monitoring and controlling of desertification in arid and semi-arid regions. It could serve for regional ecological management which is of great significance.     

Challenges to the Future Development of Iran’s Protected Areas System

Since the 1950s, there has been a continuous increase in the number and coverage of protected areas (PAs) in Iran, and in total 253 PAs have been declared that cover 10.12?% of the country's area. This paper reviews literature addressing Iran's PAs, examines what is known about them, highlights the challenges and lessons learned, and identifies areas where more research is needed. The PA system in Iran is criticized because of (1) shortages of manpower, equipment, and financial resources; (2) de jure PAs that are often implemented as de facto reserves; (3) lack of national biodiversity indicators and objective monitoring processes; and (4) limited public participation and conflict between people over PAs. To improve, Iran's PAs system needs to be realistically supported by policies and planning instruments. In addition, the implementation of active management to restore habitat, increase education and awareness, shift practices towards the guidelines of international organizations, build capacity, and improve management and co-management by local communities needs to occur.     

Simultaneous determination of seven anticoagulant rodenticides in agricultural products by gel permeation chromatography and liquid chromatography–tandem mass spectrometry

A sensitive and reliable method for the simultaneous determination of hydroxycoumarin-type (brodifacoum, bromadiolone, coumatetralyl, and warfarin) and indandione-type (chlorophacinone, diphacinone, and pindone) rodenticides in agricultural products by gel permeation chromatography (GPC) and liquid chromatography–tandem mass spectrometry (LC–MS/MS) was developed. The procedure involved extraction of the rodenticides from samples with acetone, followed by liquid–liquid partitioning with hexane/ethyl acetate (1:1, v/v) and 10% sodium chloride aqueous solution, then cleanup using GPC, and finally, analysis using LC–MS/MS. High recoveries from the GPC column were obtained for all rodenticides tested using a mobile phase of acetone/cyclohexane/triethylamine (400:1600:1, v/v/v). An ODS column, which contains low levels of metal impurities, gave satisfactory peak shapes for both hydroxycoumarin- and indandione-type rodenticides in the LC–MS/MS separation. The average recoveries of rodenticides from eight agricultural foods (apple, eggplant, cabbage, orange, potato, tomato, brown rice, and soybean) fortified at 0.0005–0.001 mg/kg ranged from 76 to 116%, except for bromadiolone in orange (53%) and diphacinone in soybean (54%), and the relative standard deviations ranged from 1 to 16%. The proposed method effectively removed interfering components, such as pigments and lipids, and showed high selectivity. In addition, the matrix effects were negligible for most of the rodenticide/food combinations. The results suggest that the proposed method is reliable and suitable for determining hydroxycoumarin- and indandione-type rodenticides in agricultural products.     

Development of enzyme immunoassay for detection of DDT

Dichlorodiphenyltrichloroethane (DDT) is one of the persistent organic pollutants (POPs) widely found in the environment and in the general population. In this study, a direct competitive enzyme immunoassay (EIA) has been developed for the quantitative analysis of DDT. To generate a specific polyclonal antibody for EIA, p, p′-DDT was conjugated to porcine thyroglobulin for rabbit immunization. At optimized EIA conditions, the standard curves ranged from 0.137 to 100 ng/mL with the quantification limit of 0.41 ng/mL. The coefficients of variation (CV%) were 5.42–10.53% for intra-assay and 6.04–7.26% for inter-assay. Cross-reactivities with DDT metabolites (DDTs, including o, p′-DDT, p, p′-DDD, o, p′-DDD, p, p′-DDE, o, p′-DDE, p, p′-dichlorobenzophenone (DCBP), o, p′-DCBP) were investigated. The polyclonal antibody showed relatively low and/or no cross-reactivity with these compounds, and the assay was seen to be highly selective for p, p′-DDT. Moreover, the DDTs could be ranked by their reactivity: DDT > DDD > DDE > DCBP. In addition, the characterization of the polyclonal antibody indicated that the antiserum possesses a high specificity for p, p′-isomers. The results indicated that the developed EIA using this antibody could be a convenient and supplemental analytical tool for monitoring DDT.     

The calcination process in a system for washing, calcinating, and converting treated municipal solid waste incinerator fly ash into raw material for the cement industry

Calcination is the second step in a washing-calcination-conversion system in which treated municipal solid waste incinerator fly ash and bottom ash can be reused as raw material in the cement industry and can decompose or stabilize hazardous compounds, reduce residue amounts, and alter residue characteristics. In this research, only fly ash is discussed. Chloride reduction is important if treated fly ash is to be reused in cement; however, the relationship between washed fly ash properties and chloride reduction by calcination is not well understood. This study used washed residues of three types of fly ash-raw fly ash (RFA) from the boiler or economizer of an incineration system, fly ash collected in a bag filter injected with calcium hydroxide (Ca(OH)2) for acid removal (CaFA), and fly ash collected in a bag filter injected with sodium bicarbonate (NaHCO3) for acid removal (NaFA)-in calcination experiments with varying temperature (400-1100 degrees C) and atmosphere (100% nitrogen [N2] at 25 mL/min or 10% oxygen [O2] [90% N2] at fluxes of 25, 50, and 75 mL/min). From the perspective of chloride reduction, heating to 1000 degrees C with 1-hr heating time, 1-hr holding time, and an atmosphere of 10% O2/90% N2 was most suitable for calcination. Under these conditions, chloride levels were reduced by 91, 52, and 96% in washed residues of RFA, CaFA, and NaFA, respectively. Among the washed residues, the weight of the washed residue of NaFA decreased the most.     

Performance evaluation of intermediate cover soil barrier for removal of heavy metals in landfill leachate

This pilot-scale study evaluated the use of intermediate cover soil barriers for removing heavy metals in leachate generated from test cells for co-disposed fly ash from municipal solid waste incinerators, ash melting plants, and shredder residue. Cover soil barriers were mixtures of Andisol (volcanic ash soil), waste iron powder, (grinder dust waste from iron foundries), and slag fragments. The cover soil barriers were installed in the test cells' bottom layer. Sorption/desorption is an important process in cover soil bottom barrier for removal of heavy metals in landfill leachate. Salt concentrations such as those of Na, K, and Ca in leachate were extremely high (often greater than 30 gL(-1)) because of high salt content in fly ash from ash melting plants. Concentrations of all heavy metals (nickel, manganese, copper, zinc, lead, and cadmium) in test cell leachates with a cover soil barrier were lower than those of the test cell without a cover soil barrier and were mostly below the discharge limit, probably because of dilution caused by the amount of leachate and heavy metal removal by the cover soil barrier. The cover soil barriers' heavy metal removal efficiency was calculated. About 50% of copper, nickel, and manganese were removed. About 20% of the zinc and boron were removed, but lead and cadmium were removed only slightly. Based on results of calculation of the Langelier saturation index and analyses of core samples, the reactivity of the cover soil barrier apparently decreases because of calcium carbonate precipitation on the cover soil barriers' surfaces.     

Development of enzyme immunoassay for detection of DDT

Dichlorodiphenyltrichloroethane (DDT) is one of the persistent organic pollutants (POPs) widely found in the environment and in the general population. In this study, a direct competitive enzyme immunoassay (EIA) has been developed for the quantitative analysis of DDT. To generate a specific polyclonal antibody for EIA, p, p'-DDT was conjugated to porcine thyroglobulin for rabbit immunization. At optimized EIA conditions, the standard curves ranged from 0.137 to 100 ng/mL with the quantification limit of 0.41 ng/mL. The coefficients of variation (CV%) were 5.42-10.53% for intra-assay and 6.04-7.26% for inter-assay. Cross-reactivities with DDT metabolites (DDTs, including o, p'-DDT, p, p'-DDD, o, p'-DDD, p, p'-DDE, o, p'-DDE, p, p'-dichlorobenzophenone (DCBP), o, p'-DCBP) were investigated. The polyclonal antibody showed relatively low and/or no cross-reactivity with these compounds, and the assay was seen to be highly selective for p, p'-DDT. Moreover, the DDTs could be ranked by their reactivity: DDT > DDD > DDE > DCBP. In addition, the characterization of the polyclonal antibody indicated that the antiserum possesses a high specificity for p, p'-isomers. The results indicated that the developed EIA using this antibody could be a convenient and supplemental analytical tool for monitoring DDT.