Drinking water treatment is not associated with an observed increase in neural tube defects in mice

Disinfection by-products (DBPs) arise when natural organic matter in source water reacts with disinfectants used in the water treatment process. Studies have suggested an association between DBPs and birth defects. Neural tube defects (NTDs) in embryos of untreated control mice were first observed in-house in May 2006 and have continued to date. The source of the NTD-inducing agent was previously determined to be a component of drinking water. Tap water samples from a variety of sources were analyzed for trihalomethanes (THMs) to determine if they were causing the malformations. NTDs were observed in CD-1 mice provided with treated and untreated surface water. Occurrence of NTDs varied by water source and treatment regimens. THMs were detected in tap water derived from surface water but not detected in tap water derived from a groundwater source. THMs were absent in untreated river water and laboratory purified waters, yet the percentage of NTDs in untreated river water were similar to the treated water counterpart. These findings indicate that THMs were not the primary cause of NTDs in the mice since the occurrence of NTDs was unrelated to drinking water disinfection.     

Toxicodynamic modeling of 137Cs to estimate white-tailed deer background levels for the Department of Energy's Savannah River Site

The U.S. Department of Energy's (USDOE) Savannah River Site (SRS) is a former nuclear weapon material production and current research facility adjacent to the Savannah River in South Carolina, USA. The purpose of this study was to determine the background radiocesium (¹³⁷Cs) body burden (e.g., from global fallout) for white-tailed deer (Odocoileus virginianus) inhabiting the SRS. To differentiate what the background burden is for the SRS versus ¹³⁷Cs obtained from SRS nuclear activities, data were analyzed spatially, temporally and compared to other off-site hunting areas near the SRS. The specific objectives of this study were: to compare SRS and offsite deer herds based on time and space; to interpret comparisons based on how data were collected as well as the effect of environmental and anthropogenic influences; to determine what the ecological half-life/decay rate is for ¹³⁷Cs in the SRS deer herd; and to give a recommendation to what should be considered the background ¹³⁷Cs level in the SRS deer herd. Based on the available information and analyses, it is recommended that the determination of what is considered background for the SRS deer herd be derived from data collected from the SRS deer herd itself and not offsite collections for a variety of reasons. Offsite data show extreme variability most likely due to environmental factors such as soil type and land-use patterns (e.g., forest, agriculture, residential activities). This can be seen from results where samples from offsite military bases (Fort Jackson and Fort Stewart) without anthropogenic ¹³⁷Cs sources were much higher than both the SRS and a nearby (Sandhills) study site. Moreover, deer from private hunting grounds have the potential to be baited with corn, thus artificially lowering their ¹³⁷Cs body burdens compared to other free-ranging deer. Additionally, sample size for offsite collections were not robust enough to calculate a temporal decay curve with an upper confidence level to determine if the herds are following predicted radioactive decay rates like the SRS or if the variability is due to those points described above. Using mean yearly values, the ecological half-life for ¹³⁷Cs body burdens for SRS white-tailed deer was determined to be 28.79 years—very close to the 30.2 years physical half-life.     

Feature extraction using Hough transform for solid waste bin level detection and classification

This paper deals with the solid waste image detection and classification to detect and classify the solid waste bin level. To do so, Hough transform techniques is used for feature extraction to identify the line detection based on image’s gradient field. The feedforward neural network (FFNN) model is used to classify the level content of solid waste based on learning concept. Numbers of training have been performed using FFNN to learn and match the targets of the testing images to compute the sum squared error with the performance goal met. The images for each class are used as input samples for classification. Result from the neural network and the rules decision are used to build the receiver operating characteristic (ROC) graph. Decision graph shows the performance of the system waste system based on area under curve (AUC), WS-class reached 0.9875 for excellent result and WS-grade reached 0.8293 for good result. The system has been successfully designated with the motivation of solid waste bin monitoring system that can applied to a wide variety of local municipal authorities system.     

Estimating the aquatic emissions and fate of perfluorooctane sulfonate (PFOS) into the river Rhine

The sources, distribution, levels and sinks of perfluorooctane sulfonate (PFOS) estimated to be released from areas of high population density, have been explored using the river Rhine as a case study. A comparison between modelled and measured data is presented, along with analysis of the importance of PFOS sorption in riverine systems. PFOS releases into the Rhine were estimated to be 325-690 kg/yr based on per capita emission rates of 27-57 μg day(-1) from a population of 33 million living within a 50 km zone either side of the river. Sorption of PFOS to suspended particles and sediments may alter its fate in the aquatic environment. Therefore available measured and modelled partitioning data was assessed, and K(d) values (sorption coefficient) of 7.5 and 20 were selected. This resulted in sediment-water ratios of 23-76 : 1, which are similar to ratios reported in the literature, and resulted in modelled estimates that <20% of the total PFOS entering the Rhine binds to sediments or suspended particles. The calculated discharge from the Rhine to the North Sea based on measured data was 420-2200 kg/yr; our model predictions are in good agreement with these estimates. Emission trends were accurately predicted, suggesting population density can be effectively used as a surrogate for diffuse PFOS emissions from product use, while predicted concentrations were a factor of 2-4 below measured data showing the importance of other sources. Transfer of PFOS to sediment is estimated to be minimal, and consequently discharges to the North Sea are roughly equal to PFOS releases to river water.     

Effects of natural organic matter type and concentration on the aggregation of citrate-stabilized gold nanoparticles

The aggregation of 12 nm citrate-stabilized gold nanoparticles (cit-AuNPs) in the presence of four different natural organic matter (NOM) isolates and a monovalent electrolyte (KCl) was evaluated using time-resolved dynamic light scattering. All four NOM isolates stabilized the cit-AuNPs with respect to aggregation. However, specific effects varied among the different NOM isolates. At pH = 6 in 80 mM KCl, low concentrations (<0.25 mg C per L) of large molecular weight Suwannee River Humic Acid (SRHA) was required to stabilize cit-AuNPs, while larger concentrations (>2 mg C per L) of smaller Suwannee River Fulvic Acid (SRFA) were necessary at the same ionic strength. Suwannee River NOM (SRNOM) which contains both SRHA and SRFA behaved in a manner intermediate between the two. Pony Lake Fulvic Acid (PLFA), an autochthonous NOM isolate, provided substantial stability at low concentrations, yet aggregation was induced at NOM concentrations > 2 mg C per L, a trend that is hypothesized to be the result of favourable hydrophobic interactions between coated particles induced at increased surface coverage. For all NOM isolates, it appears that NOM adsorption or conformational changes at the AuNP surfaces result in significant increases in the hydrodynamic diameter that aren't attributable to NP-NP aggregation.     

Utilizing pyrosequencing and quantitative PCR to characterize fungal populations among house dust samples

Molecular techniques are an alternative to culturing and counting methods in quantifying indoor fungal contamination. Pyrosequencing offers the possibility of identifying unexpected indoor fungi. In this study, 50 house dust samples were collected from homes in the Yakima Valley, WA. Each sample was analyzed by quantitative PCR (QPCR) for 36 common fungi and by fungal tag-encoded flexible (FLX) amplicon pyrosequencing (fTEFAP) for these and additional fungi. Only 24 of the samples yielded amplified results using fTEFAP but QPCR successfully amplified all 50 samples. Over 450 fungal species were detected by fTEFAP but most were rare. Twenty-two fungi were found by fTEFAP to occur with at least an average of ≥0.5% relative occurrence. Many of these fungi seem to be associated with plants, soil or human skin. Combining fTEFAP and QPCR can enhance studies of fungal contamination in homes.     

Receptor model-based source apportionment of particulate pollution in Hyderabad, India

Air quality in Hyderabad, India, often exceeds the national ambient air quality standards, especially for particulate matter (PM), which, in 2010, averaged 82.2?±?24.6, 96.2?±?12.1, and 64.3?±?21.2 μg/m³ of PM₁₀, at commercial, industrial, and residential monitoring stations, respectively, exceeding the national ambient standard of 60 μg/m³. In 2005, following an ordinance passed by the Supreme Court of India, a source apportionment study was conducted to quantify source contributions to PM pollution in Hyderabad, using the chemical mass balance (version 8.2) receptor model for 180 ambient samples collected at three stations for PM₁₀ and PM_2.5 size fractions for three seasons. The receptor modeling results indicated that the PM₁₀ pollution is dominated by the direct vehicular exhaust and road dust (more than 60 %). PM_2.5 with higher propensity to enter the human respiratory tracks, has mixed sources of vehicle exhaust, industrial coal combustion, garbage burning, and secondary PM. In order to improve the air quality in the city, these findings demonstrate the need to control emissions from all known sources and particularly focus on the low-hanging fruits like road dust and waste burning, while the technological and institutional advancements in the transport and industrial sectors are bound to enhance efficiencies. Andhra Pradesh Pollution Control Board utilized these results to prepare an air pollution control action plan for the city.     

The LUCAS topsoil database and derived information on the regional variability of cropland topsoil properties in the European Union

Approximately 20,000 topsoil samples were collected in 25 European Union (EU) Member States (EU-27 except Bulgaria and Romania) with the aim to produce the first coherent pan-European physical and chemical topsoil database, which can serve as baseline information for an EU wide harmonized soil monitoring. The soil sampling was undertaken within the frame of the Land Use/Land Cover Area Frame Survey (LUCAS), a project to monitor changes in the management and character of the land surface of the EU. Soil samples have been analysed for basic soil properties, including particle size distribution, pH, organic carbon, carbonates, NPK, cation exchange capacity (CEC) and multispectral signatures. Preliminary studies show the outstanding potential of the dataset for enhancing the knowledge base on soils in the EU. The current paper provides an introduction to the LUCAS Topsoil 2009 project and provides an example of data applicability for cropland assessment by highlighting initial results for regional and national comparisons.     

Systematic evaluation of dissolved lead sorption losses to particulate syringe filter materials

Distinguishing between soluble and particulate lead in drinking water is useful in understanding the mechanism of lead release and identifying remedial action. Typically, particulate lead is defined as the amount of lead removed by a 0.45-μm filter. Unfortunately, there is little guidance regarding selection of filter membrane material and little consideration to the possibility of the sorption of dissolved lead to the filter. The objective of this work was to examine the tendency of 0.45-μm syringe filter materials to adsorb lead. Tests were performed with water containing 40 and 24 μg/L soluble lead at pH 7 buffered with 50 mg C/L dissolved inorganic concentration (DIC). The amounts of lead sorbed greatly varied by filter, and only two filter types, polypropylene and mixed cellulose esters, performed well and are recommended. Great care must be taken in choosing a filter when filtering soluble lead and interpreting filter results.