Euro Chlor Risk Assessment for the Marine Environment Osparcom Region: North Sea - Tetrachloroethylene

This risk assessment on tetrachloroethylene (PER) was carried out specifically for the marine environment, according to the methodology laid down in the EU risk assessment Regulation (1488/94) and the Guidance Document of the EU New and Existing Substances Regulation (TGD, 1997). The study consists of the collection and evaluation of data on effects and environmental concentrations from analytical monitoring programs in large rivers and estuaries in the North Sea area. The risk is indicated by the ratio of the "predicted environmental concentrations" (PEC) and the "predicted no effect concentrations" (PNEC) for the marine aquatic environment. In total, 18 studies for fish, 13 studies for invertebrates and 8 studies for algae have been evaluated. Both acute and chronic toxicity studies have been taken into account and the appropriate assessment factors have been used to define a PNEC value of 51 µg/l. Most of the available monitoring data apply to rivers and estuary waters and were used to calculate PECs. The most recent data (1991-1995) support a typical PEC of 0.2 µg PER/l water and a worst case PEC of 2.5 µg PER/l water. The calculated PEC/PNEC ratios give a safety margin of 20 to 250 between the predicted no effect concentration and the exposure concentration. Additional evaluation of environmental fate and bioaccumulation characteristics showed that no concern is expected for food chain accumulation.     

Linkages of P and Al Export at High Discharge at the Bear Brook Watershed in Maine

Phosphorus chemistry in streams was evaluated at the paired watershed study at the Bear Brook Watershed, Maine. The West Bear catchment has been treated bimonthly since 1989 with 1,800 eq (NH4)2SO4 ha-1 yr-1. East Bear was the untreated reference watershed. During 1993, concentration of total phosphorus (P) in weekly samples from East and West Bear Brook ranged from 0 to 15 g L-1. The median values were 2 and 4 g L-1 for East and West Bear, respectively. During a high discharge event in January of 1995, the concentration of dissolved P remained relatively constant ( 3 g L-1) as pH decreased from 5.63 to 5.08 and from 5.14 to 4.75 in East and West Bear, respectively. The concentration of total P increased to ca. 60 g L-1 during the rising limb of the hydrograph in West Bear, four times the value in East Bear, total P then declined rapidly as discharge remained high followed by an increase. Dissolved Al increased in both streams during the episodic acidification. West Bear, the more acidic, had concentrations of dissolved Al four times those of East Bear (maximum of 1.1 mg L-1 versus 0.25 mg L-1). Acid-soluble particulate Al increased to 0.2 and 4.2 mg L-1 for East and West Bear, respectively, in parallel to total P (but was 102 greater than total P) and then declined in parallel to total P while discharge remained high. Total P, dissolved P, and particulate Al did not relate to pH. Total P and particulate Al and Fe were strongly correlated. Concurrently, base cations remained relatively constant or decreased slightly. Particulate acid-soluble Al exceeded particulate acid-soluble base cations. We hypothesize that the particulate P was occluded in, or adsorbed on, acid-soluble particulate Al(OH)3. This Al(OH)3. This Al(OH)3 precipitates as emerging acidic groundwater degasses CO2 and pH rises. The export of Al and P is greater from the treated watershed because the induced acidification is translocating more Al from soils to the stream. Most of the export of P is related to acid-soluble Al particulate material.     

Artifact evidence in carbonyl compound sampling using the enclosure technique with cuvette system

Biogenic hydrocarbon emission rates from individual plant species have been estimated experimentally placing small plants or branches in enclosures and measuring the emission rates of the compounds. All-Teflon chambers (cuvettes) where air samples are drawn through tubes packed with adsorbents, have been commonly used for plant enclosure. Sampling of carbonyl compounds emitted from plants has been done using 2,4-dinitrophenylhydrazine coated particles and the derivative carbonyl compounds have been analyzed by HPLC-UV. In this work, the enclosure technique using a cuvette for measurements of carbonyl compound emissions from plants was evaluated. Blank measurements in an empty cuvette have revealed quite different results for experiments performed under laboratory and field conditions. Rigorous univariate statistical analysis of the data obtained indicate that the analytical procedure to determine carbonyl compounds at trace levels in emission samples using the cuvette may lead to positive artifacts during field sampling. This analysis applied to laboratory measurements showed no difference in the results for the cuvette and external lines. Multivariate statistical calculations point out that solar light intensity accounts for the high carbonyl compound levels, especially for acetaldehyde, in the empty cuvette.     

Components of variance in male lifetime copulatory and reproductive success in a seed bug

Summary Males and females of the seed bug, Neacoryphus bicrucis Say, were individually numbered in the field in southeastern Georgia (USA) and census taken daily for 6 weeks. Variation in male mating efficiency (ME = no. copulations/no. sightings) exceeded that in females and was significantly greater than that generated by a null model. Lifetime copulatory success, estimated as the product of ME and longevity, ranged from 0 to 41, with ME accounting for over 88% of the variation. Lifetime reproductive success (LRS), estimated as the product of ME, longevity, and clutch size, ranged from 0 to 898. Among males copulating at least once, ME accounted for over 40% of the variation in LRS, while longevity alone or in combination with clutch size accounted for 21% and 46%, respectively, of the variation in LRS. Failure of some males (26%) to copulate contributed 38% of the total variation in LRS. Thus, among males surviving to adulthood, sexual selection pressure arising from variation in ME is approximately as strong a force for phenotypic change as is natural selection pressure arising from variation in longevity.     

A proposed model to include a residual NAPL saturation in a hysteretic capillary pressure-saturation relationship

A residual non-aqueous phase liquid (NAPL) present in the vadose zone can act as a contaminant source for many years as the compounds of concern partition to infiltrating groundwater and air contained in the soil voids. Current pressure-saturation-relative permeability relationships do not include a residual NAPL saturation term in their formulation. This paper presents the results of series of two- and three-phase pressure cell experiments conducted to evaluate the residual NAPL saturation and its impact on the pressure-saturation relationship. A model was proposed to incorporate a residual NAPL saturation term into an existing hysteretic three-phase parametric model developed by Parker and Lenhard [Water Resour. Res. 23(12) (1987) 2187], Lenhard and Parker [Water Resour. Res. 23(12) (1987) 2197] and Lenhard [J. Contam. Hydrol. 9 (1992) 243]. The experimental results indicated that the magnitude of the residual NAPL saturation was a function of the maximum total liquid saturation reached and the water saturation. The proposed model to incorporate a residual NAPL saturation term is similar in form to the entrapment model proposed by Parker and Lenhard, which was based on an expression presented by Land [Soc. Pet. Eng. J. (June 1968) 149].     

CLIMATE CHHANGE SENSITIVITY ASSESSMENT ON UPPER MISSISSIPPI RIVER BASIN STREAMFLOWS USING SWAT1

ABSTRACT: The Soil and Water Assessment Tool (SWAT) model was used to assess the effects of potential future climate change on the hydrology of the Upper Mississippi River Basin (UMRB). Calibration and validation of SWAT were performed using monthly stream flows for 1968–1987 and 1988–1997, respectively. The R² and Nash‐Sutcliffe simulation efficiency values computed for the monthly comparisons were 0.74 and 0.69 for the calibration period and 0.82 and 0.81 for the validation period. The effects of nine 30‐year (1968 to 1997) sensitivity runs and six climate change scenarios were then analyzed, relative to a scenario baseline. A doubling of atmospheric CO₂ to 660 ppmv (while holding other climate variables constant) resulted in a 36 percent increase in average annual streamflow while average annual flow changes of ?49, ?26, 28, and 58 percent were predicted for precipitation change scenarios of ?20, ?10, 10, and 20 percent, respectively. Mean annual streamflow changes of 51,10, 2, ?6, 38, and 27 percent were predicted by SWAT in response to climate change projections generated from the CISRO‐RegCM2, CCC, CCSR, CISRO‐Mk2, GFDL, and HadCMS general circulation model scenarios. High seasonal variability was also predicted within individual climate change scenarios and large variability was indicated between scenarios within specific months. Overall, the climate change scenarios reveal a large degree of uncertainty in current climate change forecasts for the region. The results also indicate that the simulated UMRB hydrology is very sensitive to current forecasted future climate changes.     

Analysis of Flax and Cotton Fiber Fabric Blends and Recycled Polyethylene Composites

Manufacturing composites with polymers and natural fibers has traditionally been performed using chopped fibers or a non-woven mat for reinforcement. Fibers from flax (Linum usitatissimum L.) are stiff and strong and can be processed into a yarn and then manufactured into a fabric for composite formation. Fabric directly impacts the composite because it contains various fiber types via fiber or yarn blending, fiber length is often longer due to requirements in yarn formation, and it controls the fiber alignment via weaving. Composites created with cotton and flax-containing commercial fabrics and recycled high-density polyethylene (HDPE) were evaluated for physical and mechanical properties. Flax fiber/recycled HDPE composites were easily prepared through compression molding using a textile preform. This method takes advantage of maintaining cotton and flax fiber lengths that are formed into a yarn (a continuous package of short fibers) and oriented in a bidirectional woven fabric. Fabrics were treated with maleic anhydride, silane, enzyme, or adding maleic anhydride grafted polyethylene (MAA-PE; MDEX 102-1, Exxelor^® VA 1840) to promote interactions between polymer and fibers. Straight and strong flax fibers present problems because they are not bound as tightly within yarns producing weaker and less elastic yarns that contain larger diameter variations. As the blend percentage and mass of flax fibers increases the fabric strength, and elongation generally decrease in value. Compared to recycled HDPE, mechanical properties of composite materials (containing biodegradable and renewable resources) demonstrated significant increases in tensile strength (1.4–3.2 times stronger) and modulus of elasticity (1.4–2.3 times larger). Additional research is needed to improve composite binding characteristics by allowing the stronger flax fibers in fabric to carry the composites load.     

A chemox treatment for urea‐ and ammonium‐contaminated groundwater

In a pilot project performed at a fertilizer manufacturing facility, a one‐step chemical oxidation technique successfully treated urea‐ and ammonium‐contaminated groundwater. The oxidation reaction occurred in an 1,100‐gallon batch reactor. The contaminated inflow was buffered by the metered addition of sodium bicarbonate solution and subsequently treated with sodium hypochlorite in an 8:1 weight ratio of Cl₂:N. In an instantaneous reaction, the urea and ammo‐nium‐N were completely oxidized to nitrogen gas that was vented to the atmosphere during mixing. The pH of the reactor discharge was ?6.5. Sodium sulfite was used to reduce residual hypochlorite in the reactor effluent to chloride to provide process water with characteristics suitable for discharge. Oxidation rates were similar with different strengths of hypochlorite; however, a 5 to 6 percent sodium hypochlorite (as Cl₂) solution was the most stable. © 2005 Wiley Periodicals, Inc.     

A Review of Contributions to Disasters: 1977—1996

Since the first issue in 1977, Disasters has been one of the pre-eminent refereed journals on the study and reporting of disasters. This article reviews 703 articles and reports in the journal through 1996 to provide a snapshot of the nature of the journal throughout 20 years of publication. The results indicate the most common contributions: first, were research articles by authors from the North Atlantic; second, most often dealt with natural disaster relief or impact; and third, most frequently focused on Africa. These generalisations, however, do not reflect attention paid to food-related and political disasters and greatly understate the broad diversity of material presented in the journal. To improve the topical and geographic coverage of Disasters probably requires a proactive effort to close gaps in the journal's coverage of disasters.