Temporal variations of 90Sr and 137Cs concentrations and the 137Cs/90Sr activity ratio in marine brown algae, Undaria pinnatifida and Laminaria longissima, collected in coastal areas of Japan

The anthropogenic radionuclides, 90Sr and 137Cs, were measured in two marine algal species, wakame seaweed (Undaria pinnatifida) and edible kelp (Laminaria longissima), collected in four coastal areas of Japan during 1998-2008. Although 90Sr and 137Cs could be detected at all sampling sites, the concentrations of 90Sr and 137Cs were at low levels and those in some samples were below the detection limit. These low concentrations and the small variation of both concentrations and the 137Cs/90Sr activity ratio indicate that the source of 90Sr and 137Cs detected in this study originated from the global fallout deposition following atmospheric nuclear-bomb tests in the past. There were no significant differences in both concentrations of 90Sr and 137Cs in wakame seaweed among three sampling sites. Although wakame seaweed is extensively distributed in southern and central Japan, it does not occur in northern areas and so edible kelp was monitored. The concentrations of 90Sr and 137Cs in edible kelp were significantly different from those in wakame seaweed in some sampling sites. These differences could be due to the difference in the concentrations of 90Sr and 137Cs in the surrounding seawater or the difference in species. The combined data with data from the previous report and the preexisting database showed that wakame seaweed incorporated 137Cs through a different pathway from that of 90Sr. The combined data also suggested that wakame seaweed responded differently to the source of 137Cs.     

Separate estimation of N export into baseline N leakage without disturbance and N loss due to insect defoliation in a pine forest watershed in central Japan

Pine wilt disease (PWD) is caused by a non-native pest that has spread extensively throughout Japan. Previous research has indicated that most infected trees have died and the litter deposited has resulted in changes to stream-water chemistry, particularly increased nitrate (NO ₃ ^? ) concentrations. In this study, we divided stream nitrogen (N) export into N loss due to PWD and baseline N leakage without disturbance based on long-term monitoring. The annual N export was 110.0 mol N ha^?1 year^?1 in 1990 and 749.8 mol N ha^?1 year^?1 in 1997, and had decreased to 37.0 mol N ha^?1 year^?1 in 2005. N export under PWD influence was estimated to be 3697 mol N ha^?1, and N loss due to PWD was 2810 mol N ha^?1. N loss due to PWD was three times larger than baseline N leakage for the disturbed period. These changes in plant–herbivore relationships could affect N status in a forest ecosystem. So-called “semi-natural” disturbances related to non-native species invasion and increases of atmospheric N deposition caused by human activity will increase. Long-term monitoring studies of various aspects are necessary to offer insight into this ecosystem.     

The effects of tertiary treated municipal wastewater on fish communities of a small river tributary in Southern Ontario, Canada

Fish community changes associated with a tertiary treated municipal wastewater effluent outfall in the Speed River, Ontario, Canada, were evaluated at nine sites over two seasons (2008) using standardized electrofishing. Habitat evaluations were conducted to ensure that the riffle sites selected were physically similar. The fish community was dominated by several species of darters that differed in their response to the effluent outfall. There was a significant decrease in Greenside Darter (Etheostoma blennioides) but an increase in Rainbow Darter (E. caeruleum) abundance directly downstream of the outfall. Stable isotope signatures (δ¹³C and δ¹⁵N), which indicate shifts in energy utilization and flow, increased in Rainbow Darter downstream, but showed no change in Greenside Darter. Rainbow Darter may be exploiting a food source that is not as available at upstream sites giving them a competitive advantage over the Greenside Darter immediately downstream of the outfall.     

Process analysis of ozone formation under different weather conditions over the Kanto region of Japan using the MM5/CMAQ modelling system

We have assessed the contributions of individual physical and chemical atmospheric processes on ozone formation under different weather conditions during a typical summer month (August 2005) using the MM5/CMAQ modelling system. We found that the ozone episodes in the Kanto region are dominated by three major patterns, of which Patterns I and II are regular summertime pressure patterns with a 26% and 16% frequency of occurrence, respectively. A process analysis at two typical sites in the Kanto region – one located in the central region of Tokyo and the other located in the rural areas of Kanto – indicates that ozone formation is mainly controlled by advection, vertical diffusion, dry deposition, and chemical processes. The ground-level ozone concentrations are enhanced mainly by the vertical mixing of ozone-rich air from aloft, whereas the dry deposition and chemical processes mainly deplete ozone. By investigating the effects of each process under different weather conditions, we found that the significant decrease in ozone removal due to the chemical and advection processes under conditions of high stagnation is the most important cause of the enhanced levels of ozone in the central region of Tokyo. The results of this study can contribute to a better understanding of ozone formation in the Kanto region, and they may be valuable for local policy makers for further development planning.     

Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls

We developed a novel polymer type sulfoxide-modified solid phase enabling to achieve selective separation of polychlorinated biphenyls (PCBs) from insulation oil. In this study, firstly we prepared base-polymer based on the concept of the molecular imprinting to capture PCBs in selectively, then, the sulfoxide groups were modified on the pore surface of base-polymers by changing preparation methods. As results of liquid chromatographic analyses for the polymers as columns, the base-polymer prepared by xylene as a porogenic solvent showed selective retention ability for chlorinated aromatic compounds by the porogen imprinting effect. Additionally, the polymer-type sulfoxide solid phases showed highly retention ability for PCBs by increasing amount of introduced sulfoxide groups. Consequently, the results of separation of PCBs comparing to insulation oil suggested that the prepared solid phase can be used for the selective separation of PCBs at the same level as a commercially available media utilized for the regulated method.     

Bench-scale gasification of cedar wood – Part I: Effect of operational conditions on product gas characteristics

The present study was conducted within the framework of R&D activities on the development of gasification and reforming technologies for energy and chemical recovery from biomass resources. Gasification of the Japanese cedar wood has been investigated under various operating conditions in a bench-scale externally heated updraft gasifier; this was followed by thermal reforming. Parametric tests by varying the residence times, gasification temperatures, equivalence ratios (ERs) and steam-to-carbon (S/C) ratios were performed to determine their effects on the product gas characteristics. Thermodynamic equilibrium calculations were preformed to predict the equilibrium gas composition and compared with the experimental value.We found that the product gas characteristics in terms of the H₂/CO ratio, CO₂/CO ratio, and CH₄ and lighter hydrocarbons concentrations are significantly affected by the operating conditions used. Increasing the residence time decreased the CO₂/CO ratio; however, a nominal effect was noticed on H₂ concentration as a function of the residence time. At sufficient residence time, increasing the temperature led to higher H₂ yields, CO efficiency and higher heating value (HHV) of the product gas. The presence of steam during gasification effectively enhanced the proportion of H₂ in the product gas. However, higher S/C ratio reduced the HHV of the product gas. Increasing the ER from 0 to 0.3 increased the H₂ yields and CO efficiency and decreased the HHV of the product gas.The evolution of CH₄ and lighter hydrocarbons at low gasification temperatures was relatively higher than that at high temperature gasification. The evolution of CH₄ and lighter hydrocarbons at high gasification temperatures hardly varied over the investigated operating conditions.     

Characterization of temporal variations in landfill gas components inside an open solid waste dump site in Sri Lanka

A long-term monitoring of composition of landfill gases in the region with high rainfall was conducted using an argon assay in order to discuss air intrusion into the dump site. Gas samples were taken from vertical gas monitoring pipes installed along transects at two sections (called new and old) of an abandoned waste dump site in Sri Lanka. N₂O concentrations varied especially widely, by more than three orders of magnitude (0.046–140 ppmv). The nitrogen/argon ratio of landfill gas was normally higher than that of fresh air, implying that denitrification occurred in the dump site. Argon assays indicate that both N₂ and N₂O production occurred inside waste and more significantly in the old section. The Ar assay would help for evaluations of N₂O emission in developing countries.

Implications: A long-term monitoring of composition of landfill gases in the region with high rainfall was conducted using an argon assay in order to discuss air intrusion into the dump site. Argon assays indicate that both N₂ and N₂O production occurred inside waste and more significantly in the old section.     

Light-Duty Motor Vehicle Exhaust Particulate Matter Measurement in the Denver,Colorado, Area

ABSTRACT

A study of particulate matter (PM) emissions from in-use, light-duty vehicles was conducted during the summer of 1996 and the winter of 1997 in the Denver, CO, region. Vehicles were tested as received on chassis dynamometers on the Federal Test Procedure Urban Dynamometer Driving Schedule (UDDS) and the IM240 driving schedule. Both PM10 and regulated emissions were measured for each phase of the UDDS. For the summer portion of the study, 92 gasoline vehicles, 10 diesel vehicles, and 9 gasoline vehicles with visible smoke emissions were tested once. For the winter, 56 gasoline vehicles, 12 diesel vehicles, and 15 gasoline vehicles with visible smoke were tested twice, once indoors at 60 °F and once outdoors at the prevailing temperature. Vehicle model year ranged from 1966 to 1996. Impactor particle size distributions were obtained on a subset of vehicles. Continuous estimates of the particle number emissions were obtained with an electrical aerosol analyzer. This data set is being provided to the Northern Front Range Air Quality Study program and to the State of Colorado and the U.S. Environmental Protection Agency for use in updating emissions inventories.     

Effects of Equilibration Temperature on PM10 Concentrations from the TEOM Method in the Lower Fraser Valley

ABSTRACT

This study investigated the effect of equilibration temperature on PM₁₀ concentrations from the tapered element oscillating microbalance (TEOM) method by operating collocated TEOM monitors at different equilibration temperatures in an airshed (the Lower Fraser Valley, British Columbia). This airshed contained an abundance of par-ticulate semivolatile material (PSVM). For the period when three collocated TEOM monitors were operated, the PM₁₀ from the monitor at an equilibration temperature of 30 ° C was 2.5 μ g/m³ (22%) and 1.7 (17%) μ g/m³ higher, on average, than the PM₁₀ from monitors at 50 and 40 ° C, respectively, and the differences were proportional to the ambient PM₁₀ loading. Greater volatilization of PSVM in the TEOM monitors at higher equilibration temperatures may have been a cause of the differences.     

Full-Scale Evaluation of Mercury Control with Sorbent Injection and COHPAC at Alabama Power E.C. Gaston

Abstract

The overall objective of this project was to determine the cost and impacts of Hg control using sorbent injection into a Compact Hybrid Particulate Collector (COHPAC) at Alabama Power’s Gaston Unit 3. This test is part of a program funded by the U.S. Department of Energy’s National Energy Technology Laboratory (NETL) to obtain the necessary information to assess the costs of controlling Hg from coal-fired utility plants that do not have scrubbers for SO₂ control. The economics will be developed based on various levels of Hg control.

Gaston Unit 3 was chosen for testing because COHPAC represents a cost-effective retrofit option for utilities with existing electrostatic precipitators (ESPs). COHPAC is an EPRI-patented concept that places a high air-to-cloth ratio baghouse downstream of an existing ESP to improve overall particulate collection efficiency. Activated carbons were injected upstream of COHPAC and downstream of the ESP to obtain performance and operational data.

Results were very encouraging, with up to 90% removal of Hg for short operating periods using powdered activated carbon (PAC). During the long-term tests, an average Hg removal efficiency of 78% was measured. The PAC injection rate for the long-term tests was chosen to maintain COHPAC cleaning frequency at less than 1.5 pulses/bag/hr.