Evaluating Japanese policy instruments for the promotion of renewable energy sources

In Japan, the Renewable Portfolio Standard (RPS) and the Feed-in-Tariff (FIT) have been used for the exploitation of renewable energy sources (RES). Although these are significant to enhance the use of RES, the RES penetration is not reaching the expected percentage. The identification of their strengths/weaknesses will allow their improvement for achieving the target. This paper concerned the evaluation of RPS and FIT using a multi-criteria evaluation method. First, official data/information were used to assess their performance using the method. Second, national experts were asked about their performance to verify the outcomes. We found FIT was more effective than RPS.     

Hydrocarbon Production and Photochemical Ozone Formation in Forest Burn Plumes

The purpose of this paper is to describe ozone production in forest slash burn plumes. Plumes from controlled fires in the state of Washington were monitored using an instrumented aircraft. Ozone, oxides of nitrogen, condensation nuclei, and visual range (nephelometer) were measured continuously on board the plane. Airborne grab samples were collected for detailed hydrocarbon analysis.

The slash burn plumes were found to contain significant quantities of ozone. A buildup of 40–50 ppb above the ambient background ozone concentrations was not unusual. Hydrocarbon analyses revealed the presence of many photochemically reactive olefins in the plume. Hydrocarbon/NO _x ratios were favorable for photochemical oxidant production.     

Formaldehyde Concentrations Inside Private Residences: A Mail-Out Approach to Indoor Air Monitoring

Abstract

The main objective of this study was to monitor the volatile organic compounds (VOCs) in the stack gas released from organic chemical industrial plants to determine emission factors. Samples from 52 stacks, with or without air pollution control devices (APCDs), from seven industrial processes were taken and VOCs measured using U.S. Environmental Protection Agency (EPA) Method 18. These 7 processes, including 26 plants, were the manufacturers of acrylonitrile–butadiene–styrene (ABS), polyvinyl chloride (PVC), polystyrene (PS), acrylic resin (ACR), vinyl chloride (VC), para–terephthalic acid (PTA), and synthetic fiber (SYF). The results clearly indicate significant variations of emission factors among the various industrial processes, particularly emission factors for those without APCDs. As expected, those with APCDs yield much less emission factors. Regardless of those with or without APCDs, the order of manufacturing processes with regard to VOC emission factors is SYF > ABS > PS > ACR > PTA > PVC > VC. The emission factors for some processes also differ from those in EPA–42 data file. The VOC profiles further indicate that some VOCs are not listed in the U.S. VOC/Particulate Matter Speciation Data System (SPECIATE). The potential O₃ formation is determined from the total amount of VOC emitted for each of seven processes. The resultant O₃ yield varied from 0.22 (ACR) to 2.33 g O₃ g^–1 VOC (PTA). The significance of this O₃ yield is discussed.     

Adsorption characteristics of carbonaceous adsorbents for organic pollutants in a model incineration exhaust gas

Adsorption characteristics of carbonaceous adsorbents were examined using 1,2,3,4-tetrachlorobenzene, naphthalene and 2,4,6-tribromophenol as adsorbates. The breakthrough and equilibrium adsorption characteristics were evaluated using laboratory-scale adsorption test equipment. A micropore volume of diameter less than 2 nm is the most important factor governing the adsorption capacity of all adsorbates. A kinetic analysis was performed and the adsorption behavior of the adsorbates was analyzed. Diffusion within porous particles controls the adsorption rate in this system, and the diffusion process is a function of pore diffusion. The operating conditions in working incineration facility adsorbers were reviewed and the breakthrough time of these adsorbents in actual adsorbers was estimated using the mass transfer zone method. Information on the optimal operating conditions of adsorbers was derived from the adsorption breakthrough characteristics.     

Adsorption of arsenic(V) onto fly ash: a speciation-based approach

Arsenic (As) poses a significant water quality problem and challenge for the environmental engineers and scientists in the world. The large volume of coal fly ash produced around the world is a potentially significant anthropogenic source of arsenic. Currently the leaching behavior of arsenic from fly ash is not well understood. Batch methods were used in this study to investigate arsenic leaching using a raw ash, and arsenic adsorption using a clean, washed ash. Experimental results indicated that pH had a significant effect on arsenic leaching or adsorption. Between pH 3 and 7, less arsenic was in the dissolved phase. When pH was less than 3 or greater than 7, increasing amounts of arsenic were leached or desorbed from fly ash. The leaching and adsorption behavior of arsenic was interpreted with the speciation of surface sites and arsenic. In a new approach, a speciation-based model was developed to quantify the arsenic adsorption as a function of pH and surface acidity parameters. This work is important in offering insight into the leaching mechanism of arsenic from coal fly ash, and providing a robust model based upon specific, measurable parameters to quantify arsenic adsorption by other solid media in addition to fly ash.     

Elimination of 10 polybrominated diphenyl ether (PBDE) congeners and selected polychlorinated biphenyls (PCBs) from the freshwater mussel, Elliptio complanata

Mussel biomonitors are widely used as screening tools for polybrominated diphenyl ethers (PBDEs) in marine and aquatic environments. This study determined elimination rate coefficients (k(tot)) for eight PBDE and five PCB congeners in the freshwater mussel, Elliptio complanata, over a 120d depuration period. Elimination of BDE 15, 28, 47, 75 and 100 was similar to PCBs of equivalent hydrophobicity and negatively related to chemical K(OW). Rapid elimination of BDE 190 and an inferred rapid elimination of BDE 183 indicate mussels are capable of biotransformation of certain highly brominated PBDEs. Time to 90% steady state ranged from 48 to 66d for di- and tribromoDE congeners and from 91 to >250d for tetra- to hexabromoDE congeners. Given the long time periods required for steady state, mussel accumulated PBDE residues should be interpreted in the context of calibrated bioaccumulation models.     

Evaluation of the STP model: comparison of modelled and experimental results for ten polycyclic aromatic hydrocarbons (PAHs)

Screening level risk assessment models are used by many countries to assess the treatability of organic chemicals during the sewage treatment process, especially those that are new to commerce. The performance of one such model, the sewage treatment plant model, is evaluated in the current study by comparing model predictions with actual measurement data collected at various stages of a typical full-scale activated sludge type sewage treatment plant. A suite of ten polycyclic aromatic hydrocarbons (PAHs) with widely varying physico–chemical properties were monitored for the comparison. Model predicted removal efficiencies were in very good agreement with those measured for all ten PAHs. Observed chemical concentrations and their trends at various stages of the sewage treatment process were also well simulated by the model. Results also suggest that a reasonable first approximation estimate of a range for the biodegradation half-life needed for the model may be obtained by dividing reported aqueous biodegradation half-life by scaling factors of 50 and 150.     

Quantifying the availability and the stability of trace cationic elements in fly ash

For adsorption-desorption controlled leaching processes, the total leachable mass and the adsorption constant are parameters representing the availability and the stability of trace elements in solid media. With these parameters, one can predict the leaching behavior of trace elements from solids under various pH and solid-to-liquid ratio conditions. An approach was developed in this paper to determine these parameters for model elements Cu(II), Cd(II), and Ni(II) in fly ash. This approach consists of a batch equilibrium titration, a batch equilibrium leaching with and without target element addition, and mathematical modeling. Results indicated that the adsorption constant of a trace element can be determined by modeling the adsorption ratio of the added element to the system as a function of pH. Results also indicated that the trace element originally present in fly ash had similar adsorption-desorption behavior as that added externally. By modeling the batch leaching data with and without external element addition, the total leachable mass and adsorption constant of the target element can be determined simultaneously. The total leachable mass is in agreement with experimental data from 50mM EDTA extraction.