Measurements of aerosol optical properties in central Tokyo during summertime using cavity ring-down spectroscopy: Comparison with conventional techniques

A highly sensitive cavity ring-down spectrometer (CRDS) was used to monitor the aerosol extinction coefficient at 532 nm. The performance of the spectrometer was evaluated using measurements of nearly monodisperse polystyrene particles with diameters between 150 and 500 nm. By comparing the observed results with those determined using Mie theory, the accuracy of the CRDS instrument was determined to be >97%, while the upper limit for the precision of the instrument was estimated to be 0.6–3.5% (typically 2%), depending on the particle number concentration, which was in the range of 30–2300 particles cm^?3. Simultaneous measurements of the extinction (b_ext), scattering (b_sca) and absorption (b_abs) coefficients of ambient aerosols were performed in central Tokyo from 14 August to 2 September 2007 using the CRDS instrument, two nephelometers and a particle/soot absorption photometer (PSAP), respectively. The value of b_ext measured using the CRDS instrument was compared with the sum of the b_sca and b_abs values measured with a nephelometer and a PSAP, respectively. Good agreement between the b_ext and b_sca + b_abs values was obtained except for data on days when high ozone mixing ratios (>130 ppbv) were observed. During the high-O₃ days, the values for b_sca + b_abs were ～7% larger than the value for b_ext, possibly because the value for b_abs measured by the PSAP was overestimated due to interference from coexisting non-absorbing aerosols such as secondary organic aerosols.     

Development of new footwear sole surface pattern for prevention of slip-related falls

In this study, a new rubber surface pattern for a footwear sole was developed to prevent slip-related falls. This pattern shows a high static coefficient of friction (SCOF) and a high dynamic coefficient of friction (DCOF) when sliding against a liquid contaminated surface. A hybrid rubber block, in which a rubber block with a rough surface (Ra = 30.4 μm) was sandwiched between two rubber blocks with smooth surfaces (Ra = 0.98 μm), was prepared. The ratio of the rough surface area to the whole rubber block surface area r was 0%, 30%, 50%, 80%, and 100%. The coefficient of friction of the rubber blocks was measured when sliding against a stainless steel plate with Ra of 0.09 μm contaminated with a 90% aqueous solution of glycerol. While the SCOF increased with an increase of the rough surface area ratio r, the DCOF during steady-state sliding decreased with an increase of the rough surface area ratio r. The rough surface area ratio of 50% achieved a SCOF value around 0.5 or more and a DCOF value greater than 0.5. Furthermore, the difference in the value of the SCOF and DCOF was the smallest for the rubber block with r of 50%. The results indicated that the rubber block with r of 50% would be applicable to a footwear sole surface pattern to prevent slip and fall accidents on contaminated surfaces.     

催化湿式氧化法处理高浓度有机废水的动力学模型

在２７０℃、８．８ＭＰａ条件下用催化湿式氧化法试验处理高浓度工业有机废水,反应时间１０￣１５ｍｉｎ时,废水中ＴＯＣ浓度可由１７９００ｍｇ／Ｌ降至１００ｍｇ／Ｌ以下。针对这一多相催化氧化反应过程,以ＴＯＣ为目标污染和,研究建立了涉及液、气、固三相的反应动力学模型。反应时间、瓜器ＴＯＣ浓度、反应压力和反应温度等主要因素对反应器净化ＴＯＣ性能影响的试验表明,该模型计算值与实验值有很好的相关性（相关系数Ｒ     

Melting and incineration plants of municipal waste. Chemical and biochemical diagnosis of thermal processing samples (emission,residues)

Control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in emissions and thermal residues from incinerators has been a cause of public concern for more than one decade. Recently, several studies showed that other persistent organic pollutants (POPs) such as coplanar polychlorinated biphenyls (co-PCBs) also have dioxin-like activity and are released from incinerators. Therefore, the present study was aimed at making a risk assessment about dioxin-like activity in extracts of thermal waste residues (e.g. combustion gas; fly ash, slag) from incineration and melting processes in Germany and Japan. For this purpose, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (co-PCBs), polychlorinated naphthalenes (PCNs) and polyaromatic hydrocarbons (PAHs) were analyzed by chemical analysis. Additionally, 2, 3, 7, 8-TCDD equivalents (EROD-TEQs) were determined by in vitro Micro-EROD bioassay using rat H4IIE hepatoma cells. EROD-TEQs could be correlated to I-TEQ values (from PCDD/Fs/co-PCBs) analyzed by chemical analysis resulting in a maximal sixfold higher estimate. Our study indicates minor influences of co-PCBs, PAHs and PCNs to the sum of dioxin-like toxicity in the extracts of thermal waste residues as determined here. Furthermore, we showed that the levels of dioxins and co-PCBs contained in slag from melting processes and bottom ashes from incineration processes were lower by 1-2 orders of magnitude than that in fly ash.     

Modeling groundwater flow and its associated environmental problem in a lowland coastal plain: a first step towards a sustainable development plan

Groundwater is an important resource in the alluvial coastal lowland plains. In the Shiroishi lowland plain, southwestern Kyushu Island of Japan, land subsidence due to groundwater development has long been recognized as an environmental issue. Land subsidence can have several negative economic and social implications. In this study, an integrated numerical groundwater and land subsidence model, which combines a three-dimensional numerical groundwater flow model and a one-dimensional soil consolidation model, was used to simulate the dynamic groundwater flow and ground subsidence due to pumping. On the other hand, a groundwater optimization model was also formulated to search for an optimal safe yield of groundwater pumping without violating physical, environmental, social-economic constraints. The model results reveal that groundwater levels in the aquifers greatly vary from season to season in response to varying climatic and pumping conditions. Consequently, land subsidence has rapidly occurred throughout the area with the central prone in Shiroishi plain. The study also proposes a countermeasure against subsiding process in the area by means of numerical models. The optimization model result suggests that pumping can be increased in the northern part of the study area without leading to significant land subsidence.     

Trends in waste plastics and recycling

Zero emission is an ambitious project aimed at the conversion of the conventional top-down or one-directional flow type production systems of modern society to those of a recycling type. The basic idea underlying this project is to understand in detail the material flow mechanism in a particular segment of society and to evaluate the transformability of the hitherto one-directional types of process into recycling types. The authors, members of the Zero-Emission Research Group of Japan, are investigating the material flow of plastics in Japan. The present work describes the features of this project, as well as the results obtained so far. Received: May 28, 1998 / Accepted: October 16, 1998     

Unique bioconcentration characteristics of new aryl fluoroalkyl ethers in common carp (Cyprinus carpio)

The bioconcentration factors (BCFs) of seven new aryl fluoroalkyl ethers--four bis-4-tetrafluoroethoxyphenyl-type (bis-type) compounds and three mono-4-tetrafluoroethoxyphenyl-type (mono-type) compounds--were obtained by bioconcentration tests using common carp. The BCFs of 4 of the 7 ethers were higher than 5000, indicating their high bioconcentration potential. The bioconcentration characteristics of the bis-type compounds were different from those of the mono-type compounds and non-fluoro diphenylmethanes with a similar skeleton structure to the bis-type compounds, in taking longer to reach a plateau and having a slower elimination rate and in their distribution patterns in the fish body. The BCF of 1 bis-type compound was much higher than the value predicted by an accepted correlation equation between BCF and P(ow). In addition, the logP(ow) of the bis-type compounds calculated by commercially available computer software was remarkably different from that measured.     

Development of an environmentally acceptable volatile organic compounds recovery and reuse system based on vacuum spray flash with dibasic acid esters as absorbents

We used dibasic acid esters as the absorbent for a volatile organic compounds (VOC) recovery and reuse system geared mainly toward VOCs from painting and presswork. The system consists of three elements: absorption using dibasic acid esters, separation by vacuum spray flash method, and recovery by condensation. The concentration of both ethyl acetate (EtAc) and isopropyl alcohol (IPA) decreased around 90% at room temperature. Vacuum spray flash was found as a useful process for cost-effective and energy-effective VOC removal system. The difference in the dissolubility parameters (Hansen constant) between dibasic acid esters and VOCs and the boiling point of VOCs was the main contributor to the separation behavior.     

Detection of Escherichia coli in a cattle manure composting process by selective cultivation and colony polymerase chain reaction

Livestock manure is suitable for use as a composting material. However, various intestinal microbes, such as Escherichia coli, are significant components of such manures. Thus, it is desirable that the level of intestinal microbes, and particularly opportunistic pathogens, in compost is inspected and counted regularly. The sensitivity and specificity of detection of E. coli in compost have been improved by selective cultivation followed by colony polymerase chain reaction (PCR) using the ECO primer. Indeed, the sensitivity of this method is higher than that of DNA extraction from compost and PCR. In this study, changes in numbers of E. coli present in a field-scale composting process over time was assessed using selective cultivation and colony PCR. Numbers of ECO-positive colonies after 24 h decreased, with a concomitant rise in compost temperature. ECO-positive colonies were not detected from 33 to 48 h. However, ECO-positive colony numbers increased beginning on day 4 and continuing until day 42. Thus, it seems likely that the high temperatures reached during the composting process did not affect E. coli numbers in the final compost. Additionally, selective cultivation followed by colony PCR using specific primers is an appropriate method of determining levels of cultivable pathogens in composted materials.     

The significance of heterogeneity on mass flux from DNAPL source zones: an experimental investigation

Understanding the process of mass transfer from source zones of aquifers contaminated with organic chemicals in the form of dense non-aqueous phase liquids (DNAPL) is of importance in site management and remediation. A series of intermediate-scale tank experiments was conducted to examine the influence of aquifer heterogeneity on DNAPL mass transfer contributing to dissolved mass emission from source zone into groundwater under natural flow before and after remediation. A Tetrachloroethylene (PCE) spill was performed into six source zone models of increasing heterogeneity, and both the spatial distribution of the dissolution behavior and the net effluent mass flux were examined. Experimentally created initial PCE entrapment architecture resulting from the PCE migration was largely influenced by the coarser sand lenses and the PCE occupied between 30 and 60% of the model aquifer depth. The presence of DNAPL had no apparent effect on the bulk hydraulic conductivity of the porous media. Up to 71% of PCE mass in each of the tested source zone was removed during a series of surfactant flushes, with associated induced PCE mobilization responsible for increasing vertical DNAPL distributions. Effluent mass flux due to water dissolution was also found to increase progressively due to the increase in NAPL-water contact area even though the PCE mass was reduced. Doubling of local groundwater flow velocities showed negligible rate-limited effects at the scale of these experiments. Thus, mass transfer behavior was directly controlled by the morphology of DNAPL within each source zone. Effluent mass flux values were normalized by the up-gradient DNAPL distributions. For the suite of aquifer heterogeneities and all remedial stages, normalized flux values fell within a narrow band with mean of 0.39 and showed insensitivity to average source zone saturations.