Desiccation,higher temperatures and upper intertidal limits of three species of sea mussels (Mollusca: Bivalvia) in New Zealand

Distribution, abundance, and resistance adaptations to higher temperature and desiccation of three species of intertidal mussels (Mytilus edulis aoteanus, Perna canaliculus and Aulacomya maoriana) were studied in New Zealand. M. edulis aoteanus generally was more abundant upshore, with P. canaliculus dominating downshore. M. edulis aoteanus was more common than P. canaliculus on the outside of mixed-species clumps. Abundance of A. maoriana was variable, with individuals favouring damp habitats such as inside mussel clumps. In moving air at 75% relative humidity and at 20°C or 30°C, median lethal levels of water loss were similar for P. canaliculus and M. edulis aoteanus but lower for A. maoriana. Rates of desiccation varied inversely with size and were higher for P. canaliculus, due mainly to valve gaping with resultant loss of water from the mantle cavity. M. edulis aoteanus was more tolerant of higher water temperatures than were the other species. Success in colonizing upshore or more aerially exposed habitats seems to be related to ability of small mussels to tolerate desiccation, especially during hot, windy weather.     

Manganese and other trace elements in urban snow near an expressway

The Mn contamination arising from the combustion of MMT (methylcyclopentadienyl manganese tricarbonyl) in unleaded gasoline was assessed using snow collected at different distances 15, 25, 125 and 150 m from an expressway (Montreal, Canada) in February 1993. The snow samples were analyzed by atomic absorption and by neutron activation for total Mn, Mg, Cu, V, Al, Zn, Fe, Na, and Ca concentrations in the soluble (<0.4 microm) and particulate fractions. ANOVA with ranked values was performed to compare element concentrations and soluble/particulate ratios among receptor sites and depths. Principal component analysis was used to describe the spatiotemporal variations of the deposition rates and the influence of meteorological factors. The average concentration of all trace elements, except Mg, Cu, and V, decreased significantly (p<0.05) from receptor sites near the road (15-25 m) to those farther away (125-150 m). The deposition rates of all metals and ions, except Cu, were highly positively correlated (tau = 0.5-0.9) with each other and inversely correlated with snowfalls. Wind frequency showed no correlation with deposition rate. The spatial trend was similar for all these elements making it difficult to distinguish Mn arising from the combustion of MMT from that due to other sources, such as road dust. Only the soluble/particulate ratio calculated for Mn seemed higher than that for the other metals, which might be explained by the particle size of Mn from MMT (0.2-0.4 microm). The present study only indicates a direct contamination of the snow by road activities and substantial deposition of trace elements near the roadway; no clear link can be established between motor vehicle emissions and the concentration of Mn in snow.     

A global Bayesian sensitivity analysis of the 1d SimSphere soil–vegetation–atmospheric transfer (SVAT) model using Gaussian model emulation

Sensitivity analysis consists of an integral and important validatory check of a computer simulation model before the code is used in performing any kind of analysis operation. The present paper demonstrates the use of a relatively new method and tool for conducting global sensitivity analysis (GSA) for environmental models, providing simultaneously the first GSA study of the widely used 1d soil–vegetation–atmospheric transfer (SVAT) model named SimSphere. A software platform called the Gaussian emulation machine for sensitivity analysis (GEM SA), which has been developed for performing a GSA via Bayesian theory, is applied to SimSphere model in order to identify the most responsive model inputs to the simulation of key model outputs, detect their interactions and derive absolute sensitivity measures concerning the model structure. This study is also very timely in that, use of this particular SVAT model is currently being considered to be used in a scheme being developed for the operational retrieval of the soil surface moisture content by National Polar-orbiting Operational Environmental Satellite System (NPOESS), in a series of satellite platforms that are due to be launched in the next 12 years starting from 2016.The employed GSA method was found capable of identifying the most responsive SimSphere inputs and also of capturing their key interactions for each of the simulated target quantities on which the GSA was conducted. The most sensitive model inputs were the topography parameters (slope, aspect) as well as the fractional vegetation cover and soil surface moisture availability. The implications of these findings for the future use of SimSphere are discussed.     

Current and historic distribution and abundance of the inarticulated brachiopod, <Emphasis Type="Italic">Lingula reevii</Emphasis> Davidson (1880), in Kaneohe Bay,Oahu, Hawaii,USA

The inarticulated brachiopod, Lingula reevii Davidson (1880) is a filter-feeding invertebrate that burrows vertically in sandy or mixed sediments. Its only recorded occurrence is from Kaneohe Bay, Oahu, Hawaii, southern Japan, and Ambon, Indonesia. Past surveys of Kaneohe Bay populations suggested a distinct decrease in abundance following the diversion of sewage effluent from the bay in 1978/1979. In the summer of 2004 and 2007, visual surveys were conducted in areas of historical L. reevii abundance as well as in areas appearing to have suitable habitat. In 2004, approximately 2,950 m² at 20 sites within the bay were surveyed using quantitative belt transecting methods. A maximum density of 4 Lingula/m² was observed, a decrease from previous maximum estimates of 500 individuals/m² (Worcester, Dissertation, Zoology Department, University of Hawai′i, pp 49, 1969) and 100 individuals/m² (Emig, J Exp Mar Biol Ecol 52:47–61, 1981). When these 20 sites were revisited in 2007, many had fewer or no L. reevii; therefore, broader scale presence/absence surveys were conducted at 16 additional sites in the bay (also surveyed in 2004). The highest density of L. reevii found in 2007 was 0.94 individuals/m². The continued decline in abundance of L. reevii in Kaneohe Bay may be due, in addition to decreased organic enrichment from diversion of sewage discharge almost 30 years ago, to the more recent reduction of suitable habitat by the invasion of mat-forming alien algae species.     

Long-term monitoring and modeling of polychlorinated dibenzo-p-dioxins and dibenzofurans from municipal solid waste incinerators and surrounding area in northern Taiwan

Municipal solid waste incinerators (MSWIs) have long been the major contributors of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) to ambient air in Taiwan. After stringent MSWI emission standards were introduced in 2001, the long-term continuous monitoring of flue gas and ambient air quality became necessary to ensure the effectiveness of the related control strategies. Three MSWIs and the surrounding ambient air were investigated in the current study for PCDD/F characteristics during 2006 to 2011. The average concentrations in the flue gas ranged from 0.008?~?0.0488 ng I-TEQ/Nm³, which is much less than the emission standard in Taiwan (0.1 ng I-TEQ/Nm³) (I-TEQ is the abbreviation of International Toxic Equivalent). This led to extremely low levels in the ambient air, 0.0255 pg I-TEQ/Nm³, much less than the levels seen in most urban areas around the world. Additionally, the results obtained using the Industrial Source Complex Short-Term Dispersion Model (ISCST3) indicate that the PCDD/F contributions from the three MSWIs to the ambient air were only in the range from 0.164?~?0.723 %. Principal component analysis (PCA) showed that the PCDD/Fs in the air samples had very similar characteristics to those from mobile sources. The results thus show that stringent regulations have been an effective control strategy, especially for urban areas, such as Taipei City.     

Impact of climate change and seasonal trends on the fate of Arctic oil spills

We investigated the effects of a warmer climate, and seasonal trends, on the fate of oil spilled in the Arctic. Three well blowout scenarios, two shipping accidents and a pipeline rupture were considered. We used ensembles of numerical simulations, using the OSCAR oil spill model, with environmental data for the periods 2009–2012 and 2050–2053 (representing a warmer future) as inputs to the model. Future atmospheric forcing was based on the IPCC’s A1B scenario, with the ocean data generated by the hydrodynamic model SINMOD. We found differences in “typical” outcome of a spill in a warmer future compared to the present, mainly due to a longer season of open water. We have demonstrated that ice cover is extremely important for predicting the fate of an Arctic oil spill, and find that oil spills in a warming climate will in some cases result in greater areal coverage and shoreline exposure.     

Integration of novel hybrid composite discharge electrode with semi-pilot novel cross-flow electrostatic precipitator

ABSTRACT

Wet electrostatic precipitators (WESPs) are modern-era pollution control systems specifically designed to capture ultrafine particles as well as acid mist, highly resistive and sticky particles; however, this requires the use of expensive corrosion-resistant metal alloys. The work presented here is part of a continuing study at Ohio University aimed at reducing the cost of WESPs by using a novel combination of a polymer collector surfaces with a hybrid composite discharge electrode. In this study, a hybrid composite discharge electrode was tested, for the first time, inside a semi-pilot-scale experimental setup, with collection surfaces consists of a vertical array of strands. Particle laden gases were passed through this array of polymer ropes, which were kept wet by a small flow of water. The discharge electrodes were composite laminates of carbon fibers in a polymer matrix enclosing a metal mesh. The preliminary results showed that this new integrated system of composite discharge electrode and polymer collector surfaces can match or exceed the performance of a conventional metal alloy electrostatic precipitator (ESP) with metal discharge electrodes. There are additional advantages due to the system being compact, lightweight, and highly corrosion resistant.

Implications: This study focused on integrating and assessing performance of a novel hybrid composite electrode (HCE) inside semi-pilot novel cross-flow electrostatic precipitator at conditions typically observed in coal-fired power plant exhausts. The results were collected for particulate collection efficiencies and were compared with a rigid metal electrode. The HCE outperformed metal electrode by showing higher particulate collection efficiency. This result showcases substantial potential for these two new technologies (HCE and cross-flow system) as a substitute for conventional metal based wet ESPs.     

The potential effect of differential ambient and deployment chamber temperatures on PRC derived sampling rates with polyurethane foam (PUF) passive air samplers

Performance reference compound (PRC) derived sampling rates were determined for polyurethane foam (PUF) passive air samplers in both sub-tropical and temperate locations across Australia. These estimates were on average a factor of 2.7 times higher in summer than winter. The known effects of wind speed and temperature on mass transfer coefficients could not account for this observation. Sampling rates are often derived using ambient temperatures, not the actual temperatures within deployment chambers. If deployment chamber temperatures are in fact higher than ambient temperatures, estimated sampler-air partition coefficients would be greater than actual partition coefficients resulting in an overestimation of PRC derived sampling rates. Sampling rates determined under measured ambient temperatures and estimated deployment chamber temperatures in summer ranged from 7.1 to 10 m³ day⁻¹ and 2.2-6.8 m³ day⁻¹ respectively. These results suggest that potential differences between ambient and deployment chamber temperatures should be considered when deriving PRC-based sampling rates.     

The Energy for Growing and Maintaining Cities

Herein we develop a means to differentiate between the energy required to expand and the energy required to maintain the economies of cities. A nonlinear model is tested against historical data for two cities, Hong Kong and Singapore. A robust fit is obtained for Hong Kong, with energy for maintenance close to that for growth, while Singapore, with a weaker fit, is growth dominated. The findings suggest that decreases in either of the per unit maintenance or growth demands can simultaneously cause gross domestic product (GDP) and total energy use to increase. Furthermore, increasing maintenance demands can significantly limit growth in energy demand and GDP. Thus, the low maintenance demands for Hong Kong, and especially Singapore, imply that, all other things being equal, GDP and energy use of these cities will continue to grow, though Singapore’s higher energy use for growth means it will require more energy than Hong Kong.     

Development and calibration of a passive sampler for N-nitrosodimethylamine (NDMA) in water

N-Nitrosamines such as N-nitrosodimethylamine (NDMA) are organic compounds of environmental concern in groundwater, wastewater and potable water due to their potent carcinogenicity in laboratory animal studies and probable human carcinogenicity. While passive sampling techniques have become a widely used tool for providing time-averaged estimates of trace pollutant concentration, for chemicals such as NDMA that have relatively high water solubility, the selection of a suitable sorbent is difficult. This work is a proof of principle study that investigated for the first time the use of coconut charcoal as a passive sampler sorbent. Apparent charcoal/water sorption coefficients for NDMA were >551 mL g⁻¹ at environmentally relevant aqueous concentrations of less than 1 μg L⁻¹. Under the experimental conditions employed, a sampling rate of 0.45 L d⁻¹ was determined and for an aqueous concentration of 1000 ng L⁻¹, it is predicted that the sampler remains in the linear uptake stage for approximately 4 d, while equilibrium attainment would require about 26 d. The presence of humic acid, used as a surrogate for DOC, enhanced NDMA sorption on the coconut charcoal.