An Assessment of the Significance of Mercury Release from Coal Fly Ash

Abstract

Some mercury (Hg) naturally present in coal is retained in the fly ash remaining after combustion. Concern has been raised regarding the potential for release of this Hg to the environment. The exchange of Hg between fly ash and the atmosphere was measured in the laboratory and in situ at a fly ash landfill. All samples of fly ash used in the laboratory study, with the exception of that derived from lignite-type coal, acted as a sink for atmospheric Hg. Deposition rates were found to increase as air Hg concentrations increased and to decrease with incident light and increased temperature. Addition of water to fly ash samples resulted in re-emission of deposited atmospheric Hg. Deposition was the dominant flux measured in situ at a fly ash landfill. Atmospheric Hg was deposited to all samples collected as part of two demonstration projects using carbon injection for enhanced Hg capture. Hg concentrations of extracts derived using U.S. Environmental Protection Agency Method 1312 (Synthetic Precipitation Leaching Procedure) were ≤14.4 ng/L. Data developed demonstrate that fly ash, including that collected from Hg removal projects, will release little Hg to the air or water, and under certain conditions, absorbs Hg from the air.     

Letters to The Editor

Abstract

Since 1990, basic knowledge of the “chemical climate” of fine particles, has greatly improved from Junge’s compilation from the 1960s. A worldwide baseline distribution of fine particle concentrations on a synoptic scale of approximately 1000 km can be estimated at least qualitatively from measurements. A geographical distribution of fine particle characteristics is deduced from a synthesis of a variety of disparate data collected at ground level on all continents, especially in the northern hemisphere. On the average, the regional mass concentrations range from 1 to 80 μg/m³, with the highest concentrations in regions of high population density and industrialization. Fine particles by mass on a continental and hemispheric spatial scale are generally dominated by non-sea salt sulfate (0.2 to ～20 μg/m³, or ～25%) and organic carbon (0.2->10 μg/m³, or ～25%), with lesser contributions of ammonium, nitrate, elemental carbon, and elements found in sea salt or soil dust. The crustal and trace metal elements contribute a varied amount to fine particle mass depending on location, with a larger contribution in marine conditions or during certain events such as dust storms or volcanic disturbances. The average distribution of mass concentration and major components depends on the proximity to areal aggregations of sources, most of which are continental in origin, with contributions from sea salt emissions in the marine environment. The highest concentrations generally are within or near very large population and industrial centers, especially in Asia, including parts of China and India, as well as North America and Europe. Natural sources of blowing dust, sea salt, and wildfires contribute to large, intermittent spatial-scale particle loadings beyond these ranges. A sampling of 10 megacities illustrates a range of characteristic particle composition, dependent on local and regional sources. Long-range transport of pollution from spatially aggregated sources over hundreds of kilometers creates persistent regional- and continental-scale gradients of mass concentration, sulfate, and carbon species especially in the northern hemisphere. Data are sparse in the southern hemisphere, especially beyond 45° S, but are generally very low in mass concentrations.     

HCI Sorption by Dry NaHCO3 for Incinerator Emissions Control

The sorption of hydrochloric acid (HCI) by thermally decomposed sodium bicarbonate (NaHCO₃) was investigated using a fixed-bed reactor containing sorbent particles dispersed in a bed of spherical glass beads. The gas flow rate (68° F and 760 mm Hg) was 0.039 cfm (1.1 liter/min) and the bed had a cross-sectional area of 0.0055 sq. ft. (5.1 sq. cm). The influence of particle diameter (10, 45 and 163 μm), temperature (225, 275, 375, 455, and 550° F), superficial gas velocity (11 and 21 fpm at reactor conditions, 375° F), and Inlet HCI gas concentration (415 ppm and 760 ppm in N₂, 275 and 455° F) were studied. Results showed that HCI sorption increased strongly with increasing temperature but was only weakly dependent on particle diameter, superficial gas velocity, and HCI gas concentration.     

The Potential of Pulse-Jet Baghouses for Utility Boilers. Part 2: Performance of Pulse-Jet Fabric Filter Pilot Plants

Pulse-jet fabric filters (PJFFs) are widely used in U.S. industrial boiler applications and in utility and industrial boilers abroad. Their small size and reduced cost relative to more conventional reverse-gas baghouses makes the use of PJFFs appear to be an attractive particulate control option for utility boilers. This paper (Part 2 of a three-part series) summarizes the results of pilot PJFF studies sponsored by the Electric Power Research Institute at different utility sites in the United States. The purpose of these tests is to evaluate PJFF performance for U.S. fossil-fuel-fired applications. These data are also used to corroborate the results of a recent worldwide survey of PJFF user experience, as described in Part 1 of this series. Part 3 will provide a cost comparison of PJFFs to other particulate control options such as electrostatic precipitators and reverse-gas baghouses.     

Stationary Source Surveillance for Large Air Quality Control Regions in Nonurban Areas

Increased energy processing activity in the north has resulted in a demand for measured data on plume dispersion that is relevant to this particular region. The north was, therefore, selected for study in a comprehensive government/Industry research program. The objective of these studies was to assess the behaviour of plumes in various geographic areas In Canada. The program utilizes airborne and automobile-mounted probes to determine SO₂ and temperature profiles within stock-emitted plumes as well as meteorological data on local atmospheric structure. The data are then analyzed numerically to obtain plume axis elevations and standard deviations of spread and these results are compared to accepted predictive methods. Good agreement with the analysis of Briggs was observed for predicting the location of the plume axis In neutral conditions; some deviations were noted in stable conditions. Values of the measured product ( σay-σ;z) were generally larger than those of Pasquill, particularly for those values close to the source. A difference between the measured values of (σ;y-σ;z) in fall and winter was observed in stable conditions.     

AIC model selection and multimodel inference in behavioral ecology: some background,observations, and comparisons

We briefly outline the information-theoretic (I-T) approaches to valid inference including a review of some simple methods for making formal inference from all the hypotheses in the model set (multimodel inference). The I-T approaches can replace the usual t tests and ANOVA tables that are so inferentially limited, but still commonly used. The I-T methods are easy to compute and understand and provide formal measures of the strength of evidence for both the null and alternative hypotheses, given the data. We give an example to highlight the importance of deriving alternative hypotheses and representing these as probability models. Fifteen technical issues are addressed to clarify various points that have appeared incorrectly in the recent literature. We offer several remarks regarding the future of empirical science and data analysis under an I-T framework.     

A Screening Test for the Determination of Ethylene Sensitivity

Ethephon, which releases ethylene within plant tissues after application, was chosen to perform assessments of the relative sensitivity of crops to ethylene and to determine which stages of plant development were most sensitive. The species chosen were: barley, wheat, oats, canola and field pea, all of which are important crops in the province of Alberta, Canada. Plants were treated with ethephon at one of 7 different stages. Plants were assessed for their vegetative and reproductive growth, including height, biomass, yield and seed quality. Visual symptoms were photographed and documented to compare them with symptoms caused by ethylene applied as a gas. It was concluded that in barley, wheat and canola the late vegetative and early reproductive stages were most sensitive, at least when sensitivity was defined as reductions in yield and quality. As for field pea, ethephon had no effect on yield but did cause increased numbers of pods, which in certain conditions could lead to increased yields. Significant effects on vegetative growth were only observed in the early vegetative stages of development but with no effects on yield. The screening protocol successfully identified sensitive cultivars and growth stages for further investigation of the effects of ethylene exposure.     

The effect of salinity on survival,bioenergetics and predation risk in the mud crabs <Emphasis Type="Italic">Panopeus simpsoni</Emphasis> and <Emphasis Type="Italic">Eurypanopeus depressus</Emphasis>

The effect of salinity on survival, bioenergetics and predation risk was studied in two common mud crabs in the Gulf of Mexico, Eurypanopeus depressus and Panopeus simpsoni. Eurypanopeus survived better at low salinities (the 28-day LC₅₀ of E. depressus was 0.19 PSU compared with 6.97 PSU for P. simpsoni). While low salinity increased energy expenditure and reduced food consumption and absorption, resulting in lower scope for growth, identical responses to salinity occurred in both species. Both species also had similar salinity-dependent patterns of hyper-osmoregulation. Because these physiological mechanisms could not explain differences between the two species in salinity tolerance, we explored the effect of salinity on competition for refugia. Eurypanopeus had higher resource holding potential for refugia, especially at low salinity. As a consequence it had lower predation risk to blue crabs in laboratory experiments. The higher tolerance by E. depressus for low salinities, and greater resource holding potential for refugia may explain why it has a more euryhaline distribution than P. simpsoni.     

Post-explosion observations of experimental mine and laboratory coal dust explosions

The Pittsburgh Research Laboratory (PRL) of the National Institute for Occupational Safety and Health (NIOSH) and the Mine Safety and Health Administration (MSHA) conducted joint research on dust explosions by studying post-explosion dust samples. The samples were collected after full-scale explosions at the PRL Lake Lynn Experimental Mine (LLEM), and after laboratory explosions in the PRL 20-L chamber and the Fike 1 m³ chamber. The dusts studied included both high- and low-volatile bituminous coals. Low temperature ashing for 24 h at 515 °C was used to measure the incombustible content of the dust before and after the explosions. The data showed that the post-explosion incombustible content was always as high as, or higher than the initial incombustible content. The MSHA alcohol coking test was used to determine the amount of coked dust in the post-explosion samples. The results showed that almost all coal dust that was suspended within the explosion flame produced significant amounts of coke. Measurements of floor dust concentrations after LLEM explosions were compared with the initial dust loadings to determine the transport distance of dust during an explosion. All these data will be useful in future forensic investigations of accidental dust explosions in coal mines, or elsewhere.