Effect of chelating agents and solubility of cadmium complexes on uptake from soil by Brassica juncea

Brassica juncea, or Indian mustard, was grown in soil artificially contaminated with either a soluble salt, CdCl(2), at 186mg Cdkg(-1), or alternately an insoluble, basic salt, CdCO(3), at 90mg Cdkg(-1). These experiments study the range of Cd uptake by Indian mustard from conditions of very high Cd concentration in a soluble form to the other extreme with an insoluble Cd salt. After plants were established, four different chelating agents were applied. Chelating agents increased plant uptake of Cd from the CdCl(2) soil but did not significantly increase plant uptake of Cd from the CdCO(3) contaminated soil. Addition of ethylenediaminetetraacetic acid (EDTA) increased the plant concentration of Cd by almost 10-fold in soils contaminated with CdCl(2), with a concentration of 1283mg Cdkg(-1) in the dried EDTA-treated plants over a concentration of 131mg Cdkg(-1) in plants without added chelate. However, EDTA increased the aqueous solubility of Cd by 36 times over the soil matrix without added chelator, and thereby, increased the possibility of leaching. Other chelators used in both experiments were ethylenebis(oxyethylenenitrilo)tetraacetic acid, trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid, and diethylenetriaminepentaacetic acid (DTPA) increasing Cd in plants to 1240, 962, and 437mg Cdkg(-1), respectively. The other chelating agents increased the solubility of Cd in the leachate but not to the extent of EDTA. Comparing all chelating agents studied, DTPA increased plant uptake in terms of Cd in dried plant concentration most relative to the solubility of complexed Cd in runoff water.     

Contaminant exposure in terrestrial vertebrates

Here we review mechanisms and factors influencing contaminant exposure among terrestrial vertebrate wildlife. There exists a complex mixture of biotic and abiotic factors that dictate potential for contaminant exposure among terrestrial and semi-terrestrial vertebrates. Chemical fate and transport in the environment determine contaminant bioaccessibility. Species-specific natural history characteristics and behavioral traits then play significant roles in the likelihood that exposure pathways, from source to receptor, are complete. Detailed knowledge of natural history traits of receptors considered in conjunction with the knowledge of contaminant behavior and distribution on a site are critical when assessing and quantifying exposure. We review limitations in our understanding of elements of exposure and the unique aspects of exposure associated with terrestrial and semi-terrestrial taxa. We provide insight on taxa-specific traits that contribute, or limit exposure to, transport phenomenon that influence exposure throughout terrestrial systems, novel contaminants, bioavailability, exposure data analysis, and uncertainty associated with exposure in wildlife risk assessments. Lastly, we identify areas related to exposure among terrestrial and semi-terrestrial organisms that warrant additional research.     

Environmental evaluation for workplace violence in healthcare and social services

PROBLEM: Federal policy recommends environmental strategies as part of a comprehensive workplace violence program in healthcare and social services. The purpose of this project was to contribute specific, evidence-based guidance to the healthcare and social services employer communities regarding the use of environmental design to prevent violence. METHOD: A retrospective record review was conducted of environmental evaluations that were performed by an architect in two Participatory Action Research (PAR) projects for workplace violence prevention in 2000 and, in the second project in 2005. Ten facility environmental evaluation reports along with staff focus group reports from these facilities were analyzed to categorize environmental risk factors for Type II workplace violence. RESULTS: Findings were grouped according to their impact on access control, the ability to observe patients (natural surveillance), patient and worker safety (territoriality), and activity support. DISCUSSION: The environmental assessment findings reveal design and security issues that, if corrected, would improve safety and security of staff, patients, and visitors and reduce fear and unpredictability. IMPACT ON INDUSTRY: Healthcare and social assistance employers can improve the effectiveness of violence prevention efforts by including an environmental assessment with complementary hazard controls.     

Estimating the aquatic emissions and fate of perfluorooctane sulfonate (PFOS) into the river Rhine

The sources, distribution, levels and sinks of perfluorooctane sulfonate (PFOS) estimated to be released from areas of high population density, have been explored using the river Rhine as a case study. A comparison between modelled and measured data is presented, along with analysis of the importance of PFOS sorption in riverine systems. PFOS releases into the Rhine were estimated to be 325-690 kg/yr based on per capita emission rates of 27-57 μg day(-1) from a population of 33 million living within a 50 km zone either side of the river. Sorption of PFOS to suspended particles and sediments may alter its fate in the aquatic environment. Therefore available measured and modelled partitioning data was assessed, and K(d) values (sorption coefficient) of 7.5 and 20 were selected. This resulted in sediment-water ratios of 23-76 : 1, which are similar to ratios reported in the literature, and resulted in modelled estimates that <20% of the total PFOS entering the Rhine binds to sediments or suspended particles. The calculated discharge from the Rhine to the North Sea based on measured data was 420-2200 kg/yr; our model predictions are in good agreement with these estimates. Emission trends were accurately predicted, suggesting population density can be effectively used as a surrogate for diffuse PFOS emissions from product use, while predicted concentrations were a factor of 2-4 below measured data showing the importance of other sources. Transfer of PFOS to sediment is estimated to be minimal, and consequently discharges to the North Sea are roughly equal to PFOS releases to river water.     

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

Using variance components to estimate power in a hierarchically nested sampling design

We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007–2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey’s power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.     

Migration of acidic groundwater seepage from uranium-tailings impoundments, 2. Geochemical behavior of radionuclides in groundwater

In this second paper of a series on groundwater seepage from uranium tailings, the general geochemical behavior of radionuclides is described and then applied to data from the field site, Seepage Area A of the Nordic Main impoundment near Elliot Lake, Ontario. The delineation of radionuclide behavior requires (1) the calculation of total element concentration by the summation of concentrations of each element's isotopes (the isotopic concentrations are calculated from the isotopes' radioactivities), (2) the evaluation of solid-liquid interactions using total element concentrations, and (3), for particular isotopes, the evaluation of the extent to which parental geochemical behavior causes a deviation in the isotope's behavior from that of its total element. A computerized speciation program, WATRAD, is used to evaluate aqueous complexation and mineral saturation indices of radium, actinium, thorium, and uranium. Data from Seepage Area A on isotopes of these four elements plus ²¹⁰Pb show that the geochemical behavior of radionuclides can be best defined on an individual isotopic basis rather than on an elemental basis.     

Freshwater stress on small island developing states: population projections and aridity changes at 1.5 and 2 °C

Small island developing states (SIDS) face multiple threats from anthropogenic climate change, including potential changes in freshwater resource availability. Due to a mismatch in spatial scale between SIDS landforms and the horizontal resolution of global climate models (GCMs), SIDS are mostly unaccounted for in GCMs that are used to make future projections of global climate change and its regional impacts. Specific approaches are required to address this gap between broad-scale model projections and regional, policy-relevant outcomes. Here, we apply a recently developed methodology that circumvents the GCM limitation of coarse resolution in order to project future changes in aridity on small islands. These climate projections are combined with independent population projections associated with shared socioeconomic pathways (SSPs) to evaluate overall changes in freshwater stress in SIDS at warming levels of 1.5 and 2 °C above pre-industrial levels. While we find that future population growth will dominate changes in projected freshwater stress especially toward the end of the century, projected changes in aridity are found to compound freshwater stress for the vast majority of SIDS. For several SIDS, particularly across the Caribbean region, a substantial fraction (~?25%) of the large overall freshwater stress projected under 2 °C at 2030 can be avoided by limiting global warming to 1.5 °C. Our findings add to a growing body of literature on the difference in climate impacts between 1.5 and 2 °C and underscore the need for regionally specific analysis.     

Estimating willingness to pay for a threatened species within a threatened ecosystem

This study conducts a choice experiment to determine the willingness to pay for Palouse Prairie conservation. The giant Palouse earthworm (Driloleirus americanus), a rare species endemic to the Palouse region, is included as an attribute of conservation and serves as a method for determining the willingness to pay for protecting the species. This method evaluates the value of the earthworm as an attribute of an overall willingness to pay for threatened ecosystem preservation rather than a direct willingness to pay for protecting the species. This method is expected to yield a more accurate measure of willingness to pay for rare species. The annual willingness to pay per household for the giant Palouse earthworm is $20.45 based on the conditional logit model and $19.30 based on the mixed logit model. Ranking and relative importance are included as methods for representing a non-monetary value and importance of the giant Palouse earthworm.