Experimental investigations on a forced convection solar air heater using packed bed absorber plates with phase change materials

In this work, the performance of a forced convection solar air heater was evaluated using using three packed bed absorber plate configurations and compared with flat absorber plate. The phase change material (paraffin wax) was packed in the pin-fin, trianglular and circular absorber plate configurations. The performance parameters such as, outlet air temperature, thermo-hydraulic efficiency, exergy efficiency and pressure drop were predicted and compared. The results showed that the packed bed absorber plate configurations using paraffin wax have higher outler air temperature in the range of 2–5°C with 3–40% higher thermo-hydraulic efficiency and 2–20% higher exergy efficiency when compared to flat absorber plate. However, the packed bed absorver plates have higher pressure drop when compared to flat absorber plate.     

Experimental investigations on direct injection diesel engines using grape seed oil methyl ester with different bowl geometries

In this paper, the performance of direct injection diesel engine was experimentally investigated under the influence of two different pistons’s geometry deep bowl combustion chamber (DBCC) and toroidal combustion chamber (TCC) compared with standard piston combustion chamber (SPCC) geometry. The experiments were carried out standard atmospheric conditions of 1.01325 bar and 30 ± 2 °C. The piston bowl was designed and developed without modifying the compression ratio of the engine. The investigations were carried out with B25 (25% GOME + 75% diesel), B50 (50% GOME + 50% diesel), B75 (75% GOME +25% diesel) and B100 (100% GOME) by volume blends for three different bowl geometries. The thermogravimetric analysis (TGA) was given the importance of higher in-cylinder temperature for the mass change of GOME leads to a more premixed phase of combustion. The results showed that DBCC has better combustion characteristics when compared with SPCC and TCC for all the blends. The B25 and B50 blends showed good combustion characteristics with DBCC and SPCC individually. While TCC showed average engine characteristics for all the blends categorically, the brake thermal efficiency for B25 blend confirmed a 4.7% higher than SPCC-diesel with DBCC piston, and the smoke, CO (Carbon monoxide), and HC (Hydrocarbon) are reduced by 9.2%, 30.7%, and 4.6%, respectively. Thus, the B25 blend in a DBCC piston engine was observed to be the distinction than other configurations. The results confirmed that the DBCC is a good option for B25 blend.     

Comparative investigation of coal- and oil-fired boilers based on emission factors, ozone and secondary organic aerosol formation potentials of VOCs

Volatile organic compounds(VOCs) are the important precursors of the tropospheric ozone(O_3) and secondary organic aerosols(SOA),both of which are known to harm human health and disrupt the earth's climate system.In this study,VOC emission factors,O_3 and SOA formation potentials were estimated for two types of industrial boilers:coal-fired boilers(n=3) and oil-fired boilers(n=3).Results showed that EVOCs concentrations were more than nine times higher for oil-fire d boilers compared to those for coal-fired boilers.Emission factors of ΣVOCs were found to be higher for oil-fired boilers(9.26-32.83 mg-VOC/kg) than for coal-fired boilers(1.57-4.13 mg-VOC/kg).Alkanes and aromatics were obtained as the most abundant groups in coal-fired boilers,while oxygenated organics and aromatics were the most contributing groups in oil-fired boilers.Benzene,n-hexane and o-ethyl toluene were the abundant VOC species in coal-fired boiler emissions,whereas toluene was the most abundant VOC species emitted from oil-fired boilers.O_3 and SOA formation potentials were found 12 and 18 times,respectively,higher for oil-fired than for coal-fired boilers.Total OFP ranged from 3.99 to 11.39 mg-O_3/kg for coal-fired boilers.For oil-fired boilers,total OFP ranged from 36.16 to 131.93 mg-O_3/kg.Moreover,total secondary organic aerosol potential(SOAP) ranged from 65.4 to 122.5 mg-SOA/kg and 779.9 to 2252.5 mg-SOA/kg for the coal-fired and oil-fired boilers,respectively.     

Observations on the embryonic development and energy source in the crab Xantho bidentatus

During development of Xantho bidentatus, ten stages of the eggs have been recognised. In this period the colour of the egg changes from black to pale white at the X stage of development. Total carbohydrate, glycogen, soluble protein, insoluble protein, total lipid, ash and water content have been determined in all ten stages of developing eggs. The utilisation of these compounds at various stages of development is discussed. The habitat of the crabs and its significance during development is also discussed. A constant decrease in the organic material as well as the dry weight of the egg was noticed with increased stage of development. Along with this a steady increase in the water and ash content was also observed. Glycogen was reduced during early days of development, whereas lipid was reduced during the latter stages of development. Both soluble and insoluble proteins exhibit conspicuous variations depending upon the stage of development.     

Effect of heavy metals (Hg and Zn) on the growth and phosphate solubilising activity in halophilic phosphobacteria isolated from Manakudi mangrove

The diversity of phosphobacteria in Manakudi mangrove ecosystem of Tamil Nadu was carried out in root and rhizosphere soil samples. The counts of phosphobacteria were found higher in root samples than in soil samples particularly in Hymenachene acutigluma. The abundance of phosphobacterial diversity in Manakudi mangrove showed high degree of positive correlation with the content of phosphate in rhizosphere soil of all the mangrove and associated plant species. Nine phosphobacterial species belonging to 7 genera were reported from Manakudi mangrove ecosystem. All the identified bacterial species are sensitive to both the heavy metals (mercury and zinc) in terms of growth and physiology even at lower concentrations. The content of protein and total sugars were increased by the higher concentrations of heavy metals whereas decreased trend was noticed in lower concentrations of heavy metals.     

Pesticide Residues in Water From River Kaveri,South India

The residue levels of presistent chlorinated pesticides such as HCH (hexachlorocyclo-hexane) isomers and DDT (dichlorodiphenyl trichloroethane) compounds were quantified in water samples collected from the River Kaveri and its distributor River Coleroon in Tamil Nadu, South India. HCH showed higher levels in River Kaveri during premonsoon (July to September) and monsoon (October to December) months, reflecting the HCH usage during that season for paddy crops. But in the case of DDT no clear trend in residue level was observed. the α-HCH was detected as the dominant isomer in all the three sampling sites. Among DDT compounds, p,p'-DDT and p,p'-DDE showed higher percentage of the total. International comparison of residue levels revealed that the present values are comparable to the waters from Asian and South East Asian nations, but lower than some samples from other parts of India. the value of DDT is well below the EEC's maximum acceptable concentration for surface waters and lower than the recommended limit of 2000ng 1^-1 in USA water for protection of aquatic life (Water Quality Criteria, 1972).     

Effect of nickel exposure on serum amylase activity in nickel-plating workers

The objective of this study was to determine the effect of nickel (Ni) exposure on serum amylase activity in nickel-plating workers in Bangalore (India). Sixty-nine subjects using Ni during the electroplating process formed the exposed group. An equal number of age- and sex-matched subjects working in the administration section formed the control group. Urine Ni levels were determined using a flameless atomic absorption spectrophotometer. Serum amylase activity was determined using spectrophotometric method with 2-chloro-4-nitrophenyl-α-D-maltotrioside as substrate. A significant increase in urine Ni and serum amylase activity was noted in nickel platers as compared with the control group. The level of serum amylase activity was positively and significantly associated with Ni content in urine of nickel platers. Stepwise multiple regression analysis was used to assess the effects of Ni exposure, life style confounding factors and presence of gastrointestinal problems on serum amylase activity. The analysis showed that the subjects who had urine Ni levels beyond 10?µg?g^?1 of creatinine, nickel platers category, smoking and body mass index variables were significantly associated with serum amylase activity. The results of this study suggest that the increased serum amylase activity observed in nickel-exposed subjects could be used as a biomarker for investigating pancreatic function in Ni exposure.     

Immobilisation of manganese,cobalt and nickel by deep-sea-sediment microbial communities

Box core samples BC26 and BC36 from geologically different settings were examined to test the hypothesis that autochthonous microbial communities from polymetallic-nodule-rich Central Indian Basin sediments actively participate in immobilising metal ions. The bottom water dissolved oxygen concentration was reported to be 4.2–4.3 mL·L^?1 in the northern siliceous ooze (BC26) and 4.1–4.2 mL·L^?1 in the southern pelagic red clay (BC36); the sedimentation rates for these regions were 0.834 and 0.041 cm·kyr^?1, respectively. An onboard experiment, conducted under oxic and sub-oxic conditions with 100 μmol of Mn, Co and Ni, showed that microbial immobilisation under sub-oxic conditions was higher than in azide-treated controls in BC26 for Mn, Co and Ni at 30, 2 and 4 cm below sea floor (bsf), respectively, after 45 days. The trend in immobilisation was BC 26>BC 36, Co>Mn>Ni under oxic conditions and Mn>Co>Ni under sub-oxic conditions. The depth of maximum immobilisation for Co in BC26 under sub-oxic conditions coincided with the yield of cultured Co-tolerant bacteria and Ni only with organic carbon at 4 cm bsf. This study demonstrates that the organic carbon content and bioavailable metal concentrations in sediments regulate microbial participation in metal immobilisation.     

“Glandular pockets” of the integument and feeding mechanism inPagurus bernhardus (Crustacea: Anomura)

The benthic anomuran crabPagurus bernhardus (L) were collected from the North Sea near Helgoland, West Germany, during the years 1986–1987. The histological study of the integument ofPagurus bernhardus reveals a double structure with dorsal and ventral cuticular layers and with two epithelial cell layers. Additional structures have been developed within the integument to trap micro food organisms. The structure and function of the cupshaped glandular pockets of the integument is described. The cells which secrete mucus are also described. Histological and histochemical methods have been employed to study the chemical nature of various cells of the integument and the secretions of the glandular pockets. The ecological significance of the sensory hairs, glandular pockets, cuticular layers and the supra-branchial groove is discussed with reference to the crab's feeding mechanism.