Metal accumulation from contaminated food and its effect on growth of juvenile landsnails Helix engaddensis

Metal accumulation by juvenile landsnails, Helix engaddensis, and its effect on growth rate was studied over a 5-week period of exposure and 2 weeks of recovery. An artificial food contaminated with Cu (4-2500 microg x g(-1)), Cd (50-800 microg x g(-1)), Pb, and Zn (20-12500 microg x g(-1)) was used. During the 7 weeks of the experiment, mortality rates were 20, 27, 30, and 38% among snails fed Cu-, Pb-, Zn-, and Cd-contaminated food, respectively. According to the ability to inhibit growth, metals were found to have the following order: Cd > Zn > Cu = Pb. Inhibitory effects of dietary metals started to be significant from the third week of exposure on. Inhibition of growth by Pb and Cu was found to be reversible, and within the first week of recovery, snails erupted their aestivation and resumed feeding and growth to gain weights similar to those of the control groups. Snails fed Cd- or Zn-contaminated food failed to resume growth during the 2 weeks of recovery. This indicates that in the case of Cu and Pb, growth inhibition was mainly due to starvation due to food rejection and aestivation. On the other hand, growth inhibition caused by Cd and Zn may have been resulting from irreversible toxicity. Therefore, snails were assumed to be sensitive to Cd and Zn but tolerant to Cu and Pb. Accumulation of Cu and Pb was significant only at the highest concentrations. At low and medium concentrations, no signs of accumulation were observed, indicating regulation at these concentrations. Cd and Zn accumulation starts at low concentrations but became significant at medium and high levels indicating accumulation of these metals.     

Bivariate cointegration between poverty and environment: a case study of Pakistan (1980–2009)

The objective of this paper is to empirically investigate a two-way statistical relationship between the agriculture environment and rural poverty. To recognise the relationship between the two variables, a time series, co-integration and Granger causality tests have been employed. Secondary data pertaining to Pakistan from 1980–2009 on rural poverty and environmental factors (such as commercial energy consumption, water availability and total cropped area) have been used for the analysis. The empirical results only moderately support the conventional view that rural poverty has a significant long-term casual effect on environmental proxies in Pakistan. The present study finds evidence of uni-directional causality between poverty and the environment in the context of the agriculture sector in Pakistan.     

Does energy consumption contribute to environmental pollutants? evidence from SAARC countries

The objective of the study is to examine the causal relationship between energy consumption and environmental pollutants in selected South Asian Association for Regional Cooperation (SAARC) countries, namely, Bangladesh, India, Nepal, Pakistan, and Srilanka, over the period of 1975–2011. The results indicate that energy consumption acts as an important driver to increase environmental pollutants in SAARC countries. Granger causality runs from energy consumption to environmental pollutants, but not vice versa, except carbon dioxide (CO₂) emissions in Nepal where there exists a bidirectional causality between CO₂ and energy consumption. Methane emissions in Bangladesh, Pakistan, and Srilanka and extreme temperature in India and Srilanka do not Granger cause energy consumption via both routes, which holds neutrality hypothesis. Variance decomposition analysis shows that among all the environmental indicators, CO₂ in Bangladesh and Nepal exerts the largest contribution to changes in electric power consumption. Average precipitation in India, methane emissions in Pakistan, and extreme temperature in Srilanka exert the largest contribution.     

Metal uptake capability of <Emphasis Type="Italic">Cyperus articulatus</Emphasis> L. and its role in mitigating heavy metals from contaminated wetlands

Wetland plants are biological filters that play an important role in maintaining aquatic ecosystem and can take up toxic metals from sediments and water. The present study investigated the seasonal variation in the accumulation potential of heavy metals by Cyperus articulatus in contaminated watercourses. Forty quadrats, distributed equally in 8 sites (six contaminated sites along Ismailia canal and two uncontaminated sites along the River Nile), were selected seasonally for sediment, water, and plant investigations. Autumn was the flourishing season of C. articulatus with the highest shoot density, length, and diameter as well as aboveground biomass, while summer showed the least growth performance. The photosynthetic pigments were markedly reduced under contamination stress. C. articulatus plants accumulated concentrations of most heavy metals, except Pb, in their roots higher than the shoots. The plant tissues accumulated the highest concentrations of Fe, Cd, Ni, and Zn during autumn, while Cu and Mn during spring, and Cr and Co during winter. It was found that Cd, Cu, Ni, Zn, Pb, and Co had seasonal bioaccumulation factor (BF) > 1 with the highest BF for Cd, Ni, and Zn during autumn, Co, Cu, and Pb in winter, spring, and summer, respectively. The translocation factor of most heavy metals, except Pb in spring, was <1 indicating potential phytostabilization of these metals. In conclusion, autumn is an ideal season for harvesting C. articulatus in order to monitor pollution in contaminated wetlands.     

Design and Characterization of PVA–Methacrylic Acid Based Smart Polymeric System for Controlled Release of Metoprolol

In the present work covalently crosslinked smart polymeric system of hydrogel based on poly vinyl alcohol (PVA) and methacrylic acid (MA) was designed by free radical polymerization with different compositions using glyoxal (40 % water solution) as crosslinker. It was observed that swelling of hydrogel had a pronounced enhancing effect on increasing the concentration of MA due to availability of more ionized carboxylic groups of MA but produced an opposite effect on increasing the concentration of glyoxal owing to less porous structure. As far as PVA is concerned, swelling did not show significant effect on increasing the concentration of PVA. Hydrophilic polymer PVA rich in hydroxyl group pertained to be highly interactive with water. It was examined that the release of metoprolol tartrate decreased with increased concentration of glyoxal, but increased with increase in concentration of MA. PVA/MA hydrogel was characterized by Fourier transform infrared spectroscopy and X-ray diffraction to study the structure and crystallinity of hydrogel respectively. Morphology was studied through scanning electron microscopy. Furthermore differential scanning calorimetry and thermogravimetric analysis were also performed to characterize thermal stability. It may be concluded that the mechanism of drug release was mainly non-Fickian diffusion.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

Positive environmental effects of the coronavirus 2020 episode: a review

Environment, Development and Sustainability - The outbreak of COVID-19 has made a global catastrophic situation that caused 1,039,406 deaths out of 35,347,404 infections, and it will also cause...     

Internalisation of externalities: Who bears the cost of pollution control?

Summary The impact of environmental regulations on the welfare of Malaysian palm oil growers, producers, and refiners are evaluated in an open-economy model. The estimated incremental effects of effluent standards and changes have been specifically rather small, with the exception of those upon the growers, but the cumulative effects have been considerable.Dr Khalid Abdul Rahim is a member of staff in the Department of Natural Resource Economics at the Universiti Pertanian Malaysia. This article is based on part of the work undertaken for his PhD dissertation at the University of Illinois, USA.     

A critical review of state-of-the-art electrocoagulation technique applied to COD-rich industrial wastewaters

Environmental Science and Pollution Research - Electrocoagulation (EC) is one of the emerging technologies in groundwater and wastewater treatment as it combines the benefits of coagulation,...