Integrated assessment of brick kiln emission impacts on air quality

This paper presents monitoring results of daily brick kiln stack emission and the derived emission factors. Emission of individual air pollutant varied significantly during a firing batch (7 days) and between kilns. Average emission factors per 1,000 bricks were 6.35–12.3 kg of CO, 0.52–5.9 kg of SO₂ and 0.64–1.4 kg of particulate matter (PM). PM emission size distribution in the stack plume was determined using a modified cascade impactor. Obtained emission factors and PM size distribution data were used in simulation study using the Industrial Source Complex Short-Term (ISCST3) dispersion model. The model performance was successfully evaluated for the local conditions using the simultaneous ambient monitoring data in 2006 and 2007. SO₂ was the most critical pollutant, exceeding the hourly National Ambient Air Quality Standards over 63 km² out of the 100-km² modelled domain in the base case. Impacts of different emission scenarios on the ambient air quality (SO₂, PM, CO, PM dry deposition flux) were assessed.     

Characterization and prediction of meandering channel migration in the GIS environment: A case study of the Sabine River in the USA

This study focused on the prediction of a 22 km meandering channel migration of the Sabine River between the states of Texas and Louisiana. The meander characteristics of 12 bends, identified from seven orthophotos taken between 1974 and 2004, were acquired in a GIS environment. Based on that earlier years' data acquisition, channel prediction was performed for the two years 1996 and 2004 using least squares estimation and linear extrapolations, yielding a satisfactory agreement with the observations (the median predicted and observed migration rates were 3.1 and 3.6 [m/year], respectively). The best-predicted migration rate was found to be associated with the longest orthophoto-recorded interval. The study confirmed that channel migration is strongly correlated with bend curvature and that the maximum migration rate of the bend corresponded to a radius of curvature [bend radius (R(C))/channel width (W(C))] of 2.5. In tight bends of a smaller radius of curvature than 1.6, secondary flow scouring near the bend apex increases bend curvature. The stability index of the dimensionless bend radius was determined to be 2.45. Overall, this study proves the effectiveness of least squares estimation with historical orthophotography for characterization of meandering channel migration.     

Indirect prediction of surface ozone concentration by plant growth responses in East Asia using mini-open top chambers

We developed small and mobile open top chambers (mini-OTC) measuring 0.6 m (W)?×?0.6 m (D)?×?1.2 m (H) with an air duct of 0.6 m (W)?×?0.23 m (D)?×?1.2 m (H). The air duct can be filled with activated charcoal to blow charcoal filtered air (CF) into the chamber, as opposed to non-filtered ambient air (NF). Ozone sensitive radish Raphanus sativus cv. Red Chime and rosette pakchoi Brassica campestris var. rosularis cv. ATU171 were exposed to NF and CF in mini-OTCs at different locations in East Asia. A total of 29 exposure experiments were conducted at nine locations, Shanghai, China, Ha Noi, Vietnam, Lampang, Phitsanulok and Pathumtani, Thailand, and Hiratsuka, Kisai, Abiko and Akagi, Japan. Although no significant relationships between the mean concentrations of ambient O₃ during the experimental period and the growth responses were observed for either species, multiple linear regression analysis suggested a good relationship between the biomass responses in each species and the O₃ concentration, temperature, and relative humidity. The cumulative daily mean O₃ (ppb/day) could be indirectly predicted by NF/CF based on the dry weight ratio of biomass, mean air temperature, and relative air humidity.     

Multicomponent photocatalysts for synergic removal of antibiotics in aqueous media: a review

Environmental Chemistry Letters - Pollution of waste and natural waters by antibiotics is a major health issue that induces the development of resistant pathogens. Pollutant may be removed by...     

Greenhouse gas savings potential of sugar cane bio-energy systems

One of the major justifications for bio-energy systems is their low greenhouse gas (GHG) emissions compared to fossil-energy ones. Transforming a sugar mill into a bio-energy plant would contribute to climate change mitigation via the extraction of renewable electricity and ethanol. This study takes the case of the sugar industry in Thailand and identifies scenario options that offer GHG reduction benefits. Improving efficiency in electricity generation from sugar cane residues e.g. excess bagasse and cane trash is such a beneficial option. Furthermore, extracting ethanol in a so-called bio-refinery, where the co-product stillage is utilized for energy, tends to magnify the potential benefit. The largest savings potential achieved with extracting ethanol from surplus sugar versus current practice in the sugar industry in Thailand amounts to 14 million tonnes CO₂e a year. This cannot be realized in practice until the carbon debt from land conversion is repaid, which takes 4.5–7 years, assuming that the land converted is grassland.     

Odd-numbered perfluorocarboxylates predominate over perfluorooctanoic acid in serum samples from Japan, Korea and Vietnam

Perfluorooctanoic acid (PFOA) has recently attracted attention as a potential health risk following environmental contamination. However, information detailing exposure to perfluorinated carboxylic acids (PFCAs) other than PFOA is limited. We measured the concentrations of PFCAs (from perfluorohexanoic acid to perfluorotetradecanoic acid) in serum samples obtained from patients in Japan (Sendai, Takayama, Kyoto and Osaka) between 2002 and 2009, Korea (Busan and Seoul) between 1994 and 2008 and Vietnam (Hanoi) in 2007/2008. Total PFCA levels (geometric mean) were increased from 8.9 ng mL(-1) to 10.3 ng mL(-1) in Japan; from 7.0 ng mL(-1) to 9.2 ng mL(-1) in Korea; and were estimated at 4.7 ng mL(-1) in Vietnam. PFCAs of greater length than PFOA were significantly increased in Sendai, Takayama and Kyoto, Japan, and levels of long-chain PFCAs exceeded PFOA levels in serum. Among these PFCAs, perfluoroundecanoic acid (PFUnDA) was the predominant component (28.5%), followed by perfluorononanoic acid (PFNA 17.5%), perfluorodecanoic acid (PFDA 7.9%), perfluorotridecanoic acid (PFTrDA 6.1%) and perfluorododecanoic acid (PFDoDA 1.8%). Odd-numbered PFCAs (PFNA, PFUnDA and PFTrDA) were also observed in Korea and Vietnam and their presence increased significantly in Korea between 1994 and 2007/2008. The proportion of long-chain PFCAs in serum was relatively high compared to reports in Western countries. Further investigations into the sources and exposure routes are needed to predict the future trajectory of these serum PFCA levels.     

Adaptive urban governance: new challenges for the second generation of urban adaptation strategies to climate change

The task of adapting cities to the impacts of climate change is of great importance—urban areas are hotspots of high risk given their concentrations of population and infrastructure; their key roles for larger economic, political and social processes; and their inherent instabilities and vulnerabilities. Yet, the discourse on urban climate change adaptation has only recently gained momentum in the political and scientific arena. This paper reviews the recent climate change adaptation strategies of nine selected cities and analyzes them in terms of overall vision and goals, baseline information used, direct and indirect impacts, proposed structural and non-structural measures, and involvement of formal and informal actors. Against this background, adaptation strategies and challenges in two Vietnamese cities are analyzed in detail, namely Ho Chi Minh City and Can Tho. The paper thereby combines a review of formalized city-scale adaptation strategies with an empirical analysis of actual adaptation measures and constraints at household level. By means of this interlinked and comparative analysis approach, the paper explores the achievements, as well as the shortcomings, in current adaptation approaches, and generates core issues and key questions for future initiatives in the four sub-categories of: (1) knowledge, perspectives, uncertainties and key threats; (2) characteristics of concrete adaptation measures and processes; (3) interactions and conflicts between different strategies and measures; (4) limits of adaptation and tipping points. In conclusion, the paper calls for new forms of adaptive urban governance that go beyond the conventional notions of urban (adaptation) planning. The proposed concept underlines the need for a paradigm shift to move from the dominant focus on the adjustment of physical structures towards the improvement of planning tools and governance processes and structures themselves. It addresses in particular the necessity to link different temporal and spatial scales in adaptation strategies, to acknowledge and to mediate between different types of knowledge (expert and local knowledge), and to achieve improved integration of different types of measures, tools and norm systems (in particular between formal and informal approaches).     

Development of an algorithm for an EEG-based driver fatigue countermeasure

PROBLEM: Fatigue affects a driver's ability to proceed safely. Driver-related fatigue and/or sleepiness are a significant cause of traffic accidents, which makes this an area of great socioeconomic concern. Monitoring physiological signals while driving provides the possibility of detecting and warning of fatigue. The aim of this paper is to describe an EEG-based fatigue countermeasure algorithm and to report its reliability. METHOD: Changes in all major EEG bands during fatigue were used to develop the algorithm for detecting different levels of fatigue. RESULTS: The software was shown to be capable of detecting fatigue accurately in 10 subjects tested. The percentage of time the subjects were detected to be in a fatigue state was significantly different than the alert phase (P<.01). DISCUSSION: This is the first countermeasure software described that has shown to detect fatigue based on EEG changes in all frequency bands. Field research is required to evaluate the fatigue software in order to produce a robust and reliable fatigue countermeasure system. IMPACT ON INDUSTRY: The development of the fatigue countermeasure algorithm forms the basis of a future fatigue countermeasure device. Implementation of electronic devices for fatigue detection is crucial for reducing fatigue-related road accidents and their associated costs.     

Environmental regulatory failure and metal contamination at the Giap Lai pyrite mine, Northern Vietnam

The causes for the failure in enforcement of environmental regulations at the Giap Lai pyrite mine in northern Vietnam are considered and the environmental impacts that are associated with this mine are evaluated. It is shown that sulphide-rich tailings and waste rock in the mining area represent significant sources of acid rock drainage (ARD). The ARD is causing elevated metal levels in downstream water bodies, which in turn, represent a threat to both human health and to aquatic ecosystems. Metal concentrations in impacted surface waters have increased after mine closure, suggesting that impacts are becoming progressively more serious. No post-closure, remediation measures have been applied at the mine, in spite of the existence of environmental legislation and both central and regional institutions charged with environmental supervision and control. The research presented here provides further emphasis for the recommendation that, while government institutions may need to be strengthened, and environmental regulations need to be in place, true on the ground improvement in environmental quality in Vietnam and in many other developing countries require an increased focus on promoting public awareness of industrial environmental issues.     

Optimization of esterification of fatty acid rubber seed oil for methyl ester synthesis in a plug flow reactor

To date, non-food vegetable oil has been considered as the primary source for biodiesel production. Rubber seed oil has high acid value (34 mgKOH/g) and can be used for biodiesel synthesis. The purpose of this study was to investigate esterification of fatty acid, which derived from rubber seed oil, in a plug flow reactor system at high temperature and low methanol consumption. Response surface methodology was applied for design experiment and optimization of esterification reaction. Temperature, methanol consumption, and sulfuric acid were chosen as variables to examine their influence in a conversion to methyl ester. At 140°C, at 5:1 methanol to fatty acid ratio (by mole), H₂SO₄ 1.5 (%v/w), and space time 20 min, the conversion to methyl ester attained 98.2%. Fourier transform infrared spectroscopy (FTIR) and gas chromatography-Mass spectrometry (GC-MS) were used for analysis and to confirm the formation of methyl ester. Methyl ester was characterized for biodiesel fuel properties in accordance to ASTM standard.