Influence of peatland and land cover distribution on fire regimes in insular Southeast Asia

Anthropogenic biomass burning in insular Southeast Asia facilitates conversion and degradation of ecosystems and emits high amounts of carbon into the atmosphere. We analyzed the influence of peat soil and land cover distribution on the occurrence and characteristics of vegetation fires. Two years of satellite-based active fire detections over Peninsular Malaysia, Sumatra, Borneo and Java were examined together with land cover and peatland maps. Our results showed that fire occurrence nearly tripled (23,000 → 68,000) from a wet La Niña year (2008) to a drier El Niño year (2009). In both years, fires were concentrated in peatlands (in 2009 41% of fires vs. 10% of land area), and the majority of large-scale burning took place in peatlands. Variation in peatland land cover within the study area was noticed to create remarkable different fire regimes. Biomass burning in the intensely managed Sumatran peatlands was characterized by large-scale land clearance fires that took place annually to varying extent. The largely unmanaged degraded peatland ecosystems of Borneo, on the other hand, experienced very little fire activity in a wet year but were ravaged by large-scale wildfires when El Niño conditions arose. We conclude that fire regime characteristics in insular Southeast Asia are strongly connected to occurrence of peat soil and land management status. This leads to high variation of fire activity within this region both annually (depending on weather patters) and over longer time range (depending on land cover/management issues) and greatly complicates estimation of the effects of fires.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans from food salt samples processed by heat treatment in Korea

Eight samples of processed food salt collected from five plants in Korea were analyzed for 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) using liquid-liquid extraction, clean-up procedures, and high resolution gas chromatography-high resolution mass spectrometry. The study included the analyses of two kinds of salt product sample: bamboo-salt and parched salt. The levels of toxic PCDD/Fs found in the salt product samples were extremely low: the results revealed TEQ levels ranging between the sub pg TEQ/g and sub fg TEQ/g. The differences in the TEQ values of toxic PCDD/F were observed between the salt product samples, which were treated with different frequency of baking using four different fuels (firewood, pine wood, pine resin, and indirect heating by gas) at temperatures from 300 to 2000 degrees C. In bamboo-salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.57-66 pg/g and 5.7x10(-5)-0.64 pg TEQ/g, respectively. PCDD/Fs levels in bamboo-salts baked by firewood were found to be higher than those baked by pinewood or pine resin. In parched salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.97-3.7 pg/g and 0.0097-0.017 pg TEQ/g, respectively. The data was discussed regarding the concentration and the distribution pattern of congeners.     

Radium isotopes in the Ulsan Bay

In order to estimate the fluxes of Ra isotopes, we measured 224Ra, 226Ra, and 228Ra activities in the Ulsan Bay mixing zone. The convex upwards curvature of the plot of Ra isotope activities versus salinity for the mixing zone suggests that Ra isotopes are supplied from particles entering the mixing zone from both the river and bottom sediments. This addition increases the estuarine flux of 226Ra and 228Ra to the outer sea by factors of 15 and 95 over the flux attributable to Ra dissolved in the riverine water alone. In order to estimate the residence time of the water in Ulsan Bay, we applied a mass balance model to the distribution of 224Ra and 226Ra activities in the Ulsan Bay mixing zone with the inflow from the Taehwa River. The obtained residence times of the waters in the Ulsan Bay were estimated to be 6.8-11.4 d. The waters in the upper part of the estuary have long residence times whereas those in the lower part, in contact with the open sea, have shorter residence times. The mean residence time of the water in the Ulsan Bay was estimated to be 9.1 d.     

Laboratory method of analysis of swarming behaviour in macroplankton: combination of a modified flume tank and stereophotographic techniques

This paper describes a flume tank in which the various physical and behavioural conditions encountered by swarming macroplankton can be manipulated, and a mathematical stereophotographic technique, for use in the calculation of the three-dimensional co-ordinates of individual organisms within the swarms. The mathematical model incorporates the Direct-Linear Transformation equation which describes the position of the object and its image in relation to the camera-perspective centre of the photographic system. Combining this equation with a modified light-ray tracement technique to solve for the passage of light through a three-media environment, the actual three-dimensional co-ordinates of the individual organisms and subsequently their inter-individual distances, bearings and angles of elevation may be derived. The distances between adjacent animals can be measured to an accuracy of 0.24 mm (SD=0.21) using this photogrammetric technique. The design of the flume tank allows for the manipulation of water current speed and flow patterns, substrate, and light intensity. Six species of mysid and one species of euphausiid have been induced to swarm in the flume tank. The conditions required to induce swarming and schooling in the laboratory are described. The inter-individual distances, bearings and angles of elevation have been calculated for Paramesopodopsis rufa, Anisomysis mixta australis, Australerythrops paradicei (Crustacea: Mysidacea) and Nyctiphanes australis (Crustacea: Euphausiacea) using the stereophotographic technique.     

Efficacy of rapeseed residue and eggshell waste on enzyme activity and soil quality in rice paddy

Addition of plant residue into soils improves soil physiochemical properties and its fertility. Rapeseed residue is an emerging N source to paddy soils via rice-rape double-cropping practice. The objective of this study was to evaluate the effects of rapeseed residue and eggshell waste on chemical changes and enzyme activity in the rice paddy soil. The powdered eggshells at 0, 1, 3, and 5% were applied once to 7.0 kg paddy repacked soils in each pot treated with the rapeseed residue or the conventional N, P, and K fertilisers. Eight rice seedlings (Oriza sativa L. cv. Ilmibyeo) (40 days after sowing) were transplanted to the treated each pot. The contents of total C (TC) and N (TN), and organic matter (OM) were significantly increased in soils treated with the rapeseed residue compared to the N, P, and K fertilisers. With the addition of eggshell containing ～92% CaCO₃, a considerable increase of soil pH was observed in soils treated with the rapeseed residue and the N, P, and K fertilisers, compared to the untreated soil. Activities of β-glucosidase, urease, and arylsulfatase enzymes were higher in soils treated with the rapeseed residue than soils treated with the N, P, and K fertilisers. The eggshell additions at 1, 3, and 5% into soils treated with the rapeseed residue increased enzyme activity mainly resulting from N mineralisation, whereas no change in enzyme activity was observed in the soils treated with the NPK fertiliser. The combined use of the rapeseed residue and the eggshells can be beneficial to improve soil environment.     

Differences in Eye and Hand Movements of Novice and Experienced Press Operators

Presses are very widely used in industrial and commercial companies and are often the source of serious accidents occurring during operation. Most of the accidents are due to inadequate training of novice operators. Continuous recordings of eye and hand movements of five novice operators and five experienced operators in press operation were made. Significant difference between novice and experienced operators was observed in eye fixation time, eye movement patterns, hand dwell time, and eye-hand coordination. Also, differences were observed in spatial distribution of eye fixations during the die-closing portion of a stroke. There were no significant differences between novice and experienced operators in the eye and the hand movement time. The results could be used as basic data to establish a guide determining the method and training period to train novice operators.     

Optimising the preparation of activated carbon from digested sewage sludge and coconut husk.

Preparation of activated carbon from sewage sludge is a promising way to dispose of sewage sludge as well as to produce a low-cost adsorbent for pollutant removal. This research work aimed to optimise the condition for activated carbon preparation from anaerobically digested sewage sludge with the additive coconut husk. The sewage sludge sample was mixed with the additive coconut husk. The preparation condition variables investigated involved the concentration of the ZnCl2 solutions, heating temperature, dwell time and heating rate in pyrolysis and the mixing ratio of coconut husk to sewage sludge. Surface area, pore size distribution, aqueous phenol adsorption capacity and the production yield of the final products were determined and compared. Experimental results revealed that low concentrations of ZnCl2 solution tended to improve the microporosity of the final product. Heating temperature had a considerable impact on the surface area, pore size distribution and phenol adsorption capacity of the final products, whereas dwell time and heating rate performed comparatively insignificantly. The effect of increasing the mixing ratio of coconut husk to sewage sludge was principally to increase the microporosity of the final products. The activated carbon with the highest BET surface area was produced with the activation of 5 M ZnCl2 solution and, thereafter, pyrolysis at a heating temperature of 500 degrees C for 2 h with a heating rate of 10 degrees C/min. The mixing ratio of 1:4 in terms of coconut husk to sewage sludge based on their dried weights was found to be most cost effective.     

Performance of an electrochemical COD (chemical oxygen demand) sensor with an electrode-surface grinding unit

An electrochemical COD (chemical oxygen demand) sensor using an electrode-surface grinding unit was investigated. The electrolyzing (oxidizing) action of copper on an organic species was used as the basis of the COD measuring sensor. Using a simple three-electrode cell and a surface grinding unit, the organic species is activated by the catalytic action of copper and oxidized at a working electrode, poised at a positive potential. When synthetic wastewater was fed into the system, the measured Coulombic yields were found to be dependent on the COD of the synthetic wastewater. A linear correlation between the Coulombic yields and the COD of the synthetic wastewater was established (10-1000 mg L(-1)) when the electrode-surface grinding procedure was activated briefly at 8 h intervals. When various kinds of wastewater samples obtained from various sewage treatment plants were measured, linear correlations (r(2)> or = 0.92) between the measured EOD (electrochemical oxygen demand) value and COD of the samples were observed. At a practical wastewater treatment plant, the measurement system was successfully operated with high accuracy and good stability over 3 months. These experimental results show that the application of the measurement system would be a rapid and practical method for the determination of COD in water industries.     

The Influence of pH on Mobility of Heavy Metals from Municipal Solid Waste Incinerator Fly Ash

Incineration has become one of the principal methods for municipal solid waste disposal particularly in all large cities throughout the world. Currently, the municipal solid waste incinerator fly ashes (MSWIF) are disposed of by landfill. The metal speciation of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) in MSWIF after been extracted with water at different pH values were examined using a sequential extraction procedure. The extraction sequence was as follows: (1) Exchangeable (NaOAc, pH 8.2), (2) Bound to Carbonates (NaOAc, pH 5.0), (3) Bound to metal oxides (HONH3Cl), (4) Bound to organic matters (HNO3, H2O2), and (5) Residual (HNO3, HCl, H2O2, HF, 1:3:1:3). The heavy metal contents in the extraction solutions were determined by inductively coupled plasma atomic emission spectrometry. The heavy metal concentrations in the different fractions obtained by sequential extraction show distinct distribution trends. The extractable fraction ranges from 25.5 to 88% of the total element content. With the pH of the extractant fall below the neutral and acidic ranges, the concentrations of heavy metals rise substantially due to the released of metals bound to carbonate fraction.