Optimising the preparation of activated carbon from digested sewage sludge and coconut husk.

Preparation of activated carbon from sewage sludge is a promising way to dispose of sewage sludge as well as to produce a low-cost adsorbent for pollutant removal. This research work aimed to optimise the condition for activated carbon preparation from anaerobically digested sewage sludge with the additive coconut husk. The sewage sludge sample was mixed with the additive coconut husk. The preparation condition variables investigated involved the concentration of the ZnCl2 solutions, heating temperature, dwell time and heating rate in pyrolysis and the mixing ratio of coconut husk to sewage sludge. Surface area, pore size distribution, aqueous phenol adsorption capacity and the production yield of the final products were determined and compared. Experimental results revealed that low concentrations of ZnCl2 solution tended to improve the microporosity of the final product. Heating temperature had a considerable impact on the surface area, pore size distribution and phenol adsorption capacity of the final products, whereas dwell time and heating rate performed comparatively insignificantly. The effect of increasing the mixing ratio of coconut husk to sewage sludge was principally to increase the microporosity of the final products. The activated carbon with the highest BET surface area was produced with the activation of 5 M ZnCl2 solution and, thereafter, pyrolysis at a heating temperature of 500 degrees C for 2 h with a heating rate of 10 degrees C/min. The mixing ratio of 1:4 in terms of coconut husk to sewage sludge based on their dried weights was found to be most cost effective.     

Non-Conventional Construction Materials from Dredging Spoils

As a result of increasing environmental concerns on offshore dumping, dredging spoils arising from reclamation and harbour works will create another problem of disposal. The spoils are usually not suitable for use as landfill materials as they have little bearing capacities. The disposal problem could, however, be reduced if there is an alternative use for it. This paper describes a laboratory study on the use of dredging spoils together with limestone as raw materials for the production of cementitious building materials. Different compositions of the raw materials were ground and incinerated to produce cement. The cementitious material produced after incineration was also mixed with ordinary Portland cement for use as blended cement. The study shows that dredging spoils could be used to produce cement satisfying the strength requirements for masonry cement. When used as blended cement, it can replace up to 30% by weight of ordinary Portland cement without reducing the strength.     

Differential pressure in membrane channel caused by foulant capture onto spacers.

Feed spacers in spiral-wound reverse osmosis membrane modules are highly susceptible to deposition or attachment of suspended particulates and organic matters in the feed stream. This type of fouling can cause a significant pressure drop along the membrane channel (differential pressure) without much effect on the average permeate flux. In practical applications, membrane cleaning is often triggered when the differential pressure in a membrane channel exceeds a threshold value. A mathematical model was developed to simulate the development of differential pressure in the feed channel resulting from foulant capture by the feed spacers. Simulations were carried out to investigate and demonstrate the effect of various parameters on differential pressures in the membrane channel. Differential pressures observed in a two-stage reverse osmosis water reclamation plant were simulated with the model, and the results showed that the model could adequately describe the increase of differential pressure with operating time in the reverse osmosis plant.     

Anaerobic digestion of polyelectrolyte flocculated waste activated sludge

This work examined how adding one of three polyelectrolyte flocculants (T3052: cationic, T2000: non-ionic, and T1052: anionic) affected the anaerobic digestion of wastewater sludge. Methane production, floc characteristics (morphology and zeta-potential) and process parameters (soluble chemical oxygen demands (SCODs) and reductive potentials) were monitored along the digestion tests. The digestion rates of T2000- and T1052-conditioned sludge resembled that for original sludge. The T3052-flocculated sludge generated methane at a higher rate during the first 6 days of digestion than did the original one. In the following stage, the digestion rate of sludge flocculated with T3052 at dosage exceeding 15 g/kg dried solids declined. For example, at 40 days of digestion the methane production amounts for original, 15 g/kg DS flocculated, and 40 g/kg flocculated sludge were of 136, 105, and 85 g/kg DS, respectively. The role of flocculants could change in different stages of digestion.The dosed polymers had no apparent toxicity to the inoculum used. The changes in SCOD, adenosintriphosphate concentrations, oxidative and reductive potential, and zeta-potentials did not correlate with the noted hindered digestion for T3052-conditioned sludge. Microphotographic observation revealed that the flocs of T3052-conditioned sludge were not only of a large size, but also were resistant to structural deterioration during digestion. Therefore, mass transfer resistance was proposed to account for the hindered digestion efficiency observed for T3052-conditioned sludge.     

Carbonaceous resin capsule for vapor-phase monitoring of volatile hydrocarbons in soil: partitioning and kinetic model verification

The resin capsule system (RCS) was tested as a means of providing data on the presence and forms of volatile hydrocarbons. Results indicated that resin capsules provided data showing sensitivity to soil variables (texture and moisture content) and time. The objectives of this paper are to evaluate the RCS methodology and to determine whether carbonaceous resin capsules provide results that can be described by fundamental chemical partitioning and kinetic principles. Findings revealed a significant relationship between quantities of benzene, toluene, ethylbenzene, and xylene adsorbed on the capsule and quantities partitioned into the vapor phase. Kinetic evaluation indicated that the vapor adsorption by the resin capsule is regulated by diffusion processes. No verification of rate-limiting processes was possible due to limitations imposed by the experimental design, but it appears that during early stages, adsorption rate was limited by vapor diffusion through the soil. The resin capsule data also reflected differences that would be expected due to properties of the organic liquids present. These results provide further evidence that the RCS could be developed to suggest direct in situ monitoring to reveal quantities and nature of organic substances in soils.     

Applying TRIZ principles in crowd management

Overcrowding that happens in places like concerts, stadiums or pilgrimage locations might sometimes cause injury or loss of life. Maintaining the safety of crowd in these places is therefore very important. In addition, increasing the performance of the buildings and structures has always been an important concern. Most of the previous work focused on using new devices and methods for monitoring and management of the crowd but they rarely focus on a comprehensive and structured approach with the purpose of increasing efficiency and safety. In this paper, we explore a Russian “Theory of Inventive Problem Solving”, TRIZ, to see whether its principles can help us to solve or improve overcrowding issues. More specifically we find the contradictions that arise in the context of crowd management and we observe which of the categorical solutions suggested by TRIZ might possibly be useful for our problem. Increasing the crowd capacity in a relatively small area, which leads to overcrowding, is one of the common contradictions in crowd management. TRIZ has been suggested as a good method for solving problems which involve contradiction and thus, chosen for this purpose.     

Stressor identification and health assessment of fish exposed to wastewater effluents in Miho Stream, South Korea

This study evaluated the effects of an industrial wastewater treatment plant (IWTP) and a municipal wastewater treatment plant (MWTP) effluents on a variety of bioindicators ranging from biochemical, organism, and population-level responses in pale chub (Zacco platypus) and fish community structure. The Index of Biotic Integrity (IBI) indicated that the site upstream of these wastewater treatment plant discharges is in fair–good condition and downstream of the plant is in poor condition. The EROD (ethoxyresorufin-O-deethylase) activity, condition factor, and liver somatic index were significantly increased at the downstream site compared to those of the upstream site. The most significant change observed in pale chub population in the downstream site of the Miho Stream, relative to the upstream population, was the total absence of an younger age group. Stressors impacting the downstream site were identified as mostly organic or nutrient enrichment and habitat degradation associated with wastewater treatment plants. The results of causal analysis suggest that the primary causes affecting fish population in the downstream site are through both size-selective mortality caused by ammonia toxicity and recruitment failure caused by habitat degradation and reproduction problem due to an IWTP and MWTP effluents.     

Effects of copper (I) oxide on growth and biochemical compositions of two marine microalgae

In copper based antifouling (AF) paints Cu (I) oxide was largely used as booster biocide. In this study effect of Cu (I) oxide on two marine microalgae, Tetraselmis suecica and Dunaliella tertiolecta was demonstrated. EC50 (96 hr) concentrations estimated for T. suecica and D. tertiolecta were 1.3 mg l(-1) and 1.34 mg l(-1), respectively. Copper (I) oxide induced changes in growth, chlorophyll, carbohydrate and protein contents were observed in T. suecica and D. tertiolecta. At low concentration of 0.0625 mg l(-1), 3-26% and 1-16% growth stimulation was observed in T. suecica and T. tertiolecta respectively. Increasing Cu (I) oxide concentrations proportionately decreased the carbohydrate and protein contents. This study clearly indicates the toxicity of excessive Cu (I) oxide on growth and biochemical compositions of T. suecica and D. tertiolecta.     

Fungal laccase-catalyzed degradation of hydroxy polychlorinated biphenyls

Hydroxy polychlorinated biphenyls (hydroxy PCBs) are toxic metabolites of PCBs. Their toxicity such as strong endocrine disruption demands effective remediation methods. Laccases from Trametes versicolor and Pleurotus ostreatus were tested to degrade hydroxy PCBs. Optimum pHs for both enzymes were around 4.0. Laccase from T. versicolor degrades hydroxy PCBs more rapidly than that from P. ostreatus. The enzymatic activities remained little changes in up to 10% organic solvents, but decreased rapidly in more than 10% acetone, acetonitrile or DMSO. Degradation rate constants decreased with increase of chlorination and no degradation was observed with tetra-, penta- and hexa-chloro hydroxy PCBs in non-mediated reactions. However, the tetra- to hexa-chloro hydroxy PCBs were degraded by laccase from T. versicolor in the presence of the mediator 2,2,6,6-tetramethylpiperidine-N-oxy radical. The other mediators, 4-ethyl-2-methoxyphenol, 2,2'-azino-bis(3-ethylbenzthiazoline sulfonic acid) diammonium salt and 1-hydroxybenzotriazole and humic acid, also enhanced degradation of all the hydroxy PCBs except 4-hydroxy-2',3,3',4',5,5'-hexachlorobiphenyl. The results showed that 3-hydroxy biphenyl was more resistant to laccase degradation than 2- or 4-hydroxy analogues. Significant linear-correlations (coefficient of determination, r2 = 0.9097 and 0.8186 for laccases from P. ostreatus and T. versicolor, respectively) were found between the ionization potentials and the removal rate constants of hydroxy PCBs.     

Comparison of the physical and chemical characteristics of fine road dust at different urban sites

The size distribution and chemical components of a fine fraction (<2.5 μm) of road dust collected at urban sites in Korea (Gwangju) and Mongolia (Ulaanbaatar) where distinct urban characteristics exist were measured. A clear bimodal size distribution was observed for the resuspended fine road dust at the urban sites in Korea. The first mode peaked at 100–110 nm, and the second peak was observed at 435–570 nm. Ultrafine mode (~30 nm) was found for the fine road dust at the Mongolia site, which was significantly affected by residential coal/biomass burning. The contribution of the water-soluble ions to the fine road dust was higher at the sites in Mongolia (15.8–16.8%) than at those in Korea (1.2–4.8%). Sulfate and chloride were the most dominant ionic species for the fine road dust in Mongolia. As (arsenic) was also much higher for the Mongolian road dust than the others. The sulfate, chloride, and As mainly come from coal burning activity, suggesting that coal and biomass combustion in Mongolia during the heating season should affect the size and chemical components of the fine road dust. Cu (copper) and Zn (zinc), carbonaceous particles (organic carbon [OC] and elemental carbon [EC]) increased at sites in Korea, suggesting that the fine road dust at these sites was significantly affected by the high volume of traffic (engine emission and brake/tire wear). Our results suggest that chemical profiles for road dust specific to certain sites should be applied to more accurately apportion road dust source contributing to the ambient particulate matter.

Implications: Size and chemical characteristics of fine road dust at sites having distinct urban characteristics were examined. Residential coal and biomass burning and traffic affected physiochemical properties of the fine road dust. Different road dust profiles at different sites should be needed to determine the ambient PM2.5 sources more accurately.