Comparison of the physical and chemical characteristics of fine road dust at different urban sites

The size distribution and chemical components of a fine fraction (<2.5 μm) of road dust collected at urban sites in Korea (Gwangju) and Mongolia (Ulaanbaatar) where distinct urban characteristics exist were measured. A clear bimodal size distribution was observed for the resuspended fine road dust at the urban sites in Korea. The first mode peaked at 100–110 nm, and the second peak was observed at 435–570 nm. Ultrafine mode (~30 nm) was found for the fine road dust at the Mongolia site, which was significantly affected by residential coal/biomass burning. The contribution of the water-soluble ions to the fine road dust was higher at the sites in Mongolia (15.8–16.8%) than at those in Korea (1.2–4.8%). Sulfate and chloride were the most dominant ionic species for the fine road dust in Mongolia. As (arsenic) was also much higher for the Mongolian road dust than the others. The sulfate, chloride, and As mainly come from coal burning activity, suggesting that coal and biomass combustion in Mongolia during the heating season should affect the size and chemical components of the fine road dust. Cu (copper) and Zn (zinc), carbonaceous particles (organic carbon [OC] and elemental carbon [EC]) increased at sites in Korea, suggesting that the fine road dust at these sites was significantly affected by the high volume of traffic (engine emission and brake/tire wear). Our results suggest that chemical profiles for road dust specific to certain sites should be applied to more accurately apportion road dust source contributing to the ambient particulate matter.

Implications: Size and chemical characteristics of fine road dust at sites having distinct urban characteristics were examined. Residential coal and biomass burning and traffic affected physiochemical properties of the fine road dust. Different road dust profiles at different sites should be needed to determine the ambient PM2.5 sources more accurately.     

Recovering valuable metals from recycled photovoltaic modules

Recovering valuable metals such as Si, Ag, Cu, and Al has become a pressing issue as end-of-life photovoltaic modules need to be recycled in the near future to meet legislative requirements in most countries. Of major interest is the recovery and recycling of high-purity silicon (>99.9%) for the production of wafers and semiconductors. The value of Si in crystalline-type photovoltaic modules is estimated to be ?$95/kW at the 2012 metal price. At the current installed capacity of 30 GW/yr, the metal value in the PV modules represents valuable resources that should be recovered in the future. The recycling of end-of-life photovoltaic modules would supply >88,000 and 207,000 tpa Si by 2040 and 2050, respectively. This represents more than 50% of the required Si for module fabrication. Experimental testwork on crystalline Si modules could recover a >99.98%-grade Si product by HNO₃/NaOH leaching to remove Al, Ag, and Ti and other metal ions from the doped Si. A further pyrometallurgical smelting at 1520ºC using CaO–CaF₂–SiO₂ slag mixture to scavenge the residual metals after acid leaching could finally produce >99.998%-grade Si. A process based on HNO₃/NaOH leaching and subsequent smelting is proposed for recycling Si from rejected or recycled photovoltaic modules.

Implications:The photovoltaic industry is considering options of recycling PV modules to recover metals such as Si, Ag, Cu, Al, and others used in the manufacturing of the PV cells. This is to retain its “green” image and to comply with current legislations in several countries. An evaluation of potential resources made available from PV wastes and the technologies used for processing these materials is therefore of significant importance to the industry. Of interest are the costs of processing and the potential revenues gained from recycling, which should determine the viability of economic recycling of PV modules in the future.     

Transgenic poplar trees expressing yeast cadmium factor 1 exhibit the characteristics necessary for the phytoremediation of mine tailing soil

Genetic engineering of plants for phytoremediation is thought to be possible based on results using model plants expressing genes involved in heavy metal resistance, which improve the plant’s tolerance of heavy metals and accumulation capacity. The next step of progress in this technology requires the genetic engineering of plants that produce large amounts of biomass and the testing of these transgenic plants in contaminated soils. Thus, we transformed a sterile line of poplar Populus alba X P. tremula var. glandulosa with a heavy metal resistance gene, ScYCF1 (yeast cadmium factor 1), which encodes a transporter that sequesters toxic metal(loid)s into the vacuoles of budding yeast, and tested these transgenic plants in soil taken from a closed mine site contaminated with multiple toxic metal(loid)s under greenhouse and field conditions. The YCF1-expressing transgenic poplar plants exhibited enhanced growth, reduced toxicity symptoms, and increased Cd content in the aerial tissue compared to the non-transgenic plants. Furthermore, the plants accumulated increased amounts of Cd, Zn, and Pb in the root, because they could establish an extensive root system in mine tailing soil. These results suggest that the generation of YCF1-expressing transgenic poplar represents the first step towards producing plants for phytoremediation. The YCF1-expressing poplar may be useful for phytostabilization and phytoattenuation, especially in highly contaminated regions, where wild-type plants cannot survive.     

The role and distribution of total suspended solids in the macrotidal coastal waters of Korea

Spatial and temporal distribution patterns of total suspended solids (TSS) in the shallow and macrotidal regions of the Korean peninsula indicated there were significant changes in TSS concentrations. These were seasonally influenced by the wind, river input and tidal cycle. There were high TSS values at estuarine and river mouth stations and during low tide due to the re-suspension of bottom sediment by strong wind action during winter months, in addition the land input through rivers and strong tidal current during ebbing. Monthly mean values of TSS significantly correlated with wind speed and nitrate concentration (p < 0.01). This indicated that the resuspension of surface sediment was a more important source of TSS than the river input, and that nitrate was introduced into the water column during the resuspension process. TSS were seven times higher at low tide than in high tide. Light penetration was significantly inhibited by TSS; as >98% of incident light was absorbed within 2 m and zero photosynthetically active radiation (PAR) under 2 m in the estuarine stations during winter. Removal of heavy metals and nutrients by TSS in the water column was evident. Over 80% of the initial concentration of nutrients was removed within 10 min under various concentrations of TSS and also TSS contained significantly higher concentration of heavy metals than surface sediment. The concentration levels of nutrients and chemical oxygen demand in the west coast were comparable with the East and South Sea, even the major rivers in the Korean peninsula flow into the West Sea with major pollutant loadings into the coastal areas. High concentration of TSS is likely to contribute to the removal process of these pollutants, resulting in relatively lower levels of nutrients and organic materials in these coastal waters.     

Mussel watch program for organic contaminants along the Korean coast, 2001–2007

The level and extent of organic contaminants along the Korean coast were estimated through the mussel watch program, established in 2001. Mussels and oysters were collected at 20 sites along the Korean coast in 2001 and at 25 sites from 2002 to 2007. The mussel tissues were analyzed for PCBs, organochlorine presticides, PAHs, BTs, and PCDD/Fs. PCBs, PAHs, BTs, and PCDD/Fs were ubiquitous contaminants along the Korean coast, showing mean detection frequencies of more than 95% over 7 years. The concentrations of organic contaminants in mussels along the Korean coast were relatively low or moderate compared with foreign studies. Concentrations of DDTs, PCBs, and PCDD/Fs were below the action or maximum levels for humans established by USFDA and EU. Elevated concentrations above the 85th percentile were found for PCBs, PAHs, BTs, and PCDD/Fs at sites near industrial complexes or big harbors, for HCHs at sites near non-industrial complexes, and for DDTs at sites near both non-industrial and industrial complexes. Using two nonparametric tests to assess temporal trends, the Spearman test revealed that BTs and PCDD/Fs had significant decreasing trends at four sites (Gwangyang Bay, Cheonsu Bay, Garorym Bay, and the Incheon coast) and at six sites (Hupo coast, Guryongpo coast, eastern part of Geojedo, Gunsan coast, Garorym Bay, and Asan Bay), respectively.     

Preliminary Study of Non-woven Composite: Effect of Needle Punching and Kenaf Fiber Loadings on Non-woven Thermoplastic Composites Prepared From Kenaf and Polypropylene Fiber

Non-woven composites were produced using kenaf (bast) fiber and polypropylene (PP) fiber. The effects of needle punching process, number of needle and kenaf fiber loadings on the properties of non-woven composite were studied. The aspect ratio of kenaf fiber was also measured in this study. The aspect ratio of most of kenaf fiber used was in the range of 200–400. The results indicated that the mechanical strength of the non-woven composite was significantly influenced by the percentage of kenaf fiber. This may due to the evenly mixed kenaf and PP fibers during carding process prior to the mechanical interlocking by needle punching process. The tensile strength, modulus and toughness were enhanced with the incorporation of carded and needle punched fibers. The number of needle used in needle punching process had a significant effect on the strength of the composite. This was evident in SEM micrograph where composite prepared from carded to needle punched non-woven web showed better wettability as compared to composite prepared from carded non-woven web only. However, no significant difference was observed in water absorption and thickness swelling tests for composites prepared with different number of needles.     

Soil pollution assessment and identification of hyperaccumulating plants in chromated copper arsenate (CCA) contaminated sites, Korea

In recent decades, heavy metal contamination in soil adjacent to chromated copper arsenate (CCA) treated wood has received increasing attention. This study was conducted to determine the pollution level (PL) based on the concentrations of Cr, Cu and As in soils and to evaluate the remediative capacity of native plant species grown in the CCA contaminated site, Gangwon Province, Korea. The pollution index (PI), integrated pollution index (IPI), bioaccumulation factors (BAF_shoots and BAF_roots) and translocation factor (TF) were determined to ensure soil contamination and phytoremediation availability. The 19 soil samples from 10 locations possibly contaminated with Cr, Cu and As were collected. The concentrations of Cr, Cu and As in the soil samples ranged from 50.56-94.13 mg kg⁻¹, 27.78-120.83 mg kg⁻¹, and 0.13-9.43 mg kg⁻¹, respectively. Generally, the metal concentrations decreased as the distance between the CCA-treated wood structure and sampling point increased. For investigating phytoremediative capacity, the 19 native plant species were also collected in the same area with soil samples. Our results showed that only one plant species of Iris ensata, which presented the highest accumulations of Cr (1120 mg kg⁻¹) in its shoot, was identified as a hyperaccumulator. Moreover, the relatively higher values of BAF_shoot (3.23-22.10) were observed for Typha orientalis, Iris ensata and Scirpus radicans Schk, suggesting that these plant species might be applicable for selective metal extraction from the soils. For phytostabilization, the 15 plant species with BAF_root values > 1 and TF values < 1 were suitable; however, Typha orientalis was the best for Cr.     

BETR global--a geographically-explicit global-scale multimedia contaminant fate model

We present two new software implementations of the BETR Global multimedia contaminant fate model. The model uses steady-state or non-steady-state mass-balance calculations to describe the fate and transport of persistent organic pollutants using a desktop computer. The global environment is described using a database of long-term average monthly conditions on a 15° × 15° grid. We demonstrate BETR Global by modeling the global sources, transport, and removal of decamethylcyclopentasiloxane (D5).     

Detecting deforestation with a spectral change detection approach using multitemporal Landsat data: a case study of Kinabalu Park, Sabah, Malaysia

Tropical deforestation is occurring at an alarming rate, threatening the ecological integrity of protected areas. This makes it vital to regularly assess protected areas to confirm the efficacy of measures that protect that area from clearing. Satellite remote sensing offers a systematic and objective means for detecting and monitoring deforestation. This paper examines a spectral change approach to detect deforestation using pattern decomposition (PD) coefficients from multitemporal Landsat data. Our results show that the PD coefficients for soil and vegetation can be used to detect deforestation using change vector analysis (CVA). CVA analysis demonstrates that deforestation in the Kinabalu area, Sabah, Malaysia has significantly slowed from 1.2% in period 1 (1973 and 1991) to 0.1% in period 2 (1991 and 1996). A comparison of deforestation both inside and outside Kinabalu Park has highlighted the effectiveness of the park in protecting the tropical forest against clearing. However, the park is still facing pressure from the area immediately surrounding the park (the 1km buffer zone) where the deforestation rate has remained unchanged.