Potential application of sludge produced from coal mine drainage treatment for removing Zn(II) in an aqueous phase

Various analyses of physico-chemical characteristics and batch tests were conducted with the sludge obtained from a full-scale electrolysis facility for treating coal mine drainage in order to find the applicability of sludge as a material for removing Zn(II) in an aqueous phase. The physico-chemical analysis results indicated that coal mine drainage sludge (CMDS) had a high specific surface area and also satisfied the standard of toxicity characteristic leaching procedure (TCLP) because the extracted concentrations of certain toxic elements such as Pb, Cu, As, Hg, Zn, and Ni were much less than their regulatory limits. The results of X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the CMDS mainly consists of goethite (70%) and calcite (30%) as a weight basis. However, the zeta potential analysis represented that the CMDS had a lower isoelectric point of pH (pH(IEP)) than that of goethite or calcite. This might have been caused by the complexation of negatively charged anions, especially sulfate, which usually exists with a high concentration in coal mine drainage. The results of Fourier transform infrared (FT-IR) spectrometry analysis revealed that Zn(II) was dominantly removed as a form of precipitation by calcite, such as smithsonite [ZnCO?] or hydrozincite [Zn?(CO?)?(OH)?]. Recycling sludge, originally a waste material, for the removal process of Zn(II), as well as other heavy metals, could be beneficial due to its high and speedy removal capability and low economic costs.     

Enzymatic conversion of newspaper and office paper to fermentable sugars

Two types of waste paper materials, newspaper and office paper, were evaluated for their potential to be used as renewable feedstock for the production of fermentable sugars via the enzymatic hydrolysis of their cellulose fractions. The effects of four factors (hydrolysis time, enzyme loading, surfactant addition and phosphoric acid pretreatment) on the extent of sugar yield were assessed and quantified by using a methodical approach based on response surface methodology. The statistical experimental design used in this study requires fewer experimental runs compared to some commonly used experimental designs. In the newspaper hydrolysis case, response surface plots revealed that the degree of sugar release increased with an increase in hydrolysis time but it was hardly affected by the enzyme loading and acid pretreatment factors. The surfactant addition factor exhibited a positive effect when the enzyme loading level was relatively low. With office paper as the substrate, three of the four factors (hydrolysis time, enzyme loading and acid pretreatment) exhibited positive effects on the extent of sugar release. At local optimum conditions, the maximum sugar yield from office paper was found to be 0.82 g of reducing sugars per gram of paper, which was about 4.8 times higher than the maximum sugar release from the newspaper substrate.     

Kinetics of reductive denitrification by nanoscale zero-valent iron

Zero-valent iron powder (Fe0) has been determined to be potentially useful for the removal of nitrate in the water environment. This research is aimed at subjecting the kinetics of denitrification by nanoscale Fe0 to an analysis of factors affecting the chemical denitrification of nitrate. Nanoscale iron particles with a diameter in the range of 1-100 nm, which are characterized by the large BET specific surface area to mass ratio (31.4 m2/g), removed mostly 50, 100, 200, and 400 mg/l of nitrate within a period of 30 min with little intermediates. Compared with microscale (75-150 microm) Fe0, end product is not ammonia but N2 gas. Kinetics analysis from batch studies revealed that the denitrification reaction with nanoscale Fe0 appeared to be a pseudo first-order with respect to substrate and the observed reaction rate constant (k(obs)) varied with iron content at a relatively low degree of application. The effects of mixing intensity (rpm) on the denitrification rate suggest that the denitrification appears to be coupled with oxidative dissolution of iron through a largely mass transport-limited surface reaction (<40 rpm).     

Organochlorine pesticides (HCHs and DDTs) in soils along the north coastal areas of the Bohai Sea,China

A systematic survey of organochlorine pesticides (OCPs) including hexachlorocyclohexane isomers (α-HCH, β-HCH, γ-HCH, δ-HCH and ΣHCH) and dichlorodiphenyltrichloroethane metabolites (p,p′-DDT, p,p′-DDE, o,p′-DDT, p,p′-DDD and ∑DDT) in soils along the north coastal areas of the Bohai Sea, China, has been lacking. In this study, 31 representative surface soil samples were collected along the north coastal and riverine areas of the Bohai Sea to characterise the potential for adverse effects of ∑HCH, ∑DDT and their individual isomers and transformation products. Concentrations of ΣHCH and ΣDDT in soils ranged from less than the limit of detection (1 ng · g^?1 dw (mean: 3.5 ng · g^?1 dw) and2 ng · g^?1 dw (mean: 1.7 × 10¹ ng · g^?1 dw), respectively. Compared with studies of OCPs in soils from other locations, concentrations of HCHs and DDTs observed in this study were moderate. Concentrations of OCPs observed in soils were generally less than proposed reference values. HCH residues were a mixture of historical technical HCH and current lindane sources. The pattern of DDTs was consistent with historical releases of technical DDTs. Selected soil physicochemical properties did not explain the sorption and/or partitioning of HCHs or DDTs.     

Perfluorinated compounds in water and sediment from coastal regions of the northern Bohai Sea,China

Concentrations of perfluorooctanesulfonate (PFOS), perfluorooctanoic acid (PFOA) and other perfluorinated compounds (PFCs) were measured in water and sediment from coastal Bohai Bay and surrounding rivers flowing into the bay. Of the 15 PFCs measured, PFOS and PFOA were detected with the greatest frequency. Concentrations in water ranged from<0.2 to 31 ng·L^?1 and<1.0 to 82 ng·L^?1 for PFOS and PFOA, respectively. Concentrations of PFOS and PFOA in sediments ranged from<0.1 to 2.0 ng·g^?1 dw and<0.1 to 0.5 ng·g^?1 dw, respectively. Concentrations of PFCs in Bohai Bay were less than those observed in other areas in Asia, but greater concentrations of ∑PFCs were observed in the Dalin River with concentrations increasing from upstream to downstream, and the greatest concentrations in sediment were observed in tidal flats. The ratio of ∑PFCs in sediment and water indicated that sediment could serve as a significant sink for PFUnA.     

Ecological risk assessment of arsenic and metals in sediments of coastal areas of northern Bohai and Yellow Seas, China

Distributions of arsenic and metals in surface sediments collected from the coastal and estuarine areas of the northern Bohai and Yellow Seas, China, were investigated. An ecological risk assessment of arsenic and metals in the sediments was evaluated by three approaches: the Sediment Quality Guidelines (SQGs) of the United States Environmental Protection Agency (USEPA), the degree of contamination, and two sets of SQGs indices. Sediments from the estuaries of the Wuli and Yalu Rivers contained some of the greatest concentrations of arsenic, cadmium, copper, mercury, lead, and zinc. Median concentrations of cadmium and mean concentrations of lead and zinc were greater than background concentrations determined for the areas. All sediments were considered to be heavily polluted by arsenic, but moderately polluted by chromium, lead, and cadmium. Current concentrations of arsenic and metals are unlikely to be acutely toxic, but chronic exposures would be expected to cause adverse effects on benthic invertebrates at 31.4% of the sites.     

The physico-chemical properties and leaching behaviors of phosphatic clay for immobilizing heavy metals

In this study, phosphatic clay was used as a phosphate containing material. The fractionation of phosphorus was carried out using the CRM BCR-684 protocol, and the inorganic phosphorus, especially all the apatite phosphorus, was found as the major form. The elemental compositions of the phosphatic clay were identified using an X-ray fluorescence spectrometer, and was found to be mainly composed of CaO and P2O5. The specific surface area, pore volume and average pore diameter were measured also. Results of experiment show that the phosphatic clay may provide a cost-effective way to remediate heavy metal contaminated aqueous and slurry phase.     

Enhanced adsorption of arsenate on titanium dioxide using Ca and Mg ions

In this study, we report the effects of pH and divalent cations on the adsorption of arsenate (As(V)) by titanium dioxide (TiO₂) nanoparticles. The extent of As(V) adsorption on TiO₂ decreased with increasing pH due to the decrease of positively charged binding sites on the TiO₂ surface. The Langmuir maximum uptake capacity at pH 4 is about three times higher than that at pH 7. Here we show that the relatively low As(V) uptake at circumneutral pH could be substantially enhanced by the addition of common divalent cations such as magnesium and calcium. At a concentration of approximately 7 mM, magnesium and calcium increased the extent of As(V) adsorption from 2.1 to 6.5 and 7.7 mg As(V)/g TiO₂, respectively.