Leaching of aluminium from cookwares -- a review

Concern over the possible relation between environmental aluminium exposure and Alzheimer's disease has prompted studies of all forms of human intake of this element including that from foods. Aluminium cookware, apart from other sources of dietary aluminium, is considered to be a potential source of this metal to human beings. Various research groups have carried out aluminium leaching experiments with food, beverages and water under different experimental conditions modified by varying the level of pH, chloride, fluoride, citrate, acetate etc. The results reported by different workers show marked discrepancies in levels of leached aluminum. The apparent reason for such discrepancy in levels of aluminum leached can be attributed to factors such as non-systematic and non-uniform experimental designs, non-standard conditions maintained during the experiments and choice of method for aluminium analysis. In order to assess accurately the contribution of aluminium ingestion by human beings through aluminium cookware, the present review emphasises the need of i) standard size aluminium plates obtained from the same lot for one set of experimentations; ii) real life cooking conditions to highlight the role of various complexing species present in food e.g. citrate, oxalate, acetate, tartrate etc.; iii) role of chemistry of aluminium in presence of acidic, basic and neutral cooking medium and iv) strict analytical control in the estimation of aluminium. Results of a systematic study by the authors conducted on the abovementioned lines are also described.     

Exergy analysis of the transcritical N2O refrigeration cycle with a vortex tube

In this article, a comparative study is presented for the transcritical cycle with expansion valve (TCEV) and transcritical cycle with vortex tube (TCVT) mainly based on the second law of thermodynamics. Natural refrigerant nitrous oxide (N₂O) is used in both the cycles for analysis. The evaporator and gas cooler temperatures are varied from ?55°C to 5°C and 35°C to 60°C, respectively. The effects of various operating and design parameters on the optimum heat rejection pressure, coefficient of performance (COP), exergy loss (irreversibility), and the exergetic efficiency are studied. Exergy analysis of each component in TCEV and TCVT is performed to identify the amount and locations of irreversibility. It is observed that the use of the vortex tube in place of the expansion valve reduces the total exergy losses and increases the exergetic efficiency as well as COP. The exergetic efficiency and COP of the TCVT are on average 10–12% higher compared to TCEV for the considered operating conditions. The computed values of the exergetic efficiency for TCVT using refrigerant N₂O are the highest at an evaporator temperature of ?55°C, and the corresponding values of exergetic efficiency and exergy losses varies between 25.35% and 15.67% and between 74.65% and 84.33%, respectively. However, COP at the same evaporator temperature of ?55°C varies between 0.83 and 0.51. Furthermore, the optimum heat rejection pressure in TCVT is lower compared to that in TCEV. The results offer significant help for the optimum design and operating conditions of TCVT with refrigerant N₂O.     

Transparency in global sustainability governance: to what effect?

ABSTRACT

Transparency in environmental governance is no longer an uncontroversial answer to problems of accountability and effectiveness. How to design effective transparency systems and in what policy contexts they are effective remain contested issues. This special section, consisting of this introduction and four research articles, interrogates complex and potentially conflicting links between transparency, accountability, empowerment and effectiveness in environmental governance. Building on existing literature and the four contributions, we discuss persisting diversity in varieties of transparency, the evolving dynamics of commodity chain transparency, and the consequences of emerging novel forms of digitalized transparency. As we show, the contributions to this special section interrogate in novel ways the transformative potential of transparency, through shedding light on the performative effects of transparency in ever more complex environmental governance contexts. These contexts may include, inter alia, the growing ubiquity of traceability in transnational commodity chains, the need for ever more anticipatory (ex-ante) forms of environmental governance, and an ever-broadening quest for digitally monitored environments. In particular, the impacts of the real-time ‘radical’ transparency engendered by use of novel digital technologies remain under-analyzed in the sustainability domain. We conclude by raising several critical concerns that deserve further scientific research and policy debate.     

Duckweed: an effective tool for phyto-remediation

Effective wastewater treatment through conventional methods that rely on heavy aeration are expensive to install and operate. Duckweed is capable of recovering or extracting nutrients or pollutants and is an excellent candidate for bio-remediation of wastewaters. Such plants grow very fast, utilizing wastewater nutrients and also yield cost effective protein-rich biomass as a by-product. Duckweeds being tiny surface-floating plants are easy to harvest and have an appreciable amount of protein (15%–45% dry mass basis) and a lower fiber (7%–14% dry mass basis) content. Besides nutrient extraction, duckweeds has been found to reduce total suspended solids, biochemical oxygen demand (BOD), and chemical oxygen demand in wastewater significantly. Depending on the initial concentrations of nutrients, duckweed-covered systems can remove nitrate (NO₃^?) at daily rates of 120–590 mg NO₃^? m^?2 (73%–97% of initial concentration) and phosphate (PO₄^?) at 14–74 mg PO₄^? m^?2 (63%–99% of initial concentration). Removal efficiencies within 3 days of 96% and 99% have been reported for BOD and ammonia (NH₃). Besides several genera of duckweeds (Spirodela, Lemna, Wolffia), other surface-floating aquatic plants like water hyacinth (Eichhornia) are well known for their phyto-remediation qualities.     

Ecotoxicity studies of some organotin compounds

The ecotoxicities of three organic compounds containing spacer groups, an intermediate organotin premonomer, four organotin monomers, their homopolymers and six copolymers of tributylin α‐chloroacrylate (TCA) are reported against two microorganisms viz., Pseudomonas aeruginosa and Sarcina lutea and a larval species Anemia salina (Nauplii II). The organic compounds containing spacer group were less toxic whereas the monomers were found to be highly toxic. The homopolymers were found to be more toxic than that of tributyltin acrylate (TBTAA), tributyltin methacrylate (TBTMA) and tributyltin α‐Chloroacrylate (TCA). The toxicity of TCA copolymers increased with the increase in tributyltin (TBT) content in the polymer. From this study it was not possible to establish any relationship between the chemical nature of the comonomer with its toxicity.     

Socioeconomics and sources of livelihood security in Central Himalaya,India: a case study

ABSTRACT

This case study was conducted in Himalayan watershed to understand traditional farming and socio-economic status of the people in Kumaon Himalaya, Uttarakhand, India. In spite of high literacy rate in this area, their livelihood security is reliant on traditional farming practices that include agroforestry beside forest produce. More than 85% farming is rainfed and managed in a traditional way. Land holding size owned by farmers in the area extended from 0.57 to 2.57 ha but majority of farmers (51–80%) had farms of size less than 0.50 ha. The study revealed that forests provided 73–79% of required energy from fuelwood and more than 81% fodder. Agroforestry, livestock (dairy and poultry/goat rearing) and labour employment are the major sources of income to the people in the watershed. The income of people was positively correlated with livestock rearing and traditional farming.     

A facile eco-friendly approach for the one-pot synthesis of 3,4-dihydro-2<Emphasis Type="Italic">H</Emphasis>-naphtho[2,3-<Emphasis Type="Italic">e</Emphasis>][1,3]oxazine-5,10-diones using glycerol as a green media

1,3-Oxazines have a wide variety of biological activities. Naphthoquinone scaffolds also exhibit several biological responses such as antithrombotic, apoptosis and lipoxygenase inhibitors. There is, therefore, a need to develop efficient green methodologies for hybridizing the two scaffolds in a single entity. Herein, we report a novel protocol for the synthesis of 3-aryl-3,4-dihydro-2H-naphtho[2,3-e][1,3]oxazine-5,10-diones by one-pot three-component condensation of 2-hydroxy-1,4-naphthoquinone, aromatic amines and formaldehyde in glycerol at 50 °C. After separation of products, the glycerol–water layer was extracted using ethyl acetate and the dried glycerol layer was successfully reused several times. The products were obtained in 85–95 % yields in 5–10 min. This environmentally benign protocol holds advantages of high yields, operational simplicity and easy workup over our earlier report.     

Studies of Novel Chain Linked Biodegradable Polymers

The synthesis of high-molecular-weight lactic acid based polymers by chain linked polymerization was investigated. Lactic acid based hydroxyl terminated telechelic prepolymer was synthesized and then the molecular weight was increased by chain linked polymerization using methylene diphenyldiisocyanate. All polymerizations were carried out in the melt, using tin octoate as catalyst. The products were characterized by Differential scanning calorimetry, nuclear magnetic resonance spectroscopy and size exclusion chromatography. With the increase in diisocyanate concentration, an increase in the glass transition temperature, molecular weight and molecular weight distribution was observed.     

Optimization of regional hazardous waste management systems: an improved formulation

The planning and design of regional hazardous waste management system (RHWMS) involves selection of treatment and disposal facilities, allocation of hazardous wastes and waste residues from generator to the treatment and disposal sites and selection of the transportation routes. An improved formulation based upon multi-objective integer programming approach is presented to arrive at the optimal configuration of RHWMS components. This formulation addresses important practical issues like unique characteristics of the hazardous wastes reflecting on waste–waste and waste–technology compatibility. A utility function approach is presented to integrate both cost and risk related objectives. An illustrative case example is presented to demonstrate the usefulness of the improved formulation as a tool which can be used by environmental planning agencies in regional planning for hazardous waste management.