Hydrocarbon Production and Photochemical Ozone Formation in Forest Burn Plumes

The purpose of this paper is to describe ozone production in forest slash burn plumes. Plumes from controlled fires in the state of Washington were monitored using an instrumented aircraft. Ozone, oxides of nitrogen, condensation nuclei, and visual range (nephelometer) were measured continuously on board the plane. Airborne grab samples were collected for detailed hydrocarbon analysis.

The slash burn plumes were found to contain significant quantities of ozone. A buildup of 40–50 ppb above the ambient background ozone concentrations was not unusual. Hydrocarbon analyses revealed the presence of many photochemically reactive olefins in the plume. Hydrocarbon/NO _x ratios were favorable for photochemical oxidant production.     

Biodegradability and biodegradation rate of poly(caprolactone)-starch blend and poly(butylene succinate) biodegradable polymer under aerobic and anaerobic environment

The biodegradability and the biodegradation rate of two kinds biodegradable polymers; poly(caprolactone) (PCL)-starch blend and poly(butylene succinate) (PBS), were investigated under both aerobic and anaerobic conditions. PCL-starch blend was easily degraded, with 88% biodegradability in 44 days under aerobic conditions, and showed a biodegradation rate of 0.07 day⁻¹, whereas the biodegradability of PBS was only 31% in 80 days under the same conditions, with a biodegradation rate of 0.01 day⁻¹. Anaerobic bacteria degraded well PCL-starch blend (i.e., 83% biodegradability for 139 days); however, its biodegradation rate was relatively slow (6.1 mL CH₄/g-VS day) compared to that of cellulose (13.5 mL CH₄/g-VS day), which was used as a reference material. The PBS was barely degraded under anaerobic conditions, with only 2% biodegradability in 100 days. These results were consistent with the visual changes and FE-SEM images of the two biodegradable polymers after the landfill burial test, showing that only PCL-starch blend had various sized pinholes on the surface due to attack by microorganisms. This result may be use in deciding suitable final disposal approaches of different types of biodegradable polymers in the future.     

Effects of biodegradation and sorption by humic acid on the estrogenicity of 17β-estradiol

The removal of 17β-estradiol (E2) by biodegradation and sorption onto humic acid (HA) was examined at various HA concentrations. Subsequently, estrogenicity associated with E2 removal was estimated using E-screen bioassay. Results showed that E2 biodegradation and its subsequent transformation to estrone (E1) were significantly reduced with increasing HA concentration. In addition, the presence of nutrients enhanced the biodegradation of E2. Overall, E2 biodegradation was the dominating contributor to its removal, which demonstrated a significantly negative correlation with E2 sorption at various HA concentrations. The sorption of E2 by HA was significantly enhanced with increasing HA concentration. Estrogenicity associated with residual E2 showed that there existed a significant difference among various HA concentrations, with the lowest value in the absence of HA. The findings suggest that the presence of HA and nutrients in natural waters should be considered in assessing estrogenicity of environmental samples due to complex sorption and biodegradation processes.     

Enhanced methane recovery by food waste leachate injection into a landfill in Korea

The current food waste leachate (FWL) disposal practice in Korea warrants urgent attention and necessary action to develop an innovative and sustainable disposal strategy, which is both environmentally friendly and economically beneficial. In this study, methane production by FWL injection into a municipal solid waste landfill with landfill gas (LFG) recovery facility was evaluated for a period of more than 4 months. With the target of recovering LFG with methane content ~50%, optimum LFG extraction rate was decided by a trial and error approach during the field investigation in five different phases. The results showed that, upon FWL injection, LFG extraction rate of ~20 m(3)/h was reasonable to recover LFG with methane content ~58%. Considering the estimated methane production potential of 31.7 m(3) CH(4) per ton of FWL, methane recovery from the landfill was enhanced by 14%. The scientific findings of this short-term investigation indicates that FWL can be injected into the existing sanitary landfills to tackle the present issue and such landfills with efficient liner and gas collection facility can be utilized as absolute and sustainable environmental infrastructures.     

Spreadsheet‐based modeling of ISCO with permanganate

CDISCO, a Microsoft Excel spreadsheet–based model, can be used to assist with the design of in situ chemical oxidation (ISCO) systems using permanganate (MnO₄^?). The model inputs are the aquifer characteristics (porosity, hydraulic conductivity, effective aquifer thickness, natural oxidant demand, kinetic parameters, contaminant concentrations, etc.), injection conditions (permanganate injection concentration, flow rate, and duration), and unit costs for reagent, drilling, and labor. MnO₄^? transport in the aquifer is simulated and used to estimate the effective radius of influence (ROI) and required injection point spacing. CDISCO then provides a preliminary cost estimate for the selected design conditions. The user can perform multiple runs of CDISCO to optimize the cost of the ISCO design. Comparisons with analytical and numerical models of nonreactive and reactive transport demonstrate that CDISCO accurately simulates MnO₄^? transport and consumption. Comparison of CDISCO results with the three‐dimensional heterogeneous simulations show that aquifer volume contact efficiency and contaminant mass treatment efficiency are closely correlated with the ROI overlap factor. © 2011 Wiley Periodicals, Inc.     

Case study: P2 in a manufacturing plant

Pollution prevention is among the most cost‐effective environmental quality management tools —and P2 projects can yield ongoing savings. © 2000 John Wiley & Sons, Inc.     

Evaluation of maturity parameters and heavy metal contents in composts made from animal manure

The objective of this study was to evaluate a variety of maturity indices and heavy metal concentrations in the composting process. A full-scale study was performed on animal manures (dairy:beef:swine = 50%:30%:20%, w/w) mixed with sawdust using a self-screwed turner over a time period of 63 days. Several chemical compost characteristics and germination indices were monitored on samples collected weekly at a prototype composting facility. NH(4)-N concentrations decreased during the composting time, on the contrary NO(3)-N concentrations increased sharply after 30 days. As composting proceeded, the humic acids content increased from 1.45% to 2.70% of the organic carbon content, whereas the fulvic acids content decreased gradually. Temperature in the compost pile and concentration of NH(3) averaged 32.4 degrees C and 12.9 ppm at the initial composting phase and 69.5 degrees C and 47.3 ppm at the active bio-oxidation composting phase, respectively. Seed germination and germination index (GI) increased during the composting process, and the compost samples at the end of composting phase had GI values greater than 120. Among the composting processes, there were significant differences (p<0.05) in concentration of Zn, Cu and Pb in the compost. In conclusion, the suggested maturity parameter values and metal concentrations of composted animal manures can provide better understanding of maturation process of animal manure compost.     

Quantification of ammonia and hydrogen sulfide emitted from pig buildings in Korea

The aim of this field study was to determine the concentrations and emissions of ammonia and hydrogen sulfide in different types of pig buildings in Korea to allow objective comparison between pig housing types in Korea and other countries. Concentrations of ammonia and hydrogen sulfide in the pig buildings averaged 7.5ppm and 286.5ppb and ranged from 0.8 to 21.4ppm and from 45.8 to 1235ppb, respectively. The mean emissions of ammonia and hydrogen sulfide per pig (normalized to 75kg liveweight) and area (m2) from pig buildings were 250.2 and 37.8mg/h/pig and 336.3 and 50.9mg/h/m2, respectively. Ammonia and hydrogen sulfide concentrations and emissions were higher in the pig buildings managed with deep-pit manure systems with slats and mechanical ventilation than in other housing types.     

Toxicity identification and reduction of wastewaters from a pigment manufacturing factory

In this study, major toxicants in pigment wastewaters (i.e. raw wastewater and effluent) were determined by toxicity identification evaluations (TIEs), and changes in their toxicities due to combined gamma-ray (gamma-ray) and ozone treatments were evaluated. From TIE results using Daphnia magna, Cr(VI) and o-toluidine were identified as major toxicants in the raw wastewater with concentrations of 2.47 and 25.3mg l(-1), respectively. This was confirmed by subsequent spiking and mass balance approaches. For effluent, TIE results suggested that organic anions were likely responsible for the observed toxicities. Toxicity reduction tests showed that gamma-rays with ozone treatment after coagulation was more efficient in reducing toxicities in the raw wastewater (3.9-2.0 TU) than gamma-ray treatment alone (3.9-3.1 TU). For pigment effluent, gamma-ray/O3 treatment resulted in a complete removal of the acute toxicity.