Ozone disintegration of excess biomass and application to nitrogen removal.

A pilot-scale facility integrated with an ozonation unit was built to investigate the feasibility of using ozone-disintegration byproducts of wasted biomass as a carbon source for denitrification. Ozonation of biomass resulted in mass reduction by mineralization as well as by ozone-disintegrated biosolids recycling. Approximately 50% of wasted solids were recovered as available organic matter (ozonolysate), which included nonsettleable microparticles and soluble fractions. Microparticles were observed in abundance at relatively low levels of ozone doses, while soluble fractions became dominant at higher levels of ozone doses in ozone-disintegrated organics. Batch denitrification experiments showed that the ozonolysate could be used as a carbon source with a maximum denitrification rate of 3.66 mg nitrogen (N)/g volatile suspended solids (VSS) x h. Ozonolysate was also proven to enhance total nitrogen removal efficiency in the pilot-scale treatment facility. An optimal chemical oxygen demand (COD)-to-nitrogen ratio for complete denitrification was estimated as 5.13 g COD/g N. The nitrogen-removal performance of the modified intermittently decanted extended aeration process dependent on an external carbon supply could be described as a function of solids retention time.     

Copepod recruitment and food composition: do diatoms affect hatching success?

Laboratory experiments were conducted to differentiate between factors controlling the hatching success of copepod eggs. Factors that could affect viability of eggs; viz food quality, female condition and external factors were investigated. In a series of experiments the copepod Acartia tonsa Dana was fed several different diets while egg production and hatching success were monitored. The diet was analysed for fatty acid content as an indicator of food quality. Both egg production and hatching were found to be affected by the nutritional quality of the food. Hatching was also highly dependent on female fertility. External effects were tested by exposing eggs to diatom extracts. Negative effects were only evident at high extract concentrations, but disappeared when aeration was supplied to the solution. Oxygen measurements showed that failure to hatch was due to hypoxia in the extracts. No inhibitory or toxic effects of diatom cell components on hatching could be found.     

Photocatalytic degradation of volatile organic compounds at the gas-solid interface of a TiO2 photocatalyst

In the present work, photocatalytic degradation of volatile organic compounds including gas-phase trichloroethylene (TCE), acetone, methanol and toluene over illuminated TiO2 was closely examined in a batch photoreactor as a function of water vapor, molecular oxygen and reaction temperature. Water vapor enhanced the photocatalytic degradation rate of toluene, but was inhibitive for acetone, and, there was an optimum water vapor concentration in the TCE and methanol removal. In a nitrogen atmosphere, it showed lower photocatalytic degradation rate than in air and pure oxygen. Thus, it could be concluded that oxygen is an essential component in photocatalytic reactions by trapping photogenerated electrons on the semiconductor surface and by decreasing the recombination of electrons and holes. As for the influence of reaction temperature, it was found that photocatalytic degradation was more effective at a moderate temperature than at an elevated temperature for each compound.     

A Preliminary Study on Soil–Gas Radon Geochemistry According to Different Bedrock Geology in Korea

Three study areas of Kwanak campus (Seoul National University), Boeun (Choongbuk) and Gapyung (Kyonggi) were selected and classified according to their bedrock types in order to investigate soil–gas radon concentrations. The mean values of radon concentrations decreased in the order of Gapyung (40BqL^–1) > Kwanak campus (30BqL^–1) > Boeun (22BqL^–1), and decreased in the order of granite gneiss > banded gneiss > granite > black slate–shale > mica schist > shale–limestone > phyllite schist according to bed rock types. Variation in radon emanation with water content in soils and with soil grain size was assessed by the modified Morse (1976) 3min method. Soil–gas radon concentrations increased with increasing water content in the range of less than about 6–16wt.%, but decreased above 6–16wt.%. Radon concentrations also increased with decreasing soil grain size. Radioactivity analysis of radionuclides of ²³⁸U series in some soil samples indicated their possible radioactive disequilibrium between ²²⁶Ra and ²³⁸U due to the differing geochemical behaviour of intermediate radionuclides. Thus, a radioactive isotope geochemical approach should be necessary for soil–gas radon study.     

Practical field application of a novel BOD monitoring system

A biochemical oxygen demand (BOD) monitoring system, based on electrochemically-active bacteria in combination with a microbial fuel cell, has been developed for the purpose of on-site, on-line and real-time monitoring of practical wastewater. A microbial fuel cell that had been enriched with electrochemically-active bacteria was used as the basis of the measurement system. When synthetic wastewater was fed to the system, the current generation pattern and its Coulombic yield were found to be dependent on the BOD5 of the synthetic wastewater. A linear correlation between the Coulombic yields and the BOD5 of the synthetic wastewater were established. Real wastewater obtained from a sewage treatment plant also produced a highly linear correlation between the Coulombic yield and BOD5 in the system. To examine on-site, on-line and real-time monitoring capability, the BOD monitoring system was installed at a sewage treatment plant. Over 60 days, the measurement system was successfully operated with high accuracy and good stability with the measuring period for a sample being 45 min. This application showed that the application of the measurement system was a rapid and practical way for the determination of BOD5 in water industries.     

Enhanced photocatalytic degradation of lindane using metal–semiconductor Zn@ZnO and ZnO/Ag nanostructures

To achieve enhanced photocatalytic activity for the degradation of lindane, we prepared metal–semiconductor composite nanoparticles (NPs). Zn@ZnO core–shell (CS) nanocomposites, calcined ZnO, and Ag-doped ZnO (ZnO/Ag) nanostructures were prepared using pulsed laser ablation in liquid, calcination, and photodeposition methods, respectively, without using surfactants or catalysts. The as-prepared catalysts were characterized by using X-ray diffraction (XRD), field-emission scanning electron microscopy, high-resolution transmission electron microscopy, ultraviolet–visible (UV–vis) spectroscopy, and photoluminescence spectroscopy. In addition, elemental analysis was performed by energy dispersive X-ray spectroscopy. The obtained XRD and morphology results indicated good dispersion of Zn and Ag NPs on the surface of the ZnO nanostructures. Investigation of the photocatalytic degradation of lindane under UV–vis irradiation showed that Zn@ZnO CS nanocomposites exhibit higher photocatalytic activity than the other prepared samples. The maximum degradation rate of lindane was 99.5% in 40 min using Zn@ZnO CS nanocomposites. The radical trapping experiments verified that the hydroxyl radical (·OH) was the main reactive species for the degradation of lindane.     

A biological approach in the treatment of TNT wastewater

A mixed microbial population in digested sewage culture under strict anaerobic conditions degraded TNT (2,4,6‐trinitrotoluene) effectively. An initial concentration of 110 mg/L of TNT was reduced to a non‐detectable amount (> 99% removal) in 6 days of incubation. Red color due to the electron charge of NO₂ groups becomes colorless after 6 days of incubation, while the autoclave control remained red in color. Further stepwise deamination and subsequent mineralization by ring cleavage occurred by mixed nitroreductase which is available from many of the denitrifying bacteria predominantly in sewage culture.     

Mitigating flood risk and enhancing community resilience to natural disasters: plan quality matters

In response to increasingly frequent and severe flooding events, tracking the explanatory elements of integrative planning effort can provide useful assessment of initiatives that foster improved community disaster resiliency. In this research, we address the effect of local hazard mitigation plan quality on mitigating disaster risk with an emphasis on the relationship between plan quality and community resilience. Using content analysis and principles of plan quality metrics, we evaluate local hazard mitigation plans to determine how well they support disaster risk reduction. Analytically, these metrics and relevant controls were incorporated into both a log-linear two-stage least squares model and a quantile regression model to explain flood loss at the county level for the US Mississippi River Basin. Findings suggest that better plan quality and high levels of community resilience result in reducing disaster losses.     

Assessment of natural and calcined starfish for the amelioration of acidic soil

Quality improvement of acidic soil (with an initial pH of approximately 4.5) with respect to soil pH, exchangeable cations, organic matter content, and maize growth was attempted using natural (NSF) and calcined starfish (CSF). Acidic soil was amended with NSF and CSF in the range of 1 to 10 wt.% to improve soil pH, organic matter content, and exchangeable cations. Following the treatment, the soil pH was monitored for periods up to 3 months. The exchangeable cations were measured after 1 month of curing. After a curing period of 1 month, the maize growth experiment was performed with selected treated samples to evaluate the effectiveness of the treatment. The results show that 1 wt.% of NSF and CSF (700 and 900 °C) were required to increase the soil pH to a value higher than 7. In the case of CSF (900 °C), 1 wt.% was sufficient to increase the soil pH value to 9 due to the strong alkalinity in the treatment. No significant changes in soil pHs were observed after 7 days of curing and up to 3 months of curing. Upon treatment, the cation exchange capacity values significantly increased as compared to the untreated samples. The organic content of the samples increased upon NSF treatment, but it remains virtually unchanged upon CSF treatment. Maize growth was greater in the treated samples rather than the untreated samples, except for the samples treated with 1 and 3 wt.% CSF (900 °C), where maize growth was limited due to strong alkalinity. This indicates that the amelioration of acidic soil using natural and calcined starfish is beneficial for plant growth as long as the application rate does not produce alkaline conditions outside the optimal pH range for maize growth.     

Influence of pleat geometry on filter cleaning in PTFE/glass composite filter

A pleated filter bag is often used to treat exhaust gas in many industrial applications, due to its fairly high dust collection efficiency and relatively low pressure drop. This work deals with the optimum pleating geometries of a pleated filter made with a newly developed PTFE/glass composite filter. It was found that pleating geometries, including pleat height and pleat pitch, directly affect the cleaning efficiency. The design index, α, which stands for the ratio of pleat height to pleat pitch, is 1.48 for optimum operation. When the α value was higher than 1.48, the pressure drop across the pleated filter medium increased, resulting in a decreased cleaning interval due to the difficulty of filter cleaning. Therefore, it is necessary that the optimum pleating geometry should be determined by employing the dimensionless parameter, α, in the design of cartridge filters.

Implications: A pleated filter bag is often used to treat exhaust gas in many industrial applications due to its fairly high dust collection efficiency and relatively low pressure drop. The present paper introduces an optimum design configuration to make a pleated filter with newly developed PTFE/glass composite filter media. A dimensionless parameter that is the ratio of pleat height to pleat pitch should be considered to make the best quality pleated filter.