ARE RURAL RESIDENTS WILLING TO PAY ENOUGH TO IMPROVE DRINKING WATER QUALITY?1

ABSTRACT: The concentrations of iron and sulfate in community water supplies are a concern for a number of areas in southwestern Minnesota. This study used the contingent valuation method to determine how much consumers would be willing to pay to improve their drinking water quality. On average, individuals were willing to pay US$5.25 per month (in 1995 U.S. dollars) to reduce the level of iron and US$4.33 per month to reduce the level of sulfate in their water to the USEPA's secondary standards for drinking water quality. Respondents with negative perceptions of their drinking water quality were willing to pay more to improve water quality. The aggregate annual willingness to pay (WTP) for all consumers in community water systems in southwestern Minnesota that were out of compliance with water quality standards were estimated to be US$2.4 million and US$2.0 million (in 1995 dollars) for reducing the levels of iron and sulfate, respectively. Yet the total WTP of consumers who use small community water systems may not be enough to pay the full cost of providing improved water in those systems. Economies of scale in water treatment and difficulties in financing improvements mean that technical innovation, government assistance, or institutional changes may be needed to improve water quality in these areas.     

Characterization of pore scale NAPL morphology in homogeneous sands as a function of grain size and NAPL dissolution

In this study, we investigate pore scale morphology of nonaqueous phase liquids (NAPLs) trapped in different pore sizes using tracer techniques. Specific interfacial area and saturation of NAPL trapped in homogeneous sands were measured using the interfacial and partitioning tracer techniques. The observed NAPL-water interfacial areas increased in a log-linear fashion with decreasing sand grain size, but showed no clear trend with residual NAPL saturation formed in the various grain sizes. The measured values were used to calculate the NAPL morphology index, which characterizes the spatial NAPL distribution within the pore space. The NAPL morphology indices, increased exponentially with decreasing grain size, indicating that the NAPL becomes smaller, but more blobs. For a fixed grain size, the specific interfacial area and saturation of the NAPL were measured following changes caused by dissolution using alcohol. The observed interfacial areas showed a decrease linearly as a function of the NAPL saturation.     

Synthesis of Harvard Environmental Protection Agency (EPA) Center studies on traffic-related particulate pollution and cardiovascular outcomes in the Greater Boston Area

The association between particulate pollution and cardiovascular morbidity and mortality is well established. While the cardiovascular effects of nationally regulated criteria pollutants (e.g., fine particulate matter [PM_2.5] and nitrogen dioxide) have been well documented, there are fewer studies on particulate pollutants that are more specific for traffic, such as black carbon (BC) and particle number (PN). In this paper, we synthesized studies conducted in the Greater Boston Area on cardiovascular health effects of traffic exposure, specifically defined by BC or PN exposure or proximity to major roadways. Large cohort studies demonstrate that exposure to traffic-related particles adversely affect cardiac autonomic function, increase systemic cytokine-mediated inflammation and pro-thrombotic activity, and elevate the risk of hypertension and ischemic stroke. Key patterns emerged when directly comparing studies with overlapping exposure metrics and population cohorts. Most notably, cardiovascular risk estimates of PN and BC exposures were larger in magnitude or more often statistically significant compared to those of PM_2.5 exposures. Across multiple exposure metrics (e.g., short-term vs. long-term; observed vs. modeled) and different population cohorts (e.g., elderly, individuals with co-morbidities, young healthy individuals), there is compelling evidence that BC and PN represent traffic-related particles that are especially harmful to cardiovascular health. Further research is needed to validate these findings in other geographic locations, characterize exposure errors associated with using monitored and modeled traffic pollutant levels, and elucidate pathophysiological mechanisms underlying the cardiovascular effects of traffic-related particulate pollutants.

Implications: Traffic emissions are an important source of particles harmful to cardiovascular health. Traffic-related particles, specifically BC and PN, adversely affect cardiac autonomic function, increase systemic inflammation and thrombotic activity, elevate BP, and increase the risk of ischemic stroke. There is evidence that BC and PN are associated with greater cardiovascular risk compared to PM_2.5. Further research is needed to elucidate other health effects of traffic-related particles and assess the feasibility of regulating BC and PN or their regional and local sources.     

Anaerobic degradation of pyrrolidine and piperidine coupled with nitrate reduction

Biodegradability of secondary amines (pyrrolidine, piperidine, piperazine, morpholine, and thiomorpholine) under anaerobic conditions was examined in microbial consortia from six different environmental sites. The consortia degraded pyrrolidine and piperidine under denitrifying conditions. Enrichment cultures were established by repeatedly sub-culturing the consortia on pyrrolidine or piperidine in the presence of nitrate. The enrichments strictly required nitrate for the anaerobic degradation and utilized pyrrolidine or piperidine as a carbon, nitrogen, and energy source for their anaerobic growths. The anaerobic degradation of pyrrolidine and piperidine reduced nitrate to nitrogen gas, indicating that these anaerobic degradations were coupled with a respiratory nitrate reduction.     

Performance of the Button Personal Inhalable Sampler for the measurement of outdoor aeroallergens

No personal aerosol sampler has been evaluated for monitoring aeroallergens in outdoor field conditions and compared to conventional stationary aerobiological samplers. Recently developed Button Personal Inhalable Aerosol Sampler has demonstrated high sampling efficiency for non-biological particles and low sensitivity to the wind direction and velocity. The aim of the present study was to evaluate the Button Sampler for the measurement of outdoor pollen grains and fungal spores side-by-side with the widely used Rotorod Sampler. The sampling was performed for 8 months (spring, summer and fall) at a monitoring station on the roof of a two-storied office building located in the center of the city of Cincinnati. Two identical Button Samplers, one oriented towards the most prevalent wind and the other towards the opposite wind and a Rotorod Sampler were placed side-by-side. The total fungal spore concentration ranged from 129 to 12,980 spores m(-3) (number per cubic meter of air) and the total pollen concentration from 4 to 4536 pollen m(-3). The fungal spore concentrations obtained with the two Button Samplers correlated well (r = 0.95; p<0.0001). The pollen data also showed positive correlation. These findings strongly support the results of earlier studies conducted with non-biological aerosol particles, which demonstrated a low wind dependence of the performance of the Button Sampler compared to other samplers. The Button Sampler's inlet efficiency was found to be more dependent on wind direction when sampling larger sized Pinaceae pollen grains (aerodynamic diameter approximately 65 mum). Compared to Rotorod, both Button Samplers measured significantly higher total fungal spore concentrations. For total pollen count, the Button Sampler facing the prevalent wind showed concentrations levels comparable to that of the Rotorod, but the Button Sampler oriented opposite to the prevalent wind demonstrated lower concentration levels. Overall, it was concluded that the Button Sampler is efficient for the personal sampling of outdoor aeroallergens, and is especially beneficial for aeroallergens of small particle size.     

Levels of PCDDs and PCDFs in Korean river sediments and their detection by biomarkers

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are a group of toxic halogenated aryl hydrocarbons inducing various physiological disorders against biological organisms. Here, we investigated their levels in sediment samples taken from 12 different rivers in Korea. The levels of PCDD/PCDFs in sediment samples were expressed as concentrations and international TEQ values. Among 17 PCDD/PCDFs selected as target compounds in this study, the 1,2,3,4,7,8-HxCDD and OCDD were found in all river sediments with significant variation in various congener profiles of PCDD/PCDFs in sediments. PCDD/PCDFs could be monitored by sensitive biomarkers using insect immune system. Out of 12 river sediment samples, the biomarkers reported four spots (up, middle, and down Singil sites and Ansan) as putative contamination areas. When comparing both chemical and biological monitoring results, two methods agreed three spots of Singil as contamination areas (above 10ppt levels) as well as six river sediment samples as relatively less-contaminated areas, but differed in the results in Ansan and Miho, probably due to relative non-specificity of biomarkers. Despite some disparity between bio- and chemical monitoring results, the biomarkers can be recommended as a device warning the contamination of dioxins in the environment because of a fast and inexpensive detection method.     

Absorption characteristics of new solvent based on a blend of AMP and 1,8-diamino-p-menthane for CO2 absorption

Aqueous 1,8-diamino-p-menthane (KIER-C3) and commercially available amine solutions were tested for CO₂ absorption. A 2-amino- 2-methyl-1-propanol (AMP) solution with an addition of KIER-C3 showed 9.3% and 31.6% higher absorption rate for CO₂ than the AMP solution with an addition of monoethanolamine (MEA) and ammonia (NH₃), respectively. The reaction rate constant for CO₂ absorption by the AMP/KIER-C3 solution was determined by the following equation: k_2,AMP/C3 = 7.702×10⁶ exp (-2248.03/T). A CO₂ loading ratio of the AMP/KIER-C3 solution was also 2 and 3.4-times higher than that of the AMP/NH3 solution and the AMP/MEA solution, respectively. Based on the experimental results, KIER-C3 may be used as an excellent additive to increase CO₂ absorption capability of AMP.     

Sensitivity of veliger larvae of Mytilus edulis and mussel of various sizes to chlorination

The blue mussel Mytilus edulis is one of the dominant fouling organisms in cooling water systems. In this work, how veliger larvae and different size groups of the mussels responded against chlorine dosage was examined. Veliger larvae mortality was studied at different residual chlorine concentrations (0.05–0.5 mg L^?1), and it was found that a chlorine dose of 0.5 mg L^?1 is 4 times as effective as 0.05 mg L^?1 and twice as effective as 0.1 mg L^?1. Mortality of 100% for three size groups (1.4, 14, and 25 mm) and relative physiological activities of two size groups (14 and 25 mm) were observed. The exposure duration for 100% mortality of mussels decreased with the increasing residual chlorine concentration (0.1–4.0 mg L^?1). Mussel size was also found to be an important factor, considering that the continuation times for mussel mortality were 28 h for the 1.4 mm and 410 h for the 25 mm size groups. All size groups showed progressive reduction in physiological activities, such as oxygen consumption, foot activity, and byssus thread production with increasing chlorine dose (0.05–1.0 mg L^?1); the two data-sets were strongly correlated with each other. The results of this study should be of significance for optimizing the chlorine content, and minimize the environmental threat to industries where mussels are the dominant fouling organisms.     

Influence of haze pollution on water-soluble chemical species in PM2.5 and size-resolved particles at an urban site during fall

To investigate the influence of haze on the chemical composition and formation processes of ambient aerosol particles,PM_(2.5) and size-segregated aerosol particles were collected daily during fall at an urban site of Gwangju,Korea.During the study period,the total concentration of secondary ionic species(SIS) contributed an average of 43.9% to the PM_(2.5) ,whereas the contribution of SIS to the PM_(2.5) during the haze period was 62.3%.The NO_3 and SO~(2-)_4 concentrations in PM_(2.5) during the haze period were highly elevated,being 13.4 and 5.0 times higher than those during non-haze period,respectively.The PM,NO~-_3,SO~(2-)_4,oxalate,water-soluble organic carbon(WSOC),and humic-like substances(HULIS) had tri-modal size distributions peaks at 0.32,1.0,and 5.2 μm during the non-haze and haze periods.However,during the non-haze period they exhibited dominant size distributions at the condensation mode peaking at 0.32 μm,while on October 21 when the heaviest haze event occurred,they had predominant droplet mode size distributions peaking at 1.00 μm.Moreover,strong correlations of WSOC and HULIS with SO~(2-)_4,oxalate,and K+at particle sizes of 1.8 μm indicate that secondary processes and emissions from biomass burning could be responsible for WSOC and HULIS formations.It was found that the factors affecting haze formation could be the local stable synoptic conditions,including the weak surface winds and high surface pressures,the long-range transportation of haze from eastern China and upwind regions of the Korean peninsula,as well as the locally emitted and produced aerosol particles.