Improvement of DOC removal by multi-stage AOP-biological treatment

The single and multi-stages advanced oxidation process (AOP)-biological treatments were evaluated to apply for drinking water treatment, especially for the water containing less susceptible dissolved organic carbon (DOC) to ozone, comparing with the ozonation-biological treatment. Minaga reservoir water and the secondary effluent from a Municipal wastewater treatment plant were used as dissolved organic matter (DOM) solutions. DOC removals after 60 min AOP-biological treatment were 62% and 41% in the Minaga reservoir water and the secondary effluent, respectively, whereas those in the ozonation-biological treatment only 40% and 15% of DOC were removed, respectively. The result indicated that the single-stage AOP-biological treatment could improve DOC removal in comparison with the single-stage ozonation-biological treatment. This is because the AOP mineralized both biodegradable dissolved organic carbon (BDOC) produced in the early stage of oxidation and non-biodegradable dissolved organic carbon (NBDOC), whereas only BDOC was mineralized by further ozonation and NBDOC was not oxidized in the ozonation-biological treatment. The multi-stage treatment could not improve DOC removal in comparison with the single-stage treatment in the ozonation-biological treatment for the secondary effluent containing less susceptible DOC to ozone. However, the multi-stage AOP-biological treatment significantly reduced DOC and achieved 71% of DOC removal by 4 times repetition of 15 min oxidation, whereas DOC removal was 41% in the single-stage AOP-biological treatment for the same oxidation time. The improvement of DOC removal by the multi-stage AOP-biological treatment was due to BDOC removal as a radical scavenger by subsequent biological treatment in the early stage of oxidation and direct mineralization in the latter stage of oxidation.     

Interspecific mating of the introduced bumblebee <Emphasis Type="Italic">Bombus terrestris</Emphasis> and the native Japanese bumblebee <Emphasis Type="Italic">Bombus hypocrita sapporoensis</Emphasis> results in inviable hybrids

The bumblebee Bombus terrestris is not only an effective pollinator, but also a potential invasive alien species outside its native range. Recently, nearly 30% of queens of the Japanese native species Bombus hypocrita sapporoensis and B. hypocrita hypocrita were estimated to copulate with B. terrestris males in the field, suggesting that indigenous bumblebees could be genetically deteriorated through hybrid production with the introduced species. In this study, we evaluated hybrid production between the introduced B. terrestris and the indigenous B. hypocrita sapporoensis under laboratory conditions. The hatching rate of eggs derived from interspecific matings was 0% and 8.6% depending on the direction of the cross, which was significantly lower than that from intraspecific matings of B. terrestris (76.9%) and B. hypocrita sapporoensis (78.9%). Genetic studies using microsatellite markers revealed that both haploid and diploid individuals were present in the egg stage, whereas all hatched larvae were haploid. In addition, histological studies revealed that eggs derived from interspecific matings terminated development 2 days after oviposition. These results strongly suggested that eggs derived from interspecific matings are inviable due to post-mating isolation mechanisms. Mass release of exotic pollinators could cause serious population declines of native bumblebee species.     

Validation of modeling approach to evaluate congener-specific concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans in air and soil near a solid waste incinerator.

A concise modeling approach using long-term averaged meteorological data was developed to estimate site-specific concentrations of congeners of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) near a solid waste incinerator. This approach consists of calculation of atmospheric dispersion, dry and wet deposition of gaseous and particle-bound congeners, and non-steady-state concentrations in soil. The predictability of this approach was evaluated by comparison of calculated concentrations of congeners in soil with those measured at eight locations near a municipal solid waste incinerator (MSWI). The variation of these concentrations due to variability of meteorological parameters is small. A considerable number of mean values show good agreement with measured concentrations within a factor of three. The reasonable agreement between calculated and measured concentrations indicates that algorithms for the calculation of vapor-phase deposition and non-steady-state concentrations in soil must be included in the modeling approach for an accurate estimation of the concentrations of congeners of PCDD/Fs emitted from MSWIs to the atmosphere. For a detailed estimation of site-specific concentrations, it is important to specify the bulk density of soil in the evaluated area, together with meteorological parameters.     

Photodegradation of gaseous acetaldehyde and methylene blue in aqueous solution with titanium dioxide-loaded activated carbon fiber polymer materials and aquatic plant ecotoxicity tests

TiO₂-supported activated carbon felts (TiO₂–ACFTs) were prepared by dip coating of felts composed of activated carbon fibers (ACFs) with either polyester fibers (PS-A20) and/or a polyethylene pulp (PE-W15) in a TiO₂ aqueous suspension followed by calcination at 250 °C for 1 h. The as-prepared TiO₂–ACFTs with 29–35 wt.% TiO₂ were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and N₂ adsorption. The TiO₂–ACFT(PS-A20) samples with 0 and 29 wt.% TiO₂ were microporous with specific surface areas (S _BET) of 996 and 738 m²/g, respectively, whereas the TiO₂–ACFT(PE-W15) samples with 0 and 35 wt.% TiO₂ were mesoporous with S _BET of 826 and 586 m²/g, respectively. Adsorption and photocatalytic activity of the as-prepared samples were evaluated by measuring adsorption in the dark and photodegradation of gaseous acetaldehyde (AcH) and methylene blue (MB) in aqueous solution under UV light. The TiO₂ loading caused a considerable decrease in the S _BET and MB adsorption capacity along with an increase in MB photodegradation and AcH mineralization. Lemna minor was chosen as a representative aquatic plant for ecotoxicity tests measuring detoxification of water obtained from the MB photodegradation reaction with the TiO₂–ACFT samples under UV light.     

Recovery of zinc and lead from fly ash from ash-melting and gasification-melting processes of MSW--comparison and applicability of chemical leaching methods

Fly ash generated from MSW ash-melting and gasification-melting plants, known as Melting Furnace Fly Ash (MFA), contains considerable amounts of heavy metals such as Pb and Zn. These metals can be recovered using a smelting furnace after "pre-treatment" for removal of unnecessary elements such as Cl, Sn and Si. Chemical methods have been studied for pretreatment in the past. However, they have been discussed only with regard to treatment cost and the concentration of Pb and Zn recovered, but neither applicability to various types of MFA nor the environmental impact have been considered. In this study, acid, alkaline and ammonia/chloride leaching methods were compared from the standpoints of: (1) applicability to MFA, (2) concentration of Pb and Zn recovered, (3) treatment cost, and (4) environmental impact. Twenty-three samples of MFAs were collected and classified into 4 types based on element contents. A Pb and Zn recovery experiment was conducted for the representative MFA of those types. The results showed: (1) MFA from gasification-melting plants cannot be treated by chemical methods; (2) the other MFA can be treated to an acceptable quality by existing smelting furnaces; (3) only MFA from electric resistance ash-melting plants can be treated easily by the water washing method; and (4) alkaline and ammonia/chloride leaching methods were more effective than acid leaching.     

Decomposition of trichloroethylene and 2,4-dichlorophenol by ozonation in several organic solvents

The effects of chemical characteristics of organic solvents on the decomposition rate constants of undissociative trichloroethylene (TCE) and dissociative 2,4-dichlorophenol (2,4-DCP) by ozonation were studied. The TCE and 2,4-DCP decomposition by ozonation in organic solvents followed to the first-order reaction kinetics with respect to TCE or 2,4-DCP concentration. The orders of the rate constants among organic solvents for undissociative TCE and dissociative 2,4-DCP were different indicating that the ozonation rates for undissociative and dissociative compounds were dependent on the chemical property of organic solvent. The decomposition of undissociative TCE by ozonation was a simple electrophilic reaction, which was dependent on acceptor number (AN) of the solvent. On the other hand, the decomposition of dissociative 2,4-DCP was dependent on by the dissociation of the compounds and would be dependent on donor number (DN) of the solvent. Finally, TCE in acetic acid was transformed to chlorinated intermediates and chloride ion and then these intermediates were continuously oxidized to chlorine gas.     

Comparison of chorionic villus sampling and amniocentesis: Current status of prenatal diagnosis in Japan

Data were tabulated and compared for cases involving prenatal diagnostic procedures performed in the 8 years between January 1985 and December 1992. Of a total of 2781 pregnancies, 2546 cases (91·5 per cent) were diagnosed by amniocentesis, and 235 (8·5 per cent) by chorionic villus sampling (CVS). These findings reflect the fact that amniocentesis has taken deep root as the prenatal diagnostic procedure widely acknowledged by society, whereas even the existence of CVS has yet to be generally recognized. Analysis of our clinical and laboratory results and complication rates, however, suggests that CVS is a safe and accurate alternative to amniocentesis which should and can be positively presented to all patients who are candidates for prenatal diagnosis.     

Feasibility study of the separation of chlorinated films from plastic packaging wastes

This study describes the possible separation of chlorinated plastic films (PVC and PVDC) from other heavy plastic packaging waste (PPW) by selective twist formation and gravity separation. Twists formation was mechanically induced in chlorinated plastic films, whereas twist formation did not occur in PS and PET films. After twist formation, all the films had the apparent density of less than 1.0 g/cm³ and floated in water even though the true density was more than 1.0 g/cm³. However, the apparent density of the PS and the PET films increased with agitation to more than 1.0 g/cm³, whereas that of chlorinated plastic films was kept less than 1.0 g/cm³. The main reason would be the air being held inside the chlorinated plastic films which was difficult to be removed by agitation. Simple gravity separation after twist formation was applied for artificial film with 10 wt.% of the chlorinated films and real PPW films with 9 wt.% of the chlorinated films. About 76 wt.% of the artificial PPW films and 75 wt.% of real PPW films after the removal of PP and PE were recovered as settling fraction with 4.7 wt.% and 3.0 wt.% of chlorinated plastic films, respectively. These results indicate that simple gravity separation process after twist formation can be used to reduce the chlorinated plastic concentration from mixed heavy PPW films.     

Release of phosphorus from lake sediments

The relationship between the content of various forms of phosphorus in lakesediments and the amount of phosphorus released under aerobic and anaerobic conditions was studied. Total phosphorus content in the sediment of Lake Kasumigaura was highest at the 0–5 cm surface layer and decreased with depth. The constant value below 15 cm was consistent with the decrease of iron-bound phosphorus conent (FeP). The amount of phosphorus released from the sediments was proportional to the decrease of FeP under both aerobic and anaerobic conditions. Under anaerobic conditions, 90% of the FeP initially held in the sediments was released in 55 days. Using dialysis apparatus, maximum growth yield of algae was shown to be linearly dependent on the amount of phosphorus released under aerobic conditions.