Effect of grinding and heating on Ni2+ uptake properties of waste paper sludge

Uptake properties of Ni2+ were examined for unmilled and milled paper sludge calcined at various temperatures to develop a new usage of waste paper sludge. Since paper sludge mainly consists of cellulose ([C6H(10)O5]n) fibers, calcite (CaCO3), kaolinite (Al2Si2O5(OH)4) and talc (Mg3Si(4)O(10)(OH)2), amorphous and crystalline CaO(MgO)-Al(2)O(3)-SiO(2) compounds are formed by calcining paper sludge. Wet and dry milling treatments were performed to accelerate solid-state reaction to form the above mentioned target compounds. The crystalline phases originally present decompose at increasing calcining temperature (up to 800 degrees C) in the order cellulose 相似文献   

Evaluation of aquatic environmental fate of 2,4,6-trichlorophenol with a mathematical model

A mathematical model, Simplified Approach for Fate Evaluation of Chemicals in Aquatic Systems (SAFECAS), was applied to evaluate fate of 2,4,6-trichlorophenol(TCP) in three types of aquatic environments; a river, an oligotrophic lake, and an eutrophic lake.Since phenols are dissociative substances, equilibrium constants and rate constants for transfer and transformation processes were measured or estimated as a function of pH.Results suggest that most of TCP is distributed to the water phase in aquatic environments, and is almost removed by the advective outflow in the river and by the photodegradation in lakes.     

Reduction–melting combined with a Na2CO3 flux recycling process for lead recovery from cathode ray tube funnel glass

With large quantity of flux (Na₂CO₃), lead can be recovered from the funnel glass of waste cathode-ray tubes via reduction–melting at 1000 °C. To reduce flux cost, a technique to recover added flux from the generated oxide phase is also important in order to recycle the flux recovered from the reduction–melting process. In this study, the phase separation of sodium and the crystallization of water-soluble sodium silicates were induced after the reduction–melting process to enhance the leachability of sodium in the oxide phase and to extract the sodium from the phase for the recovery of Na₂CO₃ as flux. A reductive atmosphere promoted the phase separation and crystallization, and the leachability of sodium from the oxide phase was enhanced. The optimum temperature and treatment time for increasing the leachability were 700 °C and 2 h, respectively. After treatment, more than 90% of the sodium in the oxide phase was extracted in water. NaHCO₃ can be recovered by carbonization of the solution containing sodium ions using carbon dioxide gas, decomposed to Na₂CO₃ at 50 °C and recycled for use in the reduction–melting process.     

Designing new institutions for implementing integrated disaster risk management: key elements and future directions

The goal of integrated disaster risk management is to promote an overall improvement in the quality of safety and security in a region, city or community at disaster risk. This paper presents the case for a thorough overhaul of the institutional component of integrated disaster risk management. A review of disaster management institutions in the United States indicates significant weaknesses in their ability to contribute effectively to the implementation of integrated disaster risk management. Our analysis and findings identify eight key elements for the design of dynamic new disaster management institutions. Six specific approaches are suggested for incorporating the identified key elements in building new institutions that would have significant potential for enhancing the effective implementation of integrated disaster risk management. We have developed a possible blueprint for effective design and construction of efficient, sustainable and functional disaster management institutions.     

基于营养系统的灾害避难所规划的概念模型

通过对比中、日、美3国的灾害避难所及其规划设计指导手册,总结了灾害避难所的基本类型和避难所规划的空间尺度(范围).从营养系统的角度给出了避难所规划的3个大类及8个实施标准,并以此为基础,提出了灾害避难所规划或评价的3个基本模式.     

State of mixture of atmospheric submicrometer black carbon particles and its effect on particulate light absorption

The state of mixture of light-absorbing carbonaceous particles was investigated in relation to light absorption properties using electron microscopic examinations, black carbon (BC) analyses of quartz filter by thermal/optical reflectance (TOR) method, measurements with two continuous light-absorbing photometers at a suburban site of Tsukuba, about 60 km northeast of Tokyo. The volume fraction of water-soluble material (?) in individual particles is important for assessing particulate light-absorbing and/or scattering of atmospheric aerosols. The values of ? in BC particles were evaluated by electron micrographs before and after dialysis (extraction) of water-soluble material. The mass absorption coefficient (MAC in units of m² g^?1) tended to increase with increasing the average ? in BC particles with the radius range of 0.05–0.5 μm. Thus, our results indicate that coatings of water-soluble material around BC particles can enhance the absorption of solar radiation. Moreover, the single scattering albedo (SSA) will increase because a large amount of coating material will scatter more light.     

Adsorption capacity of powdered activated carbon for 3,5-dichlorophenol in activated sludge

The objectives of this study were to evaluate the performance of powdered activated carbon treatment (PACT) process based on the adsorption capacity of powdered activated carbon (PAC) in activated sludge and the effect of dissolved organic substances in activated sludge on the adsorption capacity of PAC. The DCP adsorption capacity of three PACs originated from different raw materials (coal, soft coal and sawdust) in activated sludge were 29%, 34% and 17% of that of new PAC, respectively. The performance of PACT process for shock loading of 3,5-dichlorophenol (3,5-DCP) was different among PACs in spite of the same adsorption capacity in new PAC. The performance of PACT process for removal of DCP is dependent not on the adsorption capacity of new PAC but on the adsorption capacity of PAC in the aeration tank. Dissolved organic matter (DOM) with molecular weight smaller than 50kDa did not affect the adsorption capacity of PAC for 3,5-DCP in the activated sludge reactor. DOM with molecular weight larger than 50kDa and biofilm developed on the surface of PAC seemed to be responsible for the decreased adsorption capacity of PAC for the DCP.     

Energy-efficient modification of reduction-melting for lead recovery from cathode ray tube funnel glass

Lead can be recovered from funnel glass of waste cathode ray tubes via reduction melting. While low-temperature melting is necessary for reduced energy consumption, previously proposed methods required high melting temperatures (1400 °C) for the reduction melting. In this study, the reduction melting of the funnel glass was performed at 900–1000 °C using a lab-scale reactor with varying concentrations of Na₂CO₃ at different melting temperatures and melting times. The optimum Na₂CO₃ dosage and melting temperature for efficient lead recovery was 0.5 g per 1 g of the funnel glass and 1000 °C respectively. By the reduction melting with the mentioned conditions, 92% of the lead in the funnel glass was recovered in 60 min. However, further lead recovery was difficult because the rate of the lead recovery decreased as with the recovery of increasing quantity of the lead from the glass. Thus, the lead remaining in the glass after the reduction melting was extracted with 1 M HCl, and the lead recovery improved to 98%.     

Multi‐phase non‐steady state equilibrium model for evaluation of environmental fate of organic chemicals

A simple mathematical fate model, Multi‐Phase Non‐Steady State Equilibrium Model (MNSEM) is proposed to evaluate distribution, persistence, and concentrations of chemicals in a model environment consisting of air, water, soil and sediment phases. The model is applied to evaluation of environmental fate and concentration of trichloroethylene and 1,4‐dichlorobenzene under generic conditions representative of Japan.

Evaluated chemical concentrations in air are within a factor of 3 of average values in Japanese atmosphere, and evaluated concentrations in water, sediment, or fish are greater than an order of magnitude below detection limits in real environments, so that evaluated concentrations are in reasonable agreement with environmental measurement data in Japan.

Although MNSEM is not a model for site‐specific evaluation of environmental fate, results suggested that this model is an adequate method to aid in evaluation of fate of chemicals under generic environment conditions. Evaluated concentration‐profiles may be used to estimate average chemical exposure concentrations for humans and the environment.