Composting of food refuse from a student restaurant in Hokkaido University

Over a period of 21 months, we composted food refuse from a student restaurant in Hokkaido University using a commercially available composting machine. The machine had two reactors, each with a working volume of 250 l. The refuse was mixed with sawdust in a ratio of 5 l sawdust to 10 kg refuse, and this mixture was fed into the machine daily. We studied the characteristics of the refuse, the composting mixture, and the finished compost in an effort to optimize the operating parameters. We also evaluated the effectiveness of the composting process by determining the decomposition rates of the composting materials. The optimum moisture content of the composting mixture was between 30% wet basis (wb) and 40% wb in this machine. The composting machine worked well when the first reactor was filled with composting mixture and 0.5 kg lime was added once per week. The mass of the materials supplied was reduced by 84% over the study period. The decomposition rate of the volatile matter in all composting materials was 66%. The mass of the food refuse supplied was 14.8 kg/day on average, and the moisture content of the refuse was 77% wb on average. Received: October 4, 1999 / Accepted: April 4, 2000     

Difficulties in applying extended producer responsibility policies in developing countries: case studies in e-waste recycling in China and Thailand

Developing Asian countries have started to apply the principle of extended producer responsibility (EPR) to electronics and electrical equipment waste (e-waste). This policy approach aims to give electronic appliance manufacturers and importers responsibility for the collection and recycling of discarded electronic equipment. China and Thailand have drafted regulations on the recycling of e-waste with common characteristics such as the financial responsibility of producers and subsidies for collection. Although the proposed system is sensible, taking into account the fact that e-waste is a market-traded commodity, there are two major difficulties in implementing EPR in developing countries. First, it may be difficult for governments to collect funds from producers or importers if smuggled, imitation, or small shop-assembled products have a large share in the market. Second, the system creates incentives for collectors and recyclers to over-report the amount of collected e-waste in order to gain extra subsidies from the fund. Other policy measures such as the enforcement of pollution control regulations on informal recyclers, the prevention of smuggling, and the protection of intellectual property rights should accompany EPR policies.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.     

Intramolecular distribution of stable nitrogen and oxygen isotopes of nitrous oxide emitted during coal combustion

The intramolecular distribution of stable isotopes in nitrous oxide that is emitted during coal combustion was analyzed using an isotopic ratio mass spectrometer equipped with a modified ion collector system (IRMS). The coal was combusted in a test furnace fitted with a single burner and the flue gases were collected at the furnace exit following removal of SO(x), NO(x), and H2O in order to avoid the formation of artifact nitrous oxide. The nitrous oxide in the flue gases proved to be enriched in 15N relative to the fuel coal. In air-staged combustion experiments, the staged air ratio was controlled over a range of 0 (unstaged combustion), 20%, and 30%. As the staged air ratio increased, the delta15N and delta18O of the nitrous oxide in the flue gases became depleted. The central nitrogen of the nitrous oxide molecule, N(alpha), was enriched in 15N relative to that occupying the end position of the molecule, N(beta), but this preference, expressed as delta15N(alpha)-delta15N(beta), decreased with the increase in the staged air ratio. Thermal decomposition and hydrogen reduction experiments carried out using a tube reactor allowed qualitative estimates of the kinetic isotope effects that occurred during the decomposition of the nitrous oxide and quantitative estimates of the extent to which the nitrous oxide had decomposed. The site preference of nitrous oxide increased with the extent of the decomposition reactions. Assuming that no site preference exists in nitrous oxide before decomposition, the behavior of nitrous oxide in the test combustion furnace was analyzed using the Rayleigh equation based on a single distillation model. As a result, the extent of decomposition of nitrous oxide was estimated as 0.24-0.26 during the decomposition reaction governed by the thermal decomposition and as 0.35-0.38 during the decomposition reaction governed by the hydrogen reduction in staged combustion. The intramolecular distribution of nitrous oxide can be a valuable parameter to estimate the extent of decomposition reaction and to understand the reaction pathway of nitrous oxide at the high temperature.     

Multi‐phase non‐steady state equilibrium model for evaluation of environmental fate of organic chemicals

A simple mathematical fate model, Multi‐Phase Non‐Steady State Equilibrium Model (MNSEM) is proposed to evaluate distribution, persistence, and concentrations of chemicals in a model environment consisting of air, water, soil and sediment phases. The model is applied to evaluation of environmental fate and concentration of trichloroethylene and 1,4‐dichlorobenzene under generic conditions representative of Japan.

Evaluated chemical concentrations in air are within a factor of 3 of average values in Japanese atmosphere, and evaluated concentrations in water, sediment, or fish are greater than an order of magnitude below detection limits in real environments, so that evaluated concentrations are in reasonable agreement with environmental measurement data in Japan.

Although MNSEM is not a model for site‐specific evaluation of environmental fate, results suggested that this model is an adequate method to aid in evaluation of fate of chemicals under generic environment conditions. Evaluated concentration‐profiles may be used to estimate average chemical exposure concentrations for humans and the environment.     

Changes in Determinants of Deforestation and Forest Degradation in Popa Mountain Park, Central Myanmar

Implementing effective conservation requires an understanding of factors affecting deforestation and forest degradation. Previous studies have investigated factors affecting deforestation, while few studies have examined the determinants of both of deforestation and forest degradation for more than one period. To address this gap, this study examined factors influencing deforestation and forest degradation during 1989–2000 and 2000–2005 in the Popa Mountain Park, Myanmar. We applied multinomial logistic regression (MNL) using land cover maps derived from Landsat images as the dependent variables as well as spatial and biophysical factors as the independent variables. The MNL models revealed influences of the determinants on deforestation and forest degradation changes over time. For example, during 1989–2000, deforestation from closed forest was positively correlated to the distance from the park boundary and was negatively correlated with distance from villages, roads, the park circular road, slope, western aspect and elevation. On the other hand, during 2000–2005, deforestation of closed forest was positively correlated with distance from villages, roads, the park circular road, slope and western aspect, and negatively correlated with distance from the park boundary and elevation. Similar scenarios were observed for the deforestation of open forest and forest degradation of closed forest. The study also found most of the determinants influenced deforestation and forest degradation differently. The changes in determinants of deforestation and forest degradation over time might be attributable to the general decrease in resource availability and to the effect of conservation measures conducted by the park.     

Measuring marginal willingness to pay using conjoint analysis and developing benefit transfer functions in various Asian cities

We need a consistent methodology to measure the co-benefits of climate change mitigation across Asian countries. This study chose a strategy of modifying the Japan-specific life-cycle impact assessment method based on endpoint modeling (LIME) for wider application across countries. LIME has two dimensions. First, it is an environmental science that links the cause-and-effect chain. Second, it is an environmental valuation that weighs four endpoint damages in monetary terms through a conjoint analysis that is derived from an Internet-based questionnaire survey. This article describes the modification of the methodology for application of the conjoint analysis to weigh environmental impacts. We approached the investigation as follows. First, we conducted Internet surveys to measure marginal willingness-to-pay (MWTP). We used a sample of 112 respondents in their 20 s to 40 s, divided equally between men and women, in 11 cities across China, India, and Southeast Asia. The results obtained showed clear statistical significance and were comparable across the cities. Second, we attempted to develop functions (called benefit transfer functions) to simplify the measured MWTP in order to apply it across different Asian countries. The functions were derived through a stepwise meta-analytic method, a type of multiple regression analysis whose independent variable was MWTP and dependent variables were attributes of both respondents and surveyed cities. The functions showed that coal consumption and percentage of nature reserve were dependent variables. Then, the MWTPs estimated from the functions were compared with the measured MWTP for transfer error, which is calculated by the absolute value of the difference between the estimated value and the measured value divided by the latter. The transfer error was below 50% in about 90% of the 44 results (a combination of four endpoints and 11 cities), implying that the developed functions were statistically significant.     

黄淮地区冬小麦的抗晚霜冻害能力

使用人工移动霜箱,对黄淮麦区小麦霜冻害的抗冻性进行了研究。结果表明,按幼穗的冰点来判定不同品种的抗霜能力,可以将小麦的抗霜冻能力分为4个等级:-4℃以上抗性弱,-4～-5℃抗性较弱,-5～-6℃抗性较强,-6℃以下抗性强。随着生育进程的推进,小麦的冰点升高;随着茎高的增高,冰点升高,主茎和分蘖的受害率增大;随着细胞液浓度的升高,冰点降低,受害率降低。小麦在雌雄蕊末到药隔初的冰点温度较高。随着生育时期的推进,幼穗的冻死率升高,而其冻伤率降低。     

Decomposition and removal of ionic liquid in aqueous solution by hydrothermal and photocatalytic treatment

We demonstrated a complete decomposition method for ionic liquids (ILs; organic cation part: butyl-methyl or ethyl-methyl imidazolium, and inorganic anion part: PF₆ ⁻, BF₄ ⁻ or Br⁻) in aqueous media by combining a hydrothermal mineralization method with a photocatalytic decomposition (PD) method. As a result, the hydrothermal treatment with Ca(OH)₂ mineralizer could effectively remove the inorganic anion part, such as PF₆ ⁻ or BF₄ ⁻ and the PD could decompose the organic cation part effectively. Therefore, the detoxification of ILs in aqueous media was accomplished by the present method.