The value of coastal wetlands for hurricane protection

Coastal wetlands reduce the damaging effects of hurricanes on coastal communities. A regression model using 34 major US hurricanes since 1980 with the natural log of damage per unit gross domestic product in the hurricane swath as the dependent variable and the natural logs of wind speed and wetland area in the swath as the independent variables was highly significant and explained 60% of the variation in relative damages. A loss of 1 ha of wetland in the model corresponded to an average USD 33,000 (median = USD 5000) increase in storm damage from specific storms. Using this relationship, and taking into account the annual probability of hits by hurricanes of varying intensities, we mapped the annual value of coastal wetlands by 1 km x 1 km pixel and by state. The annual value ranged from USD 250 to USD 51,000 ha(-1) yr(-1), with a mean of USD 8240 ha(-1) yr(-1) (median = USD 3230 ha(-1) yr(-1)) significantly larger than previous estimates. Coastal wetlands in the US were estimated to currently provide USD 23.2 billion yr(-1) in storm protection services. Coastal wetlands function as valuable, selfmaintaining "horizontal levees" for storm protection, and also provide a host of other ecosystem services that vertical levees do not. Their restoration and preservation is an extremely cost-effective strategy for society.     

Sorption of nonpolar neutral organic compounds to humic acid-coated sands: contributions of organic and mineral components

The contributions of organic matter and the mineral surface to the overall sorption of six nonpolar neutral organic compounds (1,2,4-trichlorobenzene, 1,4-dichlorobenzene, chlorobenzene, m-xylene, toluene, benzene) by five humic acid (HA)-coated sands with different fractions of organic carbon (f(oc)) ranging from 0.024% to 0.154% were evaluated on the basis of measured data and four different sorption models. Sorption of all six sorbates to both uncoated and heated sands was nearly linear due to the coverage of hydrophilic mineral surface with the ordered vicinal water region. Sorption of all six sorbates to the HA-coated sands was also essentially linear, and resulted from a combination of sorption to both organic matter and the mineral surface, with the dominance of either contribution depending on the properties of the sorbents (e.g., f(oc)) and the sorbates (e.g., K(ow)). A proposed two-component model for sorption including blocking effect was appropriate for quantifying the contributions of organic matter and the mineral surface to the overall sorption. However, conventional sorption models considering the contributions of both organic matter and the mineral surface provided essentially as good agreement between predicted and measured distribution coefficients as the more complicated, two-component model for sorption that takes into account mineral surface blocking by HA.     

Generation and characterization of diesel exhaust in a facility for controlled human exposures

An idling medium-duty diesel truck operated on ultralow sulfur diesel fuel was used as an emission source to generate diesel exhaust for controlled human exposure. Repeat tests were conducted on the Federal Test Procedure using a chassis dynamometer to demonstrate the reproducibility of this vehicle as a source of diesel emissions. Exhaust was supplied to a specially constructed exposure chamber at a target concentration of 100 microg x m(-3) diesel particulate matter (DPM). Spatial variability within the chamber was negligible, whereas emission concentrations were stable, reproducible, and similar to concentrations observed on the dynamometer. Measurements of nitric oxide, nitrogen dioxide, carbon monoxide, particulate matter (PM), elemental and organic carbon, carbonyls, trace elements, and polycyclic aromatic hydrocarbons were made during exposures of both healthy and asthmatic volunteers to DPM and control conditions. The effect of the so-called "personal cloud" on total PM mass concentrations was also observed and accounted for. Conventional lung function tests in 11 volunteer subjects (7 stable asthmatic) did not demonstrate a significant change after 2-hr exposures to diesel exhaust. In summary, we demonstrated that this facility can be effectively and safely used to evaluate acute responses to diesel exhaust exposure in human volunteers.     

Using FTIR to corroborate the identity of functional groups involved in the binding of Cd and Cr to saltbush (Atriplex canescens) biomass

Fourier transform infrared (FTIR) studies were performed to confirm the chemical modification of saltbush (Atriplex canescens) biomass and to provide information about the identity and binding characteristics of the chemical groups responsible for the binding of Cd(II), Cr(III), and Cr(VI). In addition, studies were performed to determine the optimum time for the binding of the three ions by saltbush biomass, and to study the efficiency of HCl and sodium citrate as stripping agents. The metal quantification was performed using inductively coupled plasma optical emission spectroscopy (ICP-OES). The results showed that 10 min or less is enough to achieve the maximum metal binding, and that aqueous solutions of 0.1 mM HCl or sodium citrate were enough to strip more than 80% of the bound Cd. It was determined that more than 70% of the bound Cr(III) was stripped using 0.1 mM HCl. Chemical modification of carboxyl and ester groups on the biomass was performed. The FTIR results confirmed that the esterification of carboxyl groups and hydrolysis of ester groups in the native biomass had occurred. The direct effect of these modifications on the binding properties of the biomass provided strong evidence that the carboxyl functionality is the main group responsible for binding Cd and Cr(III). However, the IR data showed that for Cr(VI), a different type of functional group is involved.     

Body mass index and serum chlorinated dibenzo-p-dioxin and dibenzofuran levels

Several studies have found that current levels of 2,3,7,8 tetrachlorodibenzo-p-dioxin in serum lipids are related to age with older persons generally having higher levels. To account for this age pattern, reference ranges based on national samples have been established in order to allow determination of background levels for regional studies. In several studies, body mass index (BMI), has also been associated with current 2,3,7,8 tetrachlorodibenzo-p-dioxin levels with increasing body mass index related to increasing levels. We measured lipid-adjusted serum levels for all 2,3,7,8-substituted dioxins and furans in 62 chemical manufacturing workers with chlorophenol exposures and 36 workers without chlorophenol exposures employed at the same location. We then assessed the impact of age and BMI on the serum levels of all these compounds in the presence of other potential confounders. We found that both factors are important independent determinants of serum levels of 2,3,7,8-substituted dioxins and furans. Specifically, age and BMI are both important factors for assessing background levels of 2,3,7,8 tetrachlorodibenzo-p-dioxin, 1,2,3,7,8 pentachlorodibenzo-p-dioxin and the calculated total toxic equivalency. BMI, but not age, is important for assessing background levels of higher chlorinated dioxins and some hexachlorofurans. We conclude that age and BMI are both important considerations when comparing a potentially exposed group to a referent group, or to national norms. Further, age and BMI may also be important in epidemiology studies where back-extrapolation from current dioxin levels is used to assess historical chlorophenol exposure.     

Occurrence and fate of polycyclic musks in wastewater treatment plants in Kentucky and Georgia, USA

Wastewater treatment plants (WWTPs) are a potential of source of polycyclic musks in the aquatic environment. In this study, contamination profiles and mass flow of polycyclic musks, 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta[gamma]-2-benzopyran (HHCB), 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene (AHTN), and HHCB-lactone (oxidation product of HHCB), in two WWTPs, one located in Kentucky (Plant A, rural area) and the other in Georgia (Plant B, urban), USA, were determined. HHCB, AHTN and HHCB-lactone were detected in the influent, effluent, and sludge samples analyzed. The concentrations in wastewater samples varied widely, from 10 to 7,030 ng/l, 13 to 5,400 ng/l, and 66 to 790 ng/l, for HHCB, AHTN, and HHCB-lactone, respectively. Sludge samples contained HHCB at <0.02-36 microg/g dry weight, AHTN at <0.02-7.2 microg/g dry weight, and HHCB-lactone at <0.05-17 microg/g dry weight. Based on the daily flow rates and mean concentrations of polycyclic musks, the estimated discharge of total polycyclic musks to the rivers was 21 g/day from Plant A and 31 g/day from Plant B. Mass balance analysis suggested that only 30% of HHCB and AHTN entering the plants was accounted for in the effluent and the sludge. Removal efficiencies of HHCB and AHTN in the two WWTPs ranged from 72% to 98%. In contrast, HHCB-lactone concentrations increased following the treatment. Concentrations of polycyclic musks in sludge were on the order of several parts per million. Incineration of sludge at one plant reduced the concentration of polycyclic musks.     

Rapid quantification of polycyclic aromatic hydrocarbons in hydroxypropyl-beta-cyclodextrin (HPCD) soil extracts by synchronous fluorescence spectroscopy (SFS)

Synchronous fluorescence spectroscopy (SFS) was directly applied to rapidly quantify selected polycyclic aromatic hydrocarbons (PAHs: benzo[a]pyrene and pyrene) in aqueous hydroxypropyl-beta-cyclodextrin (HPCD) soil extract solutions from a variety of aged contaminated soils containing four different PAHs. The method was optimized and validated. The results show that SFS can be used to analyse benzo[a]pyrene and pyrene in HPCD based soil extracts with high sensitivity and selectivity. The linear calibration ranges were 4.0x10(-6)-1.0x10(-3)mM for benzo[a]pyrene and 6.0x10(-6)-1.2x10(-3)mM for pyrene in 10mM HPCD aqueous solution alone. The detection limits according to the error propagation theory for benzo[a]pyrene and pyrene were 3.9x10(-6) and 5.4x10(-6)mM, respectively. A good agreement between SFS and HPLC was reached for both determinations of PAHs in HPCD alone and in soil HPCD extracts. Hence, SFS is a potential means to simplify the present non-exhaustive hydroxypropyl-beta-cyclodextrin (HPCD)-based extraction technique for the evaluation of PAH bioavailability in soil.     

Effectiveness of dust dispersion in the 20-L Siwek chamber

The Siwek 20-L chamber is widely used throughout the world to evaluate the explosibility of dusts. This research evaluated the quality of dust dispersion in the Siwek 20-L chamber using Pittsburgh coal, Gilsonite, and purple K dusts. A Pittsburgh Research Laboratory (PRL) optical dust probe was used to measure optical transmittance through the dust cloud at various locations within the chamber. A total of 540 tests were performed, with triplicate tests at five nominal dust concentrations and six locations. The two standard dispersion nozzles (rebound and perforated annular nozzle) were compared. The transmissions corresponding to the normal ignition delay period were used to: (a) determine variations in spatial uniformity of dispersion obtained with both nozzles; (b) make comparisons between the experimental transmission data and those calculated from theory for the three dusts; and (c) make comparisons with transmission data measured in the PRL 20-L and Fike 1-m³ dust explosion chambers.The uniformity of dispersion for the three dusts was similar with both nozzles, despite the differences in nozzle geometry and mode of operation. Transmission data of the three dusts were all significantly lower than those calculated from theory. This was discovered to be, in part, due to significant reduction in particle size that occurred during dispersion. By measuring particle sizes before and after dispersion, values of 60%, 50%, and 20% reduction in particle size (based on the surface-weighted mean diameter) were obtained for Pittsburgh coal, Gilsonite, and purple K, respectively. Transmission data from the PRL 20-L, Fike 1-m³ and the Siwek 20-L chambers indicated comparable results in terms of uniformity of dispersion. However, transmission data from the Siwek 20-L chamber were significantly lower than those of the PRL and Fike chambers. Again, this was attributed, in part, to the significant reduction in particle size that occurred during dispersion in the Siwek chamber. The design of the outlet (dispersion) valve of the Siwek 20-L apparatus charge vessel was largely responsible for the particle break-up. The contribution to particle break-up by the dispersion nozzles and the high level of turbulence in the chamber were found to be minimal. This is a significant finding in that the dust particle size tested for explosibility in the Siwek chamber is considerably smaller than the original dust sample.     

Factors affecting aural detections of songbirds.

Many factors affect the number of birds detected on point count surveys of breeding songbirds. The magnitude and importance of these factors are not well understood. We used a bird song simulation system to quantify the effects of detection distance, singing rate, species differences, and observer differences on detection probabilities of birds detected by ear. We simulated 40 point counts consisting of 10 birds per count for five primary species (Black-and-white Warbler Mniotilta varia, Black-throated Blue Warbler Dendroica caerulescens, Black-throated Green Warbler Dendroica virens, Hooded Warbler Wilsonia citrina, and Ovenbird Seiurus aurocapillus) over a range of 15 distances (34-143 m). Songs were played at low (two songs per count) and high (13-21 songs per count) singing rates. Detection probabilities averaged across observers ranged from 0.60 (Black-and-white Warbler) to 0.83 (Hooded Warbler) at the high singing rate and 0.41 (Black-and-white Warbler) to 0.67 (Hooded Warbler) at the low singing rate. Logistic regression analyses indicated that species, singing rate, distance, and observer were all significant factors affecting detection probabilities. Singing rate x species and singing rate X distance interactions were also significant. Simulations of expected counts, based on the best logistic model, indicated that observers detected between 19% (for the worst observer, lowest singing rate, and least detectable species) and 65% (for the best observer, highest singing rate, and most detectable species) of the true population. Detection probabilities on actual point count surveys are likely to vary even more because many sources of variability were controlled in our experiments. These findings strongly support the importance of adjusting measures of avian diversity or abundance from auditory point counts with direct estimates of detection probability.