Toxicity Evaluation with the Microtox Test to Assess the Impact of In Situ Oiled Shoreline Treatment Options: Natural Attenuation and Sediment Relocation

Changes in the toxicity levels of beach sediment, nearshore water, and bottom sediment samples were monitored with the Microtox^® Test to evaluate the two in situ oil spill treatment options of natural attenuation (natural recovery--no treatment) and sediment relocation (surf washing). During a series of field trials, IF-30 fuel oil was intentionally sprayed onto the surface of three mixed sediment (pebble and sand) beaches on the island of Spitsbergen, Svalbard, Norway (78°56^′ N, 16°45^′ E). At a low wave-energy site (Site 1 with a 3-km wind fetch), where oil was stranded within the zone of normal wave action, residual oil concentrations and beach sediment toxicity levels were significantly reduced by both options in less than five days. At Site 3, a higher wave-energy site with a 40-km wind fetch, oil was intentionally stranded on the beach face in the upper intertidal/supratidal zones, above the level of normal wave activity. At this site under these experimental conditions, sediment relocation was effective in accelerating the removal of the oil from the sediments and reducing the Microtox^® Test toxicity response to background levels. In the untreated (natural attenuation) plot at this site, the fraction of residual oil remaining within the beach sediments after one year (70%) continued to generate a toxic response. Chemical and toxicological analyses of nearshore sediment and sediment-trap samples at both sites confirmed that oil and suspended mineral fines were effectively dispersed into the surrounding environment by the in situ treatments. In terms of secondary potential detrimental effects from the release of stranded oil from the beaches, the toxicity level (Microtox^® Test) of adjacent nearshore sediment samples did not exceed the Canadian regulatory limit for dredged spoils destined for ocean disposal.     

Pure-culture and enzymatic assay for starch-polyethylene degradable plastic biodegradation withStreptomyces species

Eleven starch-polyethylene degradable plastic films were prepared from masterbatches from Archer Daniels Midland Inc. (ADM), EcoStar Inc. (SLS), and Fully Compounded Plastic Inc. The biodegradability of initial and 70°C heat-treated materials was determined using a pure-culture assay withStreptomyces badius 252,S. setonii 75Vi2, orS. viridosporus T7A or without bacterial culture (control). Films were treated with 10-foldS. setonii culture concentrates and compared with inactive enzyme controls. Changes in each films mechanical property, molecular weight distribution, and Fourier-transformed infrared spectrum (FT-IR) were determined, and results were evaluated for significant differences by analysis of variance. Cell mass accumulation on each film was quite pronounced. In pure-culture studies, biodegradation was demonstrated for ADM-7 and SLS-2 initial films and for ADM-6 heat-treated films, whereas after 3-week treatment with activeS. setonii culture concentrates (enzyme assay), reductions in mechanical properties and changes in FT-IR spectrum were illustrated by all the films except SLS-2. Thus the absence of biofilm formation on the film surface permitted enzymatic attack of the materials. Furthermore, inhibition of chemical oxidative degradation in the pure-culture assay was demonstrated for ADM-11, SLS-5, and SLS-10 initial materials and for ADM-4, ADM-7, SLS-8, and SLS-10 heat-treated films. These data suggest that biological and chemical degradation were directly affected by the reduction in oxygen tension on the plastic film surface due to cell mass accumulation. This same phenomenon could be the cause for slow degradation rates in nature.Journal Paper No. J-15061 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project Nos. 0178 and 2889.     

CATCHMENT RESPONSE TIME AS A PREDICTOR OF FLOOD QUANTILES1

ABSTRACT: A regression analysis using a generalized least squares approach on flow data from the driftless area of Wisconsin indicates that the ratio of drainage area to time-to-peak is a good predictor of flood quantiles. The estimation of time-to-peak (or some other measure of basin response time) requires direct measurement of river stage and possibly rainfall at the site of which the quantiles are to be estimated. The cost-effectiveness of such an approach must yet be determined.     

New perspectives in ecotoxicology

The task of regulating potentially harmful chemicals in the environment is presently hindered by the lack of appropriate concepts and methods for evaluating the effects of anthropogenic chemicals on ecosystems. Toxicity tests at the molecular and physiological levels have been used successfully as indicators of adverse effects on test organisms and have been extrapolated to humans to establish a basis for risk assessment. However, laboratory measurements of effects upon individuals do not translate readily into potential effects upon natural populations, in part because natural populations interact with other populations and with the physical environment. Even more difficult to assess are the deleterious impacts of anthropogenic chemicals on ecosystems, because of effects on species interactions, diversity, nutrient cycling, productivity, climatic changes, and other processes.Effects on ecosystems resulting from chemical stresses are outside the realm of classical toxicology, and an ecosystem-level perspective is essential for the consideration of such effects; but the science that deals with ecosystem-level effects,ecotoxicology, is still developing. This article synthesizes the topics discussed at a workshop on ecotoxicology held by the Ecosystems Research Center at Cornell University. Topics covered include: the regulatory framework in which ecotoxicological research must be applied; ecosystem modification of toxicant fate and transport; how ecosystem composition, structure, and function are influenced by chemicals; methods currently available for predicting the effects of chemicals at the ecosystem level; and recommendations on research needs to enhance the state of the science of ecotoxicology.     

Explosion temperatures and pressures of metals and other elemental dust clouds

The Pittsburgh Research Laboratory of the National Institute for Occupational Safety and Health (NIOSH) conducted a study of the explosibility of various metals and other elemental dusts, with a focus on the experimental explosion temperatures. The data are useful for understanding the basics of dust cloud combustion, as well as for evaluating explosion hazards in the minerals and metals processing industries. The dusts studied included boron, carbon, magnesium, aluminum, silicon, sulfur, titanium, chromium, iron, nickel, copper, zinc, niobium, molybdenum, tin, hafnium, tantalum, tungsten, and lead. The dusts were chosen to cover a wide range of physical properties—from the more volatile materials such as magnesium, aluminum, sulfur, and zinc to the highly “refractory” elements such as carbon, niobium, molybdenum, tantalum, and tungsten. These flammability studies were conducted in a 20-L chamber, using strong pyrotechnic ignitors. A unique multiwavelength infrared pyrometer was used to measure the temperatures. For the elemental dusts studied, all ignited and burned as air-dispersed dust clouds except for nickel, copper, molybdenum, and lead. The measured maximum explosion temperatures ranged from 1550 K for tin and tungsten powders to 2800 K for aluminum, magnesium, and titanium powders. The measured temperatures are compared to the calculated, adiabatic flame temperatures.     

Voluntary Pollution Prevention Programs in New Zealand - An evaluation of practice versus design features

Coordinated voluntary approaches to Pollution Prevention are widely practiced in many western-style economies. However, little empirical research has been undertaken into the extent to which these approaches match best practice pollution prevention approaches. In this paper nine programs employed by five regional and district councils in New Zealand are evaluated against nine ‘Best Practice’ design features. All five councils’ pollution prevention programs contained some of the best practice design features in their program’s design. Perhaps not surprisingly the older programs rank highest out of the five. However, all programs have the potential to develop towards containing all of the ‘best practice’ design features, with most emphasis needed on the credibility of program monitoring. From an ongoing research perspective, and also from an overall PP program performance point of view, the biggest challenge remains the extent and depth that the programs apply each of the design features. As presented they are extremely generic. While generic design features provide for flexibility in implementation, often seen as a positive, they can also be a recipe for ‘tokenism’, something that future researchers and program managers need to be aware of. We also sought to determine if these programs were contributing to sustainable management in New Zealand. Findings in this respect were equivocal. This finding in part is due to the lack of specificity around targets, monitoring and reporting, items needing further attention from managers and researchers.