Field testing of conversion of sewage sludge to daily landfill cover material

Solidification of sewage sludge has been actively investigated in Japan and Europe since the 1970s. Most previous studies have focused on only the mechanical aspects of potential alternative cover soil made using sewage. Most solidification processes, however, suffer from severe odor problems because of the high alkalinity of the material. The objectives of this study are to develop a cost-effective solidifying agent for conversion of sewage sludge in order to reduce the odor generation, as an alternative to the conventional cement lime-based solidifying agent, and to demonstrate its applicability in the field experimentally. Field test results showed compressive strength well above the 1.0 kg/cm² criterion for landfill cover soil in Korea. Also, the permeability coefficient was far below the 5 × 10⁻⁵ cm/s design criterion for landfill cover soil. Even in harsh weather conditions, such as in winter and summer, the compressive strength was increased. In addition, the permeability was decreased from 3.45 × 10⁻⁶ cm/s to 4.78 × 10⁻⁷ cm/s, and from 2.27 × 10⁻⁶ cm/s to 3.62 × 10⁻⁷ cm/s, at 7 days after placement in January and August, respectively. It can therefore be postulated that the proposed solidification process is an appropriate alternative for production of daily landfill cover material. Concerning the odor problem, 5 min of mixing of sewage with TS103, one of the proprietary agents used in this work, was sufficient to suppress the concentration of ammonia emitted to below 10 ppm. Considering all of these experimental field test results, it is expected that the proposed method could be a competitive approach for manufacture of alternative landfill cover material.     

Is kin cooperation going on undetected in marine bird colonies?

In multitudinous breeding colonies, kin interactions could go unnoticed because we are unaware of the kinship among adults we observe. Evidence of cooperation and competition between close adult kin in a blue-footed booby colony was sought by analyzing patterns of natal dispersal and proximity of nests. Male and female recruits nested closer to their own natal sites than to their parents’ current sites. Males (only) dispersed less far when both parents were present than when no parent or one parent was present, but not selectively close to fathers versus mothers when these were divorced. Neither parental presence nor parental proximity affected breeding success of recruits of either sex. Although distances between the nests of simultaneously recruiting broodmates were unrelated to their sex, males dispersed 13.1 m less when a sister was present than when a brother was present. Neither sex was affected in its dispersal distance by the presence or hatching order/dominance of a broodmate. Neither sex was affected in its breeding success by the presence versus absence of a broodmate, although female success increased with proximity of their brothers. Parents and sisters may actively or passively help males establish their first territories near their natal sites and nearby brothers may help females in their first breeding attempts; otherwise, boobies do not influence each other’s natal dispersal and first breeding success. It appears that boobies do not nest selectively close to or far from their parents, offspring, or broodmates. Why there is apparently so little cooperation and altruism between close adult relatives in booby colonies is puzzling.     

Community gardens and sustainable land use planning: A case-study of the Alex Wilson community garden

An analytical account of the history and aspirations of the Alex Wilson Community Garden in Toronto provides an ideal opportunity to examine the connections between two typically distinct enterprises: ecological restoration and community gardening. These are both important contemporary ecological movements, but are rarely combined in a single project that demonstrates the principles of sustainable land use and community planning. The garden is named in memory of Alex Wilson, a landscape designer, community activist and writer who worked and lived in Toronto, Canada. During his life, Wilson established a community garden which was eventually replaced by conventional urban development. After his death in 1993, friends and colleagues decided to honour his memory by establishing a permanent community garden in his name. The Alex Wilson Community Garden opened to the public in June 1998. The case-study explores how the garden reflects Wilson's work by linking community gardening and ecological restoration. These features are unified in Wilson's work as a means of nurturing relationships between people, communities and the landscape—relationships that are social, economic and ecological. In his book,The Culture of Nature: North American landscape from Disney to the Exxon Valdez (1991), Wilson argues that “we must build landscapes that heal and empower, that make intelligible our relations with each other and the natural world”. The Alex Wilson Community Garden illustrates in a practical manner the principles espoused by Wilson through its design, planning and functioning. The case-study reports on the innovative approach to landscape design taken in the garden, which reconstructs the natural and cultural history of southern Ontario, featuring lake-shore, agricultural and woodland sections. The garden has been planted exclusively with native plant species, and is expected to have a positive impact on local biodiversity. The planning process which led up to the design of the garden was participatory in nature, encompassing friends and colleagues of Alex Wilson, local residents and city planning officials, and made use of a number of planning tools not usually applied in an urban setting, including the granting of a conservation easement. The garden also addresses emerging issues associated with globalisation and large cities by providing food production opportunities for local residents, including a low-income housing complex and a nearby drop-in centre. Ecological monitoring and assessment of the naturalised area will be carried out by local residents.     

Electrochemical conversion of biomass-derived aldehydes into fine chemicals and hydrogen: A review

Environmental Chemistry Letters - The decrease in fossil fuel usage and the projected 28% increase in the global energy demand by 2040 are calling for advanced methods to convert modern biomass...     

Comparing Onsite and Offsite Methods for Measuring Norms for Trail Impacts

This study examined the comparability of onsite and offsite methods for measuring norms for trail impacts using photo/survey techniques. A total of 449 subjects participated in a study of Mudeung-Mountain Provincial Park, Gwang-Ju, Korea. For the overall photo evaluation method (OPEM), respondents rated the acceptability of bare soil area for each of a series of photographs. For the specific photo evaluation method (SPEM), respondents selected a photograph that illustrated the largest acceptable proportion of bare soil area from a series of 10 photographs. Overall, there were no substantial differences in maximum acceptable impacts between onsite (onsite-I visitor group surveyed at the actual trail points and onsite-II departing visitor group surveyed at the exit area) and offsite (students surveyed in a laboratory setting) groups for the two norm measurement alternatives (OPEM and SPEM). Subjects’ difficulty ratings were low for both methods, and there were no substantial differences in norms between individuals with high and low levels of experience at the park. The offsite method appears to be substitutable for onsite methods in this particular study area, which is a frontcountry setting with a relatively simple range of recreation opportunities. Implications and further studies are discussed.     

Correction to: Status and trends of circumpolar peregrine falcon and gyrfalcon populations

While collating contributions and comments from 36 researchers, the coordinating authors accidentally omitted Dr. Suzanne Carrière from the list of contributing co-authors. Dr. Carrière’s data are described in Tables 1 and 3, Figure 2 and several places in the narrative. The new author list is thus updated in this article.     

Ultra trace simultaneous determination of 50 polycyclic aromatic hydrocarbons in biota using pMRM GC-MS/MS

Abstract

A saponification extraction method with gas chromatography pseudo-MRM (pMRM) mass spectrometry detection was developed for the determination of 50 total polycyclic aromatic hydrocarbons (TPAH50, a combination of parent and alkylated homologues) in biota. The method was aimed at monitoring and identification of potential TPAH contaminants in bitumen impacted environments. Alkylated PAHs were determined by multi-level, quantitative calibration using parent PAHs. The developed and thoroughly validated method required only one injection for TPAH50 analysis which represents significant saving of time and expensive authentic alkylated standards. The current method was tested with certified reference mussel tissue NIST 1974c and performed well. In a comparison study, the method reached a limit of quantitation (LOQ) for the TPAH50 between 0.1 and 0.2?ng g^?1, while the QuEChERs enhanced matrix removal – lipid (EMR) kit produced by Agilent showed an LOQ of 5–10?ng g^?1. The current method relied on response factors (RF) for the quantitation of alkylated PAHs determined against parent PAHs. These RFs were shown to be stable and consistent over the course of 1 year, during which over 200 routine environmental biota monitoring samples were analyzed. The environmental biota monitoring samples analyzed include muscle, carcass and liver, with an average total PAH50 concentration of 13, 90 and 135?ng g^?1, respectively. Results show significant differences in the distributions of 1 ringed, 2 ringed, 3 ringed, 4 ringed, and 5+ ringed TPAHs between the types of biota samples.     

Effect of biomass burning and regional background aerosols on CCN activity derived from airborne in-situ measurements

Airborne in-situ measurements were analyzed to investigate the effects of biomass burning and regional background aerosols on cloud condensation nuclei (CCN) activity in the Pacific Dust Experiment (PACDEX) during April and May 2007. Airmass trajectories with both horizontal and vertical motions were provided to identify the aerosol sources. In the biomass burning cases, the elevated aerosol layers were clearly observed at dry conditions because of the convection of airmass in the source region. The relative aging of aerosols was supported by the ratios of BC to particles with size ranging from 0.1 to 1.0 μm (N_0.1–1.0) and BC to carbon monoxide. Compared to aerosols in the precedent plume of biomass burning, aged particles in the latter plume were more activated to CCN at 0.4% (CCN_0.4%) than 0.1% supersaturation (CCN_0.1%) due to aerosols chemical modification during the aging process. On the other hand, significant difference of CCN_0.4% and CCN_0.1% at regional background aerosols over the Pacific Ocean was due to the activated particles below 1 μm in diameter. Although higher concentrations of aged particles were observed over the eastern Pacific Ocean, activated aerosols to cloud droplet was comparatively similar in the western Pacific Ocean because of the similar concentrations of N_0.1–1.0 in both cases.     

Personal exposure of graduate students attending the college of natural sciences or social sciences to volatile organic compounds on campus

The present study measured the levels of 24 selected volatile organic compounds (VOCs) in the personal air samples obtained from graduate students attending the college of natural sciences (GSNSs) or social science (GSSSs) during their daily activities on campus along with associated indoor and outdoor air samples. In addition, the sources of their personal exposure were characterized using multivariate statistical models. In the personal samples of GSNSs and GSSSs, 16 and 15 different VOCs were always detected, respectively. The personal exposure of five chlorinated hydrocarbons and six aromatics was significantly higher for GSNSs than for GSSSs. Consistently, the indoor levels of these compounds were higher for GSNSs (in research and laboratory rooms) than for GSSSs (in research rooms). However, the personal exposure of two aromatic VOCs (1,2,4- and 1,3,5-trimethylbenzene) was higher for GSSSs. Moreover, the personal exposure of the five chlorinated and six aromatic compounds was significantly correlated with VOC concentrations both in the research and laboratory rooms of GSNSs and with those in the research rooms of GSSSs. For certain VOCs, outdoor sources were also a major contributor to the personal exposure of both GSNSs and GSSSs. The multivariate models identified five factors that accounted for 81% of the total variance and four factors that explained 76% of the total variance. It was further suggested that multiple indoor sources in research rooms such as office equipment, building finishing materials, and air fresheners were the main source for the personal exposure to VOCs for GSNSs, whereas building finishing materials were the main source for GSSSs.     

Empirical correlations to estimate agglomerate size and deposition during injection of a polyelectrolyte-modified Fe0 nanoparticle at high particle concentration in saturated sand

Controlled emplacement of polyelectrolyte-modified nanoscale zerovalent iron (NZVI) particles at high particle concentration (1-10 g/L) is needed for effective in situ subsurface remediation using NZVI. Deep bed filtration theory cannot be used to estimate the transport and deposition of concentrated polyelectrolyte-modified NZVI dispersions (>0.03 g/L) because particles agglomerate during transport which violates a fundamental assumption of the theory. Here we develop two empirical correlations for estimating the deposition and transport of concentrated polyelectrolyte-modified NZVI dispersions in saturated porous media when NZVI agglomeration in porous media is assumed to reach steady state quickly. The first correlation determines the apparent stable agglomerate size formed during NZVI transport in porous media for a fixed hydrogeochemical condition. The second correlation estimates the attachment efficiency (sticking coefficient) of the stable agglomerates. Both correlations are described using dimensionless numbers derived from parameters affecting deposition and agglomeration in porous media. The exponents for the dimensionless numbers are determined from statistical analysis of breakthrough data for polyelectrolyte-modified NZVI dispersions collected in laboratory scale column experiments for a range of ionic strength (1, 10, and 50mM Na(+) and 0.25, 1, and 1.25 mM Ca(2+)), approach velocity (0.8 to 55 × 10(-4)m/s), average collector sizes (d(50)=99 μm, 300 μm, and 880 μm), and polyelectrolyte surface modifier properties. Attachment efficiency depended on approach velocity and was inversely related to collector size, which is contrary to that predicted from classic filtration models. High ionic strength, the presence of divalent cations, lower extended adsorbed polyelectrolyte layer thickness, decreased approach velocity, and a larger collector size promoted NZVI agglomeration and deposition and thus limited its mobility in porous media. These effects are captured quantitatively in the two correlations developed. The application and limitations of using the correlations for preliminary design of in situ NZVI emplacement strategies is discussed.