Effect of substrate Henry's constant on biofilter performance

Butanol, ether, toluene, and hexane, which have Henry's constants ranging from 0.0005 to 53, were used to investigate the effects of substrate solubility or availability on the removal of volatile organic compounds (VOCs) in trickle-bed biofilters. Results from this study suggest that, although removal of a VOC generally increases with a decrease in its Henry's constant, an optimal Henry's constant range for biofiltration may exist. For the treatment of VOCs with high Henry's constant values, such as hexane and toluene, the transfer of VOCs between the vapor and liquid phases or between the vapor phase and the biofilm is a rate-determining step. However, oxygen (O2) transfer may become a rate-limiting step in treating VOCs with low Henry's constants, such as butanol, especially at high organic loadings. The results demonstrated that in a gas-phase aerobic biofilter, nitrate can serve both as a growth-controlling nutrient and as an electron acceptor in a biofilm for the respiration of VOCs with low Henry's constants. Microbial communities within the biofilters were examined using denaturing gradient gel electrophoresis to provide a more complete picture of the effect of O2 limitation and denitrification on biofilter performance.     

Humic colloid-borne migration of uranium in sand columns

Column experiments were carried out to investigate the influence of humic colloids on subsurface uranium migration. The columns were packed with well-characterized aeolian quartz sand and equilibrated with groundwater rich in humic colloids (dissolved organic carbon (DOC): 30 mg dm(-3)). U migration was studied under an Ar/1% CO2 gas atmosphere as a function of the migration time, which was controlled by the flow velocity or the column length. In addition, the contact time of U with groundwater prior to introduction into a column was varied. U(VI) was found to be the dominant oxidation state in the spiked groundwater. The breakthrough curves indicate that U was transported as a humic colloid-borne species with a velocity up to 5% faster than the mean groundwater flow. The fraction of humic colloid-borne species increases with increasing prior contact time and also with decreasing migration time. The migration behavior was attributed to a kinetically controlled association/dissociation of U onto and from humic colloids and also a subsequent sorption of U onto the sediment surface. The column experiments provide an insight into humic colloid-mediated U migration in subsurface aquifers.     

Contaminant transport in dual-porosity media with dissolved organic matter and bacteria present as mobile colloids

In riverbank filtration, contaminant transport is affected by colloidal particles such as dissolved organic matter (DOM) and bacterial particles. In addition, the subsurface heterogeneity influences the behavior of contaminant transport in riverbank filtration. A mathematical model is developed to describe the contaminant transport in dual-porosity media in the presence of DOM and bacteria as mobile colloids. In the model development, a porous medium is divided into the mobile and immobile regions to consider the presence of ineffective micropores in physically heterogeneous riverbanks. We assume that the contaminant transport in the mobile region is controlled by the advection and dispersion while the contaminant transport in the immobile region occurs due to the molecular diffusion. The contaminant transfer between the mobile and immobile regions takes place by diffusive mass transfer. The mobile region is conceptualized as a four-phase system: two mobile colloidal phases, an aqueous phase, and a solid matrix. The complete set of governing equations is solved numerically with a fully implicit finite difference method. The model results show that in riverbank filtration, the contaminant can migrate further than expected due to the presence of DOM and bacteria. In addition, the contaminant mobility increases further in the presence of the immobile region in aquifers. A sensitivity analysis shows that in dual-porosity media, earlier breakthrough of the contaminant takes place as the volumetric fraction of the mobile region decreases. It is also demonstrated that as the contaminant mass transfer rate coefficient between the mobile and immobile regions increases, the contaminant concentration gradient between the two regions reverses at earlier pore volumes. The contaminant mass transfer coefficient between the mobile and immobile regions mainly controls the tailing effect of the contaminant breakthrough. The contaminant breakthrough curves are sensitive to changes in contaminant adsorption and desorption rate coefficients on DOM and bacteria. In situations where the contaminant is released in the presence of DOM and bacteria in dual-porosity media, the early breakthrough and tailing occur due to the colloidal facilitation and presence of immobile regions.     

Organotins and imposex in the rock shell, Thais clavigera, from oyster mariculture areas in Taiwan

The amounts of organotin compounds such as butyltins [sigma BTs: tributyl- (TBT), dibutyl- (DBT), monobutyl- (MBT)] and phenyltins [sigma PhTs: triphenyl- (TPhT), diphenyl- (DPhT) and monophenyl- (MPhT)] in rock shells, Thais clavigera, from the northern (Shiangsan), central (Lukang) and southern (Chiku) Taiwan oyster mariculture areas varied with season and location. High values of sigma BTs (mainly TBT) and low values of sigma PhTs (mainly TPhT) were found during winter (January 1999) at Shiangsan, while high amounts of sigma PhTs (mainly TPhT) and low sigma BTs (mainly TBT) were found during summer (August 1998) at Lukang. The snails were also affected by imposex. Imposex at Shiangsan, Lukang and Chiku increased from 67.1, 59.3 and 36.7% in summer to 100, 100 and 80% in winter, respectively. Relative penis size indices similar trend at Chiku site. No male displayed rock shells were found at Shiangsan and Lukang in winter. Linear correlations between pseudopenis length versus TBT (r = 0.7655, P < 0.001), DBT (r = 0.4253, P < 0.05), MBT (r = 0.5865, P < 0.01) and TPhT (r = -0.6160, P < 0.01) were obtained significant. Among 200 samples, significant positive correlations between length (pseudopenis/shell) ratio of female versus TBT (r = 0.6944, P < 0.005) and sigma BTs (r = 0.6413, r < 0.01) were also observed. The weak correlations between length (pseudopenis/shell) ratio of female versus DBT (r = 0.3085) and MBT (r = 0.4240, P < 0.1) and TPhT (-0.4917, P < 0.05; negative correlation) could indicate that DBT, MBT and TPhT have little or no effect on the development of imposex in rock shells.     

Observations of aerosol-bound ionic compositions at Cheju Island,Korea

To investigate the regional cycle of aerosols and their ionic constituents, three field intensive campaigns were conducted during fall and winter of 1997 and spring of 1998. The concentrations of most ionic species were found to decrease significantly across fall, winter, and spring such that the sum for all cation (and anion) species of each season is computed as: 193 > 96 > 73.7 nequiv m(-3) (and 240 > 104 > 51.5 nequiv m(-3)). To examine the fundamental characteristics of aerosol compositions in the study area, we conducted correlation analysis in various manners. The results indicated that the concentrations of major ionic species were strongly affected by some meteorological parameters including wind speed. It was also seen that relative strengths of correlations between important parameters (e.g., between wind speed and most of major inorganic species) maintain close relationships with the factors associated with the air mass origin. In addition, the results of factor analysis indicated the existence of at least three major sources in the study area which include: sea-salt aerosol, secondary aerosol, and organic aerosol component. The springtime occurrence of unexpectedly low concentrations of most ionic constituents is found to sensitively reflect the influence of the inflow of southeasterly winds that prevailed during spring, while it is not common for that season of the year. Because most of those changes are closely tied with the variabilities in the regional circulation patterns for each measurement period, assessment of the ionic composition in concert with the temporal variations of meteorological conditions provided valuable insights into the source signals of different air masses that passed by the study area.     

Assessment of the photochemistry of OH and NO3 on Jeju Island during the Asian-dust-storm period in the spring of 2001

In this study, we examined the influence of the long-range transport of dust particles and air pollutants on the photochemistry of OH and NO3 on Jeju Island, Korea (33.17 degrees N, 126.10 degrees E) during the Asian-dust-storm (ADS) period of April 2001. Three ADS events were observed during the periods of April 10-12, 13-14, and 25-26. Average concentration levels of daytime OH and nighttime NO3 on Jeju Island during the ADS period were estimated to be about 1x10(6) and 2x10(8) moleculescm(-3) ( approximately 9 pptv), respectively. OH levels during the ADS period were lower than those during the non-Asian-dust-storm (NADS) period by a factor of 1.5. This was likely to result from higher CO levels and the significant loading of dust particles, reducing the photolysis frequencies of ozone. Decreases in NO3 levels during the ADS period was likely to be determined mainly by the enhancement of the N2O5 heterogeneous reaction on dust aerosol surfaces. Averaged over 24 h, the reaction between HO2 and NO was the most important source of OH during the study period, followed by ozone photolysis, which contributed more than 95% of the total source. The reactions with CO, NO2, and non-methane hydrocarbons (NMHCs) during the study period were major sinks for OH. The reaction of N2O5 on aerosol surfaces was a more important sink for nighttime NO3 during the ADS due to the significant loading of dust particles. The reaction of NO3 with NMHCs and the gas-phase reaction of N2O5 with water vapor were both significant loss mechanisms during the study period, especially during the NADS. However, dry deposition of these oxidized nitrogen species and a heterogeneous reaction of NO3 were of no importance.     

Long-term effects of fertilization on the forms and availability of soil phosphorus in rice paddy

The changes in total P accumulation and P compounds with time in the plough layer in a paddy soil in southern Korea were investigated in relation to the continuous application of chemical fertilizers (NPK), straw based compost (Compost), combination these two (NPK+Compost) for 31 years. Continuous fertilization increased the total and inorganic P contents in plough layers. In NPK, inorganic P fraction did not change with time, but organic P content increased significantly. Long-term application of chemical fertilizer together with compost accelerated the decrease in the organic P fraction, presumably due to promoting microbial activity in the plow layer, and then increased significantly inorganic P fraction. Compost application decreased the residual P and Fe-P fractions and then increased inorganic P fraction, in spite of continuous compost application. Increase in total, inorganic and extractable P with time may be closely related to the increase in the availability of accumulated P for rice growth.     

Refinement of the density-modified displacement method for efficient treatment of tetrachloroethene source zones

A novel method to remediate dense nonaqueous phase liquid (DNAPL) source zones that incorporates in situ density conversion of DNAPL via alcohol partitioning followed by displacement with a low interfacial tension (IFT) surfactant flood has been developed. Previous studies demonstrated the ability of the density-modified displacement (DMD) method to recover chlorobenzene (CB) and trichloroethene (TCE) from heterogeneous porous media without downward migration of the dissolved plume or free product. However, the extent of alcohol (n-butanol) partitioning required for in situ density conversion of high-density NAPLs, such as tetrachloroethene (PCE), could limit the utility of the DMD method. Hence, the objective of this study was to compare the efficacy of two n-butanol delivery approaches: an aqueous solution of 6% (wt) n-butanol and a surfactant-stabilized macroemulsion containing 15% (vol) n-butanol in water, to achieve density reduction of PCE-NAPL in two-dimensional (2-D) aquifer cells. Results of liquid-liquid equilibrium studies indicated that density conversion of PCE relative to water occurred at an n-butanol mole fraction of 0.56, equivalent to approximately 5 ml n-butanol per 1 ml of PCE when in equilibrium with an aqueous solution. In 2-D aquifer cell studies, density conversion of PCE was realized using both n-butanol preflood solutions, with effluent NAPL samples exhibiting density reductions ranging from 0.51 to 0.70 g/ml. Although the overall PCE mass recoveries were similar (91% and 93%) regardless of the n-butanol delivery method, the surfactant-stabilized macroemulsion preflood removed approximately 50% of the PCE mass. In addition, only 1.2 pore volumes of the macroemulsion solution were required to achieve in situ density conversion of PCE, compared to 6.4 pore volumes of the 6% (wt) n-butanol solution. These findings demonstrate that use of the DMD method with a surfactant-stabilized macroemulsion containing n-butanol holds promise as an effective source zone remediation technology, allowing for efficient recovery of PCE-DNAPL while mitigating downward migration of the dissolved plume and free product.     

Characteristics of dioxins and metals emission from radwaste plasma arc melter system

This study investigated the emission characteristics of PCDD/Fs and the partitioning of three heavy metals (Cd, Hg and Pb) and two radioactive metal surrogates (Co and Cs) in a radwaste plasma arc melter system. Typical mixtures of low-level radioactive wastes were simulated as the trial burn surrogate wastes. The emission of PCDD/Fs and the partitioning of the metals were strongly influenced by the feed waste stream and melter operating temperature, respectively. The emissions of PCDD/Fs, cadmium and lead were greatly enhanced when the polyvinyl chloride was included in the feed waste stream. Most of the nonvolatile cobalt partitioned into the glass. A significant quantity of cesium, cadmium and lead was vaporized during the highest melter temperature test. A lower melter temperature resulted in more cesium, cadmium and lead species remaining in the glass. The results of this study suggest that wet scrubbing as well as a low-temperature two-step fine filtration, or both of them together could not effectively capture the gas-phase or fine particle phase PCDD/Fs and mercury species. In order to effectively treat low-level radioactive waste streams, the tested high-temperature melter should include an adsorption system, which could collect the gas-phase PCDD/Fs and mercury species.     

Toxicity and biodegradation of diamines

Phytotoxicity and cytotoxicity of 2,4-diaminotoluene (2,4-D), 4,4'-methylenedianiline (4,4-D), and 1,6-hexanediamine (1,6-D) were investigated by observing the germination of young radish seeds and the viability of HeLa cells, respectively. 2,4-D showed the highest, 4,4-D intermediate, and 1,6-D lowest cytotoxicity. However, the phytotoxicity decreased in the order of 4,4-D > 2,4-D > 1,6-D. Contrary to the results previously reported, in the modified Sturm test the activated sludge degraded 2,4-D and 4,4-D as well as 1,6-D without any pre-acclimation. Ochrobacterium antropi was isolated for degradation of 2,4-D and 4,4-D and Pseudomonas citronellolis for 1,6-D degradation. Thielevia sp. was isolated as 2,4-D degrading fungus and Aspergillus sp. as 4,4-D and 1,6-D degrading fungus. The fungi degraded the diamines faster than the bacteria.