The rhizosphere and PAH amendment mediate impacts on functional and structural bacterial diversity in sandy peat soil

To reveal the degradation capacity of bacteria in PAH polluted soil and rhizosphere we combined bacterial extradiol ring-cleavage dioxygenase and 16S rRNA analysis in Betula pubescens rhizoremediation. Characterisation of the functional bacterial community by RFLP revealed novel environmental dioxygenases, and their putative hosts were studied by 16S rRNA amplification. Plant rhizosphere and PAH amendment effects were detected by the RFLP/T-RFLP analysis. Functional species richness increased in the birch rhizosphere and PAH amendment impacted the compositional diversity of the dioxygenases and the structural 16S rRNA community. A shift from an Acidobacteria and Verrucomicrobia dominated to an Alpha- and Betaproteobacteria dominated community structure was detected in polluted soil. Clone sequence analysis indicated catabolic significance of Burkholderia in PAH polluted soil. These results advance our understanding of rhizoremediation and unveil the extent of uncharacterized functional bacteria to benefit bioremediation by facilitating the development of the molecular tool box to monitor bacterial populations in biodegradation.     

Leaf age affects the responses of foliar injury and gas exchange to tropospheric ozone in Prunus serotina seedlings

We investigated the effect of leaf age on the response of net photosynthesis (A), stomatal conductance (g_wv), foliar injury, and leaf nitrogen concentration (N_L) to tropospheric ozone (O₃) on Prunus serotina seedlings grown in open-plots (AA) and open-top chambers, supplied with either carbon-filtered or non-filtered air. We found significant variation in A, g_wv, foliar injury, and N_L (P < 0.05) among O₃ treatments. Seedlings in AA showed the highest A and g_wv due to relatively low vapor pressure deficit (VPD). Older leaves showed significantly lower A, g_wv, N_L, and higher foliar injury (P < 0.001) than younger leaves. Leaf age affected the response of A, g_wv, and foliar injury to O₃. Both VPD and N_L had a strong influence on leaf gas exchange. Foliar O₃-induced injury appeared when cumulative O₃ uptake reached 8-12 mmol m⁻², depending on soil water availability. The mechanistic assessment of O₃-induced injury is a valuable approach for a biologically relevant O₃ risk assessment for forest trees.     

Improving ozone modeling in complex terrain at a fine grid resolution: Part I – examination of analysis nudging and all PBL schemes associated with LSMs in meteorological model

Meteorological variables such as temperature, wind speed, wind directions, and Planetary Boundary Layer (PBL) heights have critical implications for air quality simulations. Sensitivity simulations with five different PBL schemes associated with three different Land Surface Models (LSMs) were conducted to examine the impact of meteorological variables on the predicted ozone concentrations using the Community Multiscale Air Quality (CMAQ) version 4.5 with local perspective. Additionally, the nudging analysis for winds was adopted with three different coefficients to improve the wind fields in the complex terrain at 4-km grid resolution. The simulations focus on complex terrain having valley and mountain areas at 4-km grid resolution. The ETA M–Y (Mellor–Yamada) and G–S (Gayno–Seaman) PBL schemes are identified as favorite options and promote O₃ formation causing the higher temperature, slower winds, and lower mixing height among sensitivity simulations in the area of study. It is found that PX (Pleim–Xiu) simulation does not always give optimal meteorological model performance. We also note that the PBL scheme plays a more important role in predicting daily maximum 8-h O₃ than land surface models. The results of nudging analysis for winds with three different increased coefficients' values (2.5, 4.5, and 6.0 × 10^?4 s^?1) over seven sensitivity simulations show that the meteorological model performance was enhanced due to improved wind fields, indicating the FDDA nudging analysis can improve model performance considerably at 4-km grid resolution. Specifically, the sensitivity simulations with the coefficient value (6.0 × 10^?4) yielded more substantial improvements than with the other values (2.5 and 4.5 × 10^?4). Hence, choosing the nudging coefficient of 6.0 × 10^?4 s^?1 for winds in MM5 may be the best choice to improve wind fields as an input, as well as, better model performance of CMAQ in the complex terrain area. As a result, a finer grid resolution is necessary to evaluate and access of CMAQ results for giving a detailed representation of meteorological and chemical processes in the regulatory modeling. A recommendation of optimal scheme options for simulating meteorological variables in the complex terrain area is made.     

Adsorption characteristics of Cu2+ and Zn2+ from aqueous solution using carbonized food waste

The aim of the present study was to analytically provide adsorption characteristics of Cu²⁺ and Zn²⁺ using carbonized food waste (CFW); more specifically, batch tests were conducted using various concentrations of metal ions, contact times, and initial pH levels in an attempt to understand the adsorption removal of heavy metal ions in aqueous solution at concentrations ranging between 50 and 800 mg/l. The results confirmed that the adsorption equilibrium was established within a maximum of 80 min, and the maximum concentrations for adsorption of Cu²⁺ and Zn²⁺ were 28.3 and 23.5 mg/g, respectively. These adsorption levels indicate that CFW has better performance than many other adsorbents. In experiments using different pH conditions, the applicability to acid wastewater was found to be high, and an excellent adsorption removal ratio of 75%–90% was observed under acid conditions at pH 2–4. Furthermore, as the adsorption time increased, the calcium component in the CFW began to leach into the aqueous solution and raise the pH, accordingly causing the removal of heavy metal ions partially as a result of precipitation. When our results were analyzed using the Langmuir model and the Freundlich model for isothermal adsorptivity, the activity of CFW in this study was shown to be more consistent with the former; the adsorption speed of Cu²⁺ and Zn²⁺ according to a pseudosecond-order reaction model was found to be very fast for an initial concentration of not more than 100 mg/l. In a test in which an attempt was made to compare adsorption capacity values obtained from the experiments in this study with the aforementioned three models, the pseudosecond-order reaction model was found to provide results closest to the actual values.     

Volatile Organic Compounds in Ambient Air at Four Residential Locations in Seoul, Korea

To investigate the environmental behavior of volatile organic compounds (VOCs) in urban areas, their concentrations were measured at four urban monitoring sites (namely, N, S, E, and W) in Seoul, Korea (February to December 2009). A total of 27 compounds were quantified that consist of four chemical groups: aromatic (AR), halogenated aromatic, halogenated paraffin, and halogenated olefin. Results were evaluated by focusing on these four functional groups just mentioned and their summation term as total VOC (TVOC) along with several individual species (mainly AR species, that is, benzene, toluene, ethylbenzene, and xylene). The highest concentration of chemical groups was found from AR (71.1±42.1?ppbC), while that for individual species confirmed the dominance of toluene (7.48±3.88?ppb). The analysis of spatial distribution indicated that high TVOC levels were recorded at sites N and W, while it was not so significant such as S and E in terms of TVOC budget. Seasonal variation of these VOCs was characterized by the peak values in December to reflect the combined effects of pronounced source activities and meteorological conditions. Analysis of spatial variations in VOC levels between the four urban sites indicated that their distributions are tightly affected by local source processes in each area.     

Examination of Critical Factors Related to Summer Chlorophyll a Concentration in the Sueo Dam Reservoir, Republic of Korea

This study examined critical factors related to the short-term variation of algae growth in reservoirs during the summer. To this end, statistical tests were carried out at a small dam reservoir to determine how chemical factors (e.g., nutrient concentrations) and physical factors (e.g., theoretical and relative residence times, temperature) influenced the chlorophyll a (Chl-a) concentration. Statistical tests revealed that, although phosphorus (P) concentration was significant for Chl-a, residence time had much stronger relationship to Chl-a concentration than chemical factors. In addition, the study verified that relative residence time (RRT) best explained the relation of water status to algae growth. RRT was found to be useful in identifying water status related to the summer algae bloom. Finally, this study raised the possibility of inhibiting summer algae growth by operating dam reservoirs moderately. These findings need to be seriously considered when reservoir operators establish effective strategies for water quality management in summer.     

Transportation noise and exposed population of an urban area in the Republic of Korea

Using noise prediction models, we explored the transportation noise levels of Youngdeungpo-gu, an urbanized area of Seoul Metropolitan City in the Republic of Korea. In addition, we estimated the population exposed to transportation noise levels and determined how many people are vulnerable to noise levels that would cause serious annoyance and sleep disturbance. Compared with the World Health Organization [WHO] recommended levels, the daytime and nighttime transportation noise levels were still high enough to have the two psychosocial effects on people when considering the recommended levels of the World Health Organization (WHO; 55 decibels [dB[A]] and 40 dB[A] for daytime and nighttime, respectively). Particularly, nighttime transportation noise was discovered to be harmful to a wider area and more people than daytime noise. Approximately 91% of the Youngdeungpo-gu area experienced nighttime transportation noise levels exceeding those recommended by WHO. It was estimated that as much as 80% of the people in the study area were exposed to transportation noise levels >40 dB[A] during nighttime. Taking this into account, there is an urgent need to control and reduce transportation noise levels in Seoul, to protect residents against the potential ill health effects caused by urban transportation.     

Formation of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) from a refinery process for zinc oxide used in feed additives: a source of dioxin contamination in Chilean pork

The Republic of Korea found dioxin at concentrations exceeding the Korean maximum residue limit (MRL) in pork (2 pg TEQ g⁻¹ fat) imported from Chile in June 2008. Korea and Chile collaborated and investigated to find out the sources of contamination. An isotope dilution method and high resolution gas chromatography/mass spectrometry (HR-GC/MS) were used for the analysis of PCDD/Fs. PCDD/Fs were found from 2.17 to 36.7 pg TEQ g⁻¹ fat from Chilean pork. 2,3,4,7,8-PeCDF, 1,2,3,4,7,8-HxCDF, 1,2,3,6,7,8-HxCDF, and 2,3,4,6,7,8-HxCDF were found as the major congeners in pork samples. 2,3,4,7,8-PeCDF showed the highest concentration and contributed about 30% among the congeners in most of the samples. 2,3,7,8-TCDD, 1,2,3,7,8,9-HxCDD, OCDD, 2,3,7,8-TCDF, 1,2,3,7,8-PeCDF, 1,2,3,7,8,9-HxCDF, and OCDF were not detected or exist at background levels in the less contaminated samples. Remarkably high concentrations of PCDD/Fs were found in samples of zinc oxide (17 147 pg TEQ g⁻¹), zinc oxide based premix (6673 pg TEQ g⁻¹), and the residue crust (800 pg TEQ g⁻¹) in a mixing chamber in the feed mill. From the results of various investigations, this case concluded that zinc oxide in the feed was the major source of the dioxin contamination in pork. The dioxins were formed from a metal refinery process to collect zinc oxide.     

Contamination and bioaccumulation of benzotriazole ultraviolet stabilizers in fish from Manila Bay, the Philippines using an ultra-fast liquid chromatography-tandem mass spectrometry

Methyl methacrylate (MMA) is grafted on multiwalled carbon nanotubes (MWCNTs) by using N₂ plasma technique. The MMA grafted MWCNTs (MWCNT-g-pMMA) are characterized by using Raman spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, thermo gravimetric analysis-differential thermal analysis (TGA-DTA), and potentiometric acid-base titration method. The application of MWCNT-g-pMMA in the removal of 4,4′-dichlorinated biphenyl (4,4′-DCB) from large volumes of aqueous solutions is investigated under ambient conditions. The results indicate that the adsorption of 4,4′-DCB on MWCNT-g-pMMA is much higher than that of 4,4′-DCB on MWCNTs, and the adsorbed 4,4′-DCB is difficult to be thermally decomposed from MWCNT-g-pMMA according to the TGA-DTA analysis. MWCNT-g-pMMA are suitable materials in the preconcentration and immobilization of polychlorinated biphenyls (PCBs) from large volumes of aqueous solutions in environmental pollution cleanup.