PCDDs, PCDFs, and PCBs concentrations in breast milk from two areas in Korea: body burden of mothers and implications for feeding infants

We determined breast milk concentration of polychlorinated dibenzo-p-dioxins (PCDDs)/polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) in 24 mothers living in Korea, and assessed the maternal body burden based on PCDDs/PCDFs and PCBs concentrations in breast milk and an infant intake rate through breast-feeding based on their concentration in breast milk. PCDDs/PCDFs and PCBs levels in breast milk from primipara mothers were found to be higher than those from multipara mothers. For total PCDDs/PCDFs TEQ level, 2,3,4,7,8-PeCDD was the predominant congener, and the proportion of 2,3,7,8-TCDD was less than 3% of total PCDDs/PCDFs TEQ level. For PCBs TEQ level, PCB-126 was the predominant congener. Maternal body burden levels of PCDDs/PCDFs and PCBs based on their concentrations in breast milk were 268-622 TEQ ng. The daily dioxin intakes of mothers were predicted to be 0.78-2.18 TEQ pg/kg/day for PCDDs/PCDFs and 0.34-0.66 TEQ pg/kg/ day for PCBs. For the first year, the body burden of an infant was predicted to be 212 TEQ ng and the daily intake of an infant was predicted to be 85 TEQ pg/kg/day, assuming the mean dioxin-related compounds concentration (27.54 TEQ pg/g fat).     

Distribution characteristics of PCBs in the sediments of the lower Nakdong River, Korea

The objective of this study is to investigate the distribution characteristics of polychlorinated biphenyl (PCB) congeners in sediments of the lower Nakdong River of Korea. The sediments were collected using a grab sampler in May 1999. PCBs were extracted in the Soxhlet extractor and cleaned by using adsorption chromatographic techniques and concentrated sulfuric acid. A HP6890 gas chromatograph equipped with an electron capture detector was used for quantification. The results of congener specific analysis showed that the total concentration is ranged over 1.1-141 ng/g dry weight. The levels of PCB congeners are significantly correlated with the total organic carbons (TOC) in the sediments. The major fractions of PCBs in these sediments are congeners containing 4, 5 or 6 chlorine atoms per biphenyl molecule.     

Microcosm studies of microbial degradation in a coal tar distillate plume

Investigation of a groundwater plume containing up to 24 g l(-1) phenolic compounds suggested that over a period of nearly 50 years, little degradation had occurred despite the presence of a microbial community and electron acceptors within the core of the plume. In order to study the effect of contaminant concentration on degradation behaviour, laboratory microcosm experiments were performed under aerobic and anaerobic conditions at four different concentrations obtained by diluting contaminated with uncontaminated groundwater. The microcosms contained groundwater with total phenols at ca. 200, 250, 660 and 5000 mg l(-1), and aquifer sediment that had been acclimatised within the plume for several months. The microcosms were operated for a period of 390-400 days along with sterile controls to ascertain whether degradation was microbially mediated or abiotic. Under aerobic conditions, degradation only occurred at concentrations up to 660 mg l(-1) total phenols. At phenol concentrations below 250 mg l(-1) a benzoquinone intermediate, thought to originate from the degradation of 2,5-dimethylphenol, was isolated and identified. This suggested an unusual degradative pathway for this compound; its aerobic degradation more commonly proceeding via catecholic intermediates. Under anaerobic conditions, degradation only occurred in the most dilute microcosm (total phenols 195 mg l(-1)) with a loss of p-cresol accompanied by a nonstoichiometric decrease in nitrate and sulphate. By inference, iron(III) from the sediment may also have been used as a terminal electron acceptor, in which case the amount of biologically available iron released was calculated as 1.07 mg Fe(III)/g of sediment. The study shows that natural attenuation is likely to be stimulated by dilution of the plume.     

Salmonella enterica serovar Typhimurium hilA-lacZY fusion gene response to iron chelation or supplementation in rich and minimal media

Virulence expression of Salmonella enterica serovar Typhimurium under iron limited condition was measured by beta-galactosidase (beta-gal) assay using a hilA-lacZY fusion strain and calculated as Miller units. hilA-lacZY beta-galactosidase assays were performed in brain heart infusion (BHI) and minimal media (M9), after iron chelation with 2, 2-dipridyl and iron-supplementation respectively. Before performing virulence assays, concentrations of iron in the media were estimated using ferrozine. Iron content was found to be more in BHI (42.6 microg dL(-1)) as compared to M9 (10.03 microg dL(-1)). beta-gal activity of Salmonella Typhimurium in BHI was generally less than that observed in M9. After exposure to various combinations of iron chelator in BHI, hilA-lacZY activity only increased at the highest concentration of chelator (2001 microM) but decreased in M9 media for all iron concentrations when compared to controls with no iron amendment. These results indicate that iron availability may influence S. Typhimurium hilA expression.     

Modification of Langmuir isotherm in solution systems--definition and utilization of concentration dependent factor

The Langmuir isotherm, originally derived for the adsorption of gas molecules on solid surfaces, was modified to fit the adsorption isotherm of solutes onto solid surfaces in solution systems. The aim of this modification is based on the fact that direct application of the Langmuir isotherm to solution systems often leads to poor data fitting. In the present communication, it is shown that the level of data fitting to the Langmuir isotherm of literature data can be improved by a simple modification introducing a concentration dependent factor, X. The key concept of the modification lies in that the concentration of solute affects both adsorption and desorption stages. As a first approximation, we adopted a single-term polynomial for both processes of adsorption and desorption. Based on reanalysis of literature data of adsorption in solution, we confirmed that indeed the modified Langmuir isotherm more accurately describes the experimental observations. Furthermore, we proposed that the concentration dependent factor could be associated with the surface heterogeneity index that was introduced in a few other modified Langmuir isotherms. Some advantages and limitations of proposed modified Langmuir isotherm are also discussed.     

Comparison of spontaneous antibiotic resistance frequency of Salmonella Typhimurium growth in glucose amended continuous culture at slow and fast dilution rates

The objective of the study was to determine the frequency of spontaneous acquisition of resistance to select antibiotics by Salmonella Typhimurium (ST) when grown in glucose amended continuous flow culture at slow (D = 0.025 h(-1)) or fast (D = 0.27 h(-1)) dilution rates. The bacterium was grown in LB minimal medium (pH 6.25) containing no antibiotics. Upon achieving steady state, samples were plated to tryptic soy agar (TSA) alone or supplemented (per ml) with 2 and 16 microg oxytetracycline, 4 and 16 microg tetracycline, 2 and 64 microg kanamycin, and 0.25 and 2 microg enrofloxacin. Regardless of growth rate, CFU of resistant ST from the TSA containing antibiotics was less than 2 x 10(1) except for 2 microg kanamycin and 0.25 microg enrofloxacin treatments (higher than 1 x 10(9) and 4 x 10(7) CFU of resistant ST for trials 1 and 2, respectively). Frequency of recovering resistant ST from the TSA containing the higher antibiotic concentrations was less than 1 in 10(9) for all antibiotics, but was higher on the media containing 2 microg kanamycin and 0.25 microg enrofloxacin at both slow and fast growth rates. In general, minimal susceptibility differences were detected for isolates from slow and fast dilution rates.     

Levels of PCDDs and PCDFs in Korean river sediments and their detection by biomarkers

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are a group of toxic halogenated aryl hydrocarbons inducing various physiological disorders against biological organisms. Here, we investigated their levels in sediment samples taken from 12 different rivers in Korea. The levels of PCDD/PCDFs in sediment samples were expressed as concentrations and international TEQ values. Among 17 PCDD/PCDFs selected as target compounds in this study, the 1,2,3,4,7,8-HxCDD and OCDD were found in all river sediments with significant variation in various congener profiles of PCDD/PCDFs in sediments. PCDD/PCDFs could be monitored by sensitive biomarkers using insect immune system. Out of 12 river sediment samples, the biomarkers reported four spots (up, middle, and down Singil sites and Ansan) as putative contamination areas. When comparing both chemical and biological monitoring results, two methods agreed three spots of Singil as contamination areas (above 10ppt levels) as well as six river sediment samples as relatively less-contaminated areas, but differed in the results in Ansan and Miho, probably due to relative non-specificity of biomarkers. Despite some disparity between bio- and chemical monitoring results, the biomarkers can be recommended as a device warning the contamination of dioxins in the environment because of a fast and inexpensive detection method.     

Comparative toxicity of silver nanoparticles and silver ions to Escherichia coli

With the increase in silver(Ag)-based products in our lives, it is essential to test the potential toxicity of silver nanoparticles(Ag NPs) and silver ions(Ag ions) on living organisms under various conditions. Here, we investigated the toxicity of Ag NPs with Ag ions to Escherichia coli K-12 strain under various conditions. We observed that both Ag NPs and Ag ions display antibacterial activities, and that Ag ions had higher toxicity to E. coli K-12 strain than Ag NPs under the same concentrations. To understand the toxicity of Ag NPs at a cellular level, reactive oxygen species(ROS) enzymes were detected for use as antioxidant enzymatic biomarkers. We have also studied the toxicity of Ag NPs and Ag ions under various coexistence conditions including: fixed total concentration, with a varied the ratio of Ag NPs to Ag ions; fixed the Ag NPs concentration and then increased the Ag ions concentration; fixed Ag ions concentration and then increasing the Ag NPs concentration.Exposure to Ag NPs and Ag ions clearly had synergistic toxicity; however, decreased toxicity(for a fixed Ag NPs concentration of 5 mg/L, after increasing the Ag ions concentration) to E. coli K-12 strain. Ag NPs and Ag ions in the presence of L-cysteine accelerated the bacterial cell growth rate, thereby reducing the bioavailability of Ag ions released from Ag NPs under the single and coexistence conditions. Further works are needed to consider this potential for Ag NPs and Ag ions toxicity across a range of environmental conditions.Environmental Significance Statement: As silver nanoparticles(Ag NPs)-based products are being broadly used in commercial industries, an ecotoxicological understanding of the Ag NPs being released into the environment should be further considered. Here, we investigate the comparative toxicity of Ag NPs and silver ions(Ag ions) to Escherichia coli K-12 strain, a representative ecotoxicological bioreporter. This study showed that toxicities of Ag NPs and Ag ions to E. coli K-12 strain display different relationships when existing individually or when coexisting, and in the presence of L-cysteine materials. These findings suggest that the toxicology research of nanomaterials should consider conditions when NPs coexist with and without their bioavailable ions.     

Evaluating the e ects of granular and membrane filtrations on chlorine demand in drinking water

In this study, chlorine decay experiments were conducted for the raw water from Nakdong River that is treated by Chilseo Water Treatment Plant (CWTP) situated in Haman, Korea as well as the e uents from sand and granular activated carbon (GAC) filters of CWTP and fitted using a chlorine decay model. The model estimated the fast and slow reacting nitrogenous as well as organic/inorganic compounds that were present in the water. It was found that the chlorine demand due to fast and slow reacting (FRA and SRA) organic/inorganic substances was not reduced significantly by sand as well as GAC filters. However, the treated e uents from those filters contained FRA and SRA that are less reactive and had small reaction rate constants. For the e uents from microfiltration, ultrafiltration, and nanofiltration the chlorine demand because FRA and SRA were further reduced but the reaction rate constants were larger compared to those of sand and GAC filter e uents. This has implications in the formation of disinfection by products (DBPs). If DBPs are assumed to form due to the interactions between chlorine and SRA, then it is possible that the DBP formation potential in the e uents from membrane filtrations could be higher than that in the e uents from granular media filters.     

Characteristics of contaminants in water and sediment of a constructed wetland treating piggery wastewater effluent

Constructed wetland (CW) is the preferred means of controlling water quality because of its natural treatment mechanisms and function as a secondary or tertiary treatment unit. CW is increasingly applied in Korea for secondary effluent of livestock wastewater treatment. This study was conducted to recognize the characteristics of contaminants in the accumulated sediment at the bottom soil layer and to reduce the phosphorus release from sediments of the free water surface CW for the treatment of secondary piggery wastewater effluent from a livestock wastewater treatment facility. The results revealed that the dominant phosphorus existence types at near the inlet of the CW were non-apatite phosphorus (59%) and residual phosphorus (32%) suggesting that most of the particles of the influent are made up of inorganic materials and dead cells. Sediment accumulation is important when determining the long-term maintenance requirements over the lifetime of CW. Continuous monitoring will be performed for a further assessment of the CW system and design.