Modeling Hydrological and Environmental Consequences of Climate Change and Urbanization in the Boise River Watershed,Idaho

The potential impacts driven by climate variability and urbanization in the Boise River Watershed (BRW), located in southwestern Idaho, are evaluated. The outcomes from Global Circulation Models (GCMs) and land use and land cover (LULC) analysis have been incorporated into a hydrological and environmental modeling framework to characterize how climate variability and urbanization can affect the local hydrology and environment at the BRW. The combined impacts of future climate and LULC change are also evaluated relative to the historical baseline conditions. For modeling exercises, Hydrological Simulation Program‐Fortran (HSPF) is used in parallel computing and statistical techniques, including spatial downscaling and bias correlation, are employed to evaluate climate consequences derived from GCMs as well. The implications of climate variability and land use change driven by urbanization are then observed to evaluate how these overall global challenges can affect water quantity and quality conditions at the BRW. The results show the combined impacts of both climate change and urbanization can lead to more seasonal variability of streamflow (from ?27.5% to 12.5%) and water quality, including sediment (from ?36.5% to 49.3%), nitrogen (from ?24% to 124.2%), and phosphorus (from ?13.3% to 21.2%) during summer and early fall over the next several decades.     

Remediation of PCB‐Contaminated Soil Using Extraction and Destruction: Bench‐Scale Test

Polychlorinated biphenyls (PCBs) are a persistent environmental issue worldwide. This study summarizes the results obtained from a bench‐scale test of remediating PCB‐impacted soil. The research aimed to evaluate the effectiveness of extracting the PCB Aroclor 1260 from soil, transferring it to a liquid matrix, and then treating the PCB‐containing liquid using an Activated Metal Treatment System, a technology developed by NASA based on zero valent magnesium (ZVMg). The soil was from a former electrical plant area impacted by PCBs. The initial concentration of untreated soil contained an average of 4.7 ± 0.15 mg/kg of Aroclor 1260. The results showed that the mass transfer phenomena is possible using ethanol as a liquid matrix, reaching transfer results up to 93 percent. The ZVMg enabled the destruction of the Aroclor 1260, which reached 20 percent without any buildup of undesirable by‐products, such as less chlorinated PCBs.  ©2016 Wiley Periodicals, Inc.     

Increased 3HV Concentration in the Bacterial Production of 3-Hydroxybutyrate (3HB) and 3-Hydroxyvalerate (3HV) Copolymer with Acid-Digested Rice Straw Waste

Bacterial synthesis of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) copolymer [P(3HB-co-3HV)] using the hydrolysate of rice straw waste as a carbon source was affected by the composition of the hydrolysate, which depends highly on the rice straw pretreatment condition. Acid digestion with 2 % sulfuric acid generated larger production of P(3HB-co-3HV) than 6 % sulfuric acid, but 3HV concentration in the copolymer produced with 2 % acid hydrolysate was only 8.8 % compared to 18.1 % with 6 % acid hydrolysate. To obtain a higher 3HV mole fraction for enhanced flexibility of the copolymer, an additional heating was conducted with the 2 % acid hydrolysate after removal of residual rice straw. As the additional heating time increased a higher concentration of levulinic acid was generated, and consequently, the mole fraction of 3HV in P(3HB-co-3HV) increased. Among the conditions tested (i.e., 20-, 40-, 60-min), 60-min additional heating following 2 % sulfuric acid digestion achieved the highest 3HV mole fraction of 22.9 %. However, a longer heating time decreased the P(3HB-co-3HV) productivity, probably due to the increased intermediates concentrations acting as inhibitors in the hydrolysates. Therefore, the use of additional heating needs to consider both the increase in the 3HV mole fraction and the decrease in the P(3HB-co-3HV) productivity.     

Potential methane yield of food waste/food waste leachate from the biogasification facilities in South Korea

This study was to find out potential of methane yield on food waste and food waste leachate as biomass in Korea. The seven biogasification facilities were selected for comparison of theoretical methane yield and actual methane yield. The theoretical methane yield was calculated based on organic constituents (carbohydrate, protein, fat) and based on element analysis. The actual methane yield was investigated based on volatile solids and CODcr. Theoretical methane yields by organic constituents were 0.52 Sm³CH₄/kg VS and 0.35 Sm³CH₄/kg CODcr and these by element analysis were 0.53 Sm³CH₄/kg VS and 0.36 Sm³CH₄/kg CODcr. Actual methane yields were 0.36 Sm³CH₄/kg VS_in and 0.26 Sm³CH₄/kg CODcr_in. Considering the average removal efficiency of organic materials of seven FWL biogasification facilities, actual methane yields were 0.48 Sm³CH₄/kg VS_rem and 0.33 Sm³CH₄/kg CODcr_rem. Methane yield by organic constituents is very similar to that by element analysis and actual methane yields of volatile solids and CODcr were similar to theoretical value. The actual methane yield in this study showed approximated boundary values with previous other references which conducted in lab-scale or biochemical methane potential (BMP) tests. In conclusion, Korean food waste and food waste leachate have sufficient potential of methane yield in the ongoing biogasification facilities.     

Evaluation on the applicability of dry processed bottom ash as lightweight aggregate for construction fields

Currently, wet bottom ash is not sufficiently utilized due to its content of unburned coal, chloride and moisture. In contrast, bottom ash discharged from the recently introduced dry process spends a longer time on the clinker conveyer in the lower part of the boiler and consequently contains a significantly smaller amount of unburned coal. Consequently, it has high potential for use as a lightweight aggregate for construction material because of properties such as high porosity, low unburned coal content, non-chloride, and non-moisture. However, it is not frequently used for construction because the ash particle has a flat and thin shape, coarse surface and unfavorable structural strength. Against this backdrop, this study has conducted a range of experiments to identify the shapes, structure, density, absorption, percentage of floating particles, unit volume weight, solid volume, characteristics of air bubbles and micro pores, crushing strength of bottom ash, and the following results were observed. Though the dry bottom ash has sharp and angular edges, its flat and thin shapes lead to vulnerable structures. Dry bottom ash of the size of 0.6 mm or larger has 50–60 % of the total pore rate and 30–50 % of the closed pore rate. Considering these qualities, by removing the relatively fragile surface parts and making the particles more globular, dry bottom ash can be used as a lightweight aggregate for construction field having outstanding performance in terms of light weight and insulation.     

Evaluation of pliers’ grip spans in the maximum gripping task and sub-maximum cutting task

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.     

Unraveling the impact of workforce age diversity on labor productivity: The moderating role of firm size and job security

Previous literature has suggested both positive and negative effects of age diversity on labor productivity: positive because of the potential knowledge complementarities between employees of different ages and negative because of the age‐related value differences that might reduce cohesion and cooperation, hampering firm performance. Using a Belgian sample of 5892 organizational observations (2008–2011), we unraveled these countervailing effects in two ways. First, we built on prior studies to suggest that the effect of age diversity depends on the particular shape of the age distribution: positive when it is heterogeneous (i.e., variety) and negative when it is polarized (i.e., polarization). This was supported by our findings. Second, we explored the moderating impact of two contextual contingencies, firm size and job security. As expected, the positive effect of age variety is reinforced in large firms and in firms where job security is high. Although firm size also emphasizes the negative effect of age polarization on productivity, job security, unexpectedly, does not moderate this relationship. Our study offers a valuable contribution to the literature as it reveals the boundary conditions of the competing implications of age diversity and, thus, allows one to account for the inconclusive findings reported in previous literature. Copyright © 2015 John Wiley & Sons, Ltd.     

Examining strategic sustainability plans and smart-growth land-use measures in California cities

Given many potential obstacles, what types of strategic plans and measures for climate protection and/or energy sustainability are more likely than others to be adopted by cities? What are the key internal and external obstacles to adopting and implementing these plans and measures? Based on data obtained from a survey conducted from 2010 to 2011 and other sources, this paper develops a framework derived from political contracting theory and strategic orientation literature to examine how public management obstacles, socio-economic factors, and political factors influence a city's likelihood of having strategic energy sustainability plans and measures in place. Moreover, this paper finds that many California cities remain reluctant to require residents and businesses to comply with more challenging sustainability measures, such as smart-growth land-use practices, and that those cities with a strategic energy sustainability plan already in place tend to be more willing to adopt smart-growth land-use measures.     

Community reactions to tourism development: how does governmental fairness work?

Based on the elements of social exchange and organizational justice theories, a conceptual model and associated hypotheses were formulated to examine the relationship among community residents and their perceptions of governmental fairness (i.e., distributive, procedural, interpersonal, and informational dimensions), social capital (i.e., cognitive and structural dimensions), and support for government and environmental development. Data were collected from 496 residents in four Korean cities: Busan, Gyeongju, Pohang, and Ulsan. Empirical testing resulted in support for multiple hypotheses. More specifically, cognitive social capital was significantly influenced by distributive, interpersonal, and informational fairness. Structural social capital was significantly affected by distributive and informational fairness. Subsequently, two dimensions of social capital positively influenced two types of support. Overall, the results suggest that the interplay of governmental fairness and social capital is important in influencing residents’ support for government and environmental development.     

Access for all? Beach access and equity in the Detroit metropolitan area

Beaches are a unique type of recreation setting, offering a variety of water- and land-based opportunities that can meet residents’ diverse and complex recreation needs. Providing and improving equitable access to recreation amenities such as beaches have been recognized as essential responsibilities of public leisure agencies. This study assessed the degree of equity inherent in the distribution of public beaches in the Detroit metropolitan area; to account for spatial effects, phenomena rarely considered in prior equity analyses, geographically weighted regression was employed. Considerable local variations in the relationships between level of access to public beaches and population density, proportion of elderly population and educational attainment were identified. Such findings can help parks and recreation agencies better understand local patterns of equity, an important first step in facilitating the formulation of more efficient and effective planning and policy approaches.