Parasitism as a determinant of community structure on intertidal flats

The burrowing and movement ability of the New Zealand cockle Austrovenus stutchburyi is reduced when infected by echinostome trematodes. Previous experimental evidence from a single site suggests that this parasite-induced behavioural change of a key bivalve can affect the structure of the surrounding benthic community. By using multiple regression analyses on data collected from 17 intertidal flats, we here show that cockle parasitism is associated with macrozoobenthic community structure on a larger spatial scale. Regressions were performed for animal abundance, biomass, species diversity and species richness separately, entering cockle parasitism (infection intensity), presence/absence of ghost shrimps (Callianassa filholi), cockle density, primary producer abundance and organic content, particle size, sorting coefficient and gravel content of the substrate as predictors. Next to ghost shrimps, cockle parasitism was the best predictor of animal abundance by affecting (mainly positively) 8 of the 49 most widespread species significantly. Cockle parasitism was also associated with the biomass of anthozoans (positively), nemerteans (negatively) and bivalves (positively), whereas overall animal biomass was positively related to the sorting coefficient of the substrate. Species diversity was positively associated with cockle parasitism and gravel content of the substrate. Species richness was significantly associated with cockle parasitism (positively), ghost shrimps (negatively) and abundance of primary producers (positively) in combination. The impact of cockle parasitism on benthic community structure is believed governed directly or indirectly by (1) reduced sediment disturbance, (2) increased surface structural complexity and (3) availability of larval trematodes as an additional food source.     

Differences in Eye and Hand Movements of Novice and Experienced Press Operators

Presses are very widely used in industrial and commercial companies and are often the source of serious accidents occurring during operation. Most of the accidents are due to inadequate training of novice operators. Continuous recordings of eye and hand movements of five novice operators and five experienced operators in press operation were made. Significant difference between novice and experienced operators was observed in eye fixation time, eye movement patterns, hand dwell time, and eye-hand coordination. Also, differences were observed in spatial distribution of eye fixations during the die-closing portion of a stroke. There were no significant differences between novice and experienced operators in the eye and the hand movement time. The results could be used as basic data to establish a guide determining the method and training period to train novice operators.     

Charge reduction on polypropylene granules and suppression of incendiary electrostatic discharges by using a novel AC electrostatic ionizer

As a method to prevent or mitigate electrostatic charge and/or discharges, we have developed a novel AC electrostatic ionizer. In this study, we evaluated experimentally the practical version of the novel AC electrostatic ionizer with a modeling test system and a pneumatic powder transport facility. In addition, electrostatic discharges generated inside a silo while loading polypropylene (PP, 3 mm) granules were observed visually with/without the novel AC ionizer. The specific charge was clearly decreased with the novel AC electrostatic ionizer. The specific charge obtained with the four arranged AC electrostatic ionizers used was approximately one eighth of that without the AC ionizer. The incendiary bulk surface discharges completely died out inside the silo by using the four arranged ionizers.     

Overview of GHS (Globally Harmonized System) in Korea and the direction of further development

Many chemicals are being developed with the growth of science technology. Such chemicals bring many advantages to humans but also cause many social problems because of the hazards of the materials. Therefore, it is necessary to have a system which identifies the hazards of chemicals. Some acts or regulations about information on warning labels or MSDS (Material Safety Data Sheet) information for chemicals are similar in each country but there are differences in definitions of degree of hazard, standard classification of harmful level, and indication methods. GHS is the indication method of worldwide integrated classification standard in order to prevent damage caused by disease or risks of accidents resulting from confusion by the users. In keeping pace with the world trend, Korea has conducted translation of the GHS manual from UN and selected it as the official GHS manual of the Korean government. The official Korean GHS translated version was published in July 2005. After that, the Korea Ministry of Employment and Korea Labor and the Ministry of Environment have implemented GHS MSDS for chemical substances since July 1, 2010 so that manufacturers and importers are required to apply it. The full implementation for compound materials will start on July 1, 2013. In Korea, database information for chemicals is provided by four organizations including The Korea Occupational Safety and Health Agency. However, domestic information on chemicals provided by domestic information providers has problems including differences in basic content and incorrect recording because of trade secrets. Efforts for improvement including reinforcing training for manufacturers and importers on recording consistent information for different organizations are urgently needed.     

Key parametric analysis on designing an effective forced mitigation system for LNG spill emergency

Concerns over public safety and security of a potential liquefied natural gas (LNG) spill have promoted the need for continued improvement of safety measures for LNG facilities. The mitigation techniques have been recognized as one of the areas that require further investigation to determine the public safety impact of an LNG spill. Forced mitigation of LNG vapors using a water curtain system has been proven to be effective in reducing the vapor concentration by enhancing the dispersion. Currently, no engineering criteria for designing an effective water curtain system are available, mainly due to a lack of understanding of the complex droplet–vapor interaction. This work applies computational fluid dynamics (CFD) modeling to evaluate various key design parameters involved in the LNG forced mitigation using an upwards-oriented full-cone water spray. An LNG forced dispersion model based on a Eulerian–Lagrangian approach was applied to solve the physical interactions of the droplet–vapor system by taking into account the various effects of the droplets (discrete phase) on the air–vapor mixture (continuous phase). The effects of different droplet sizes, droplet temperatures, air entrainment rates, and installation configurations of water spray applications on LNG vapor behavior are investigated. Finally, the potential of applying CFD modeling in providing guidance for setting up the design criteria for an effective forced mitigation system as an integrated safety element for LNG facilities is discussed.     

Sudden high concentration of TSP affected by atmospheric boundary layer in Seoul metropolitan area during duststorm period

Hourly concentrations of TSP, PM(10), PM(2.5) near the surface at Seoul city were examined from March 20 to March 25, 2001 (duststorm event) in order to investigate the effect of a duststorm generated in China on the local aerosol concentration in Korea, The ratios of fine to coarse particles such as TSP to PM(10), TSP to PM(2.5) and PM(10)-PM(2.5) to PM(2.5) showed that a great amount of dust transported from the origin of the duststorm was remarkable with a maximum ratio of 9.77 between TSP and PM(2.5). Back trajectories every 6 h showed the movement of dust particles in the lower atmosphere near 500 m to 1500 m (atmospheric boundary layer), which implied transport from Baotou in inner Mongolia of northern China to the direction of Seoul city in Korea and then the back trajectories passed near the southern border of Mongolia and Baotou through Zengzhou in the midlevels (3000 m) and low levels (500 m) of China, finally reaching Seoul city. So, the TSP concentration at Seoul city was partially influenced by the duststorm, under the prevailing westerly wind and the transported aerosols could influence high concentrations of pollutants of TSP, PM(10) and PM(2.5) in Seoul. The sudden high concentrations of TSP and PM(10) were found for a few hours, especially at 1500 to 1800 LST, March 22. At 1200 LST, before the passage of a cold front through the Korean peninsula, the convective boundary layer (CBL) near Seoul was not shallow, but at 1500 LST, under the frontal passage, the CBL was remarkably thinner (less than 300 m), due to the compression of the boundary layer by the intrusion of cold air. This resulted in the increase of the TSP concentration, even though the mixed layer above maintained almost the same depth. At 1800 LST shortly after the frontal passage, that is, near sunset, the nocturnal cooling of the ground caused air parcels to cool, thereby enhancing the shallower nocturnal surface inversion layer and producing the maximum concentration of TSP of 1388 microg/m(3) near Seoul city.     

Nationwide survey on the natural radionuclides in industrial raw minerals in South Korea

A Nationwide survey on the natural radioactivity in industrial raw mineral commodities (17 kinds of domestic and 18 kinds of imported) that are representative minerals used in production and consumption in South Korea was conducted. The target industrial minerals can be categorized into two groups. The first group covers non-metallic and metallic raw minerals with low levels of radioactivity such as clay, silica sand, carbonates, bituminous and anthracite coal, iron ores, ilmenite, rutile, and phosphate ore. The other group comprises minerals with high levels of radioactivity including zircon and monazite. One hundred and sixty-four domestic and imported samples were analysed by gamma-ray spectroscopy using an HPGe detector. The (40)K content ranges from <0.00131 to 2.69Bq g(-1), and (226)Ra and (232)Th range over <0.0006 to 0.630 and <0.0008 to 0.474Bq g(-1), respectively. There was no anthropogenic radioactive signal in any of the samples.     

An efficient and simple method for measuring (226)Ra using the scintillation cell in a delayed coincidence counting system (RaDeCC)

A delayed coincidence counter (RaDeCC), developed to determine ultra-low levels of (223)Ra (half life = 11.1 days) and (224)Ra (half life = 3.6 days) in seawater, was adapted to measure (226)Ra (half life = 1622 years). After pre-concentration of Ra from seawater onto MnO(2)-coated fiber we show in this study that the (226)Ra activity can be determined using the RaDeCC's ability to record alpha decay of its daughters as total counts. For sufficient ingrowth of (222)Rn, the Mn-fiber is hermetically sealed in a column for a few days. Then, the ingrown (222)Rn is circulated through the RaDeCC air-loop system followed by shutting down of the pump and closure of the scintillation cell for equilibration. Counting may be completed within a few hours for seawater samples. Sample measurements with this method agreed well with data obtained using gamma-ray spectrometry. This proves that a set of Ra isotopes ((223)Ra, (224)Ra, and (226)Ra), commonly used for geophysical studies such as mixing rates of different water masses and submarine groundwater discharge, can be efficiently and rapidly measured using the RaDeCC.     

Simulating mesoscale transport and diffusion of radioactive noble gases using the Lagrangian particle dispersion model

In order to simulate the impact of mesoscale wind fields and to assess potential capability of atmospheric Lagrangian particle dispersion model (LPDM) as an emergency response model for the decision supports, two different simulations of LPDM with the mesoscale prognostic model MM5 (Mesoscale Model ver. 5) were driven. The first simulation of radioactive noble gas ((85)Kr exponent) emitted during JCO accident occurred from 30 September to 3 October 1999 at Tokai, Japan showed that the first arriving short pulse was found in Tsukuba located at 60km away from the accidental area. However, the released radioactive noble gas was transported back to the origin site about 2 days later due to the mesoscale meteorological wind circulation, enhancing the levels of (85)Kr with the secondary peak in Tsukuba. The second simulation of atmospheric dilution factors (the ratio of concentration to the emission rate, chi/Q), during the underground nuclear test (UNT) performed by North Korea showed that high chi/Q moved to the eastward and extended toward southward in accordance with the mesoscale atmospheric circulations generated by mesoscale prognostic model MM5. In comparison with the measurements, the simulated horizontal distribution patterns of (85)Kr during the JCO are well accord with that of observation in Tsukuba such as the existence of secondary peak which is associated with the mesoscale circulations. However, the simulated level of (85)Kr anomaly was found to be significantly lower than the observations, and some interpretations on these discrepancies were described. Applications of LPDM to two mesoscale emergency response dispersion cases suggest the potential capability of LPDM to be used as a decision support model provided accurate emission rate of accident in case of a large accident.     

Effects of NO,NO<Subscript>2</Subscript>, CO and SO<Subscript>2</Subscript> on NO oxidation over Pt/TiO<Subscript>2</Subscript> for hybrid fast SCR process

The selective catalytic reduction (SCR) rate of NO with N-containing reducing agents can be enhanced considerably by converting part of NO into NO₂. The enhanced reaction rate is more pronounced even at lower temperatures by using an equimolar mixture of NO and NO₂ (fast SCR reaction). The oxidation characteristics of NO over catalyst Pt/TiO₂ have been determined in a fixed bed reactor (8 mm-ID) with different concentrations of oxygen, nitric oxide and nitrogen dioxide in the presence of 8% water. The conversion of NO to NO₂ increases with increasing oxygen (O₂) concentration from 3 to 12%, but it levels off at higher O₂ concentrations. The NO conversion to NO₂ decreases with increasing NO concentration and it also decreases by an addition of NO₂ in the feed stream. Therefore, the oxidation of NO over Pt/TiO₂ catalyst could be auto-inhibited by the reaction product of NO₂. The effects of CO and SO₂ on NO oxidation characteristics have also been determined. In fact, the presence of SO₂ significantly suppresses oxidation of NO but due to the less stability of sulfate on anatase structure in TiO₂, it becomes less significant. On the other hand, the presence of CO increases NO oxidation significantly due to the auto-inhibition effect by CO. Moreover, the effect of SO₂/CO on NO oxidation has also been determined and it was observed that NO oxidation decreases with the increase in SO₂/CO ratio.