Biodegradation of pentyl amine and aniline from petrochemical wastewater

The objectives of the project were to isolate a bacterial strain capable of degrading pentyl amine and aniline and to define the optimal pentyl amine and aniline degradation conditions for this bacterial strain. The bacterial strain was isolated from activated sludge obtained from a Northeastern China treatment facility for petrochemical wastewater rich in pentyl amine and aniline. Once the strain was isolated, five triplicate (5) batch tests were used to establish the conditions for maximum pentyl amine and aniline degradation, by varying one at a time the following five factors: temperature, pH, reaction time, pollutant concentrations and aeration rate. In a final test, oil refinery sludge was inoculated with the strain and tested for the degradation of pentyl amine and aniline under optimal conditions, while observing the degradation pathway of pentyl amine and aniline. The isolated strain, PN1001, is a member of the Pseudomonas species and it was capable of degrading pentyl amine and aniline. The optimal reactor conditions for the degradation of a mixture of pentyl amine and aniline, at a concentration ranging between 150 and 200mg/L, were found to be 30 degrees C at a pH of 7.0, under a reaction time of 24h and a maximum solution dissolved oxygen level of 6 mgO(2)/L. Under such conditions, the strain PN1001 degraded 93% and 89% of the pentyl amine and aniline, respectively, aniline being more toxic and demonstrating a more complex degradation pathway. The strain PN1001 degraded more contaminants when both were present because of the pi and sigma electron cloud coordination functions of aniline and pentyl amine, respectively, presumed to reduce the toxic effect of aniline. Once inoculated with the strain, oil refinery sludge degraded 93% and 88% of the pentyl amine and aniline, compared to the strain alone which degraded 72% and 82%, likely because of the sludge's buffering effect against the toxic environment.     

Flying foxes cease to function as seed dispersers long before they become rare

Rare species play limited ecological roles, but particular behavioral traits may predispose species to become functionally extinct before becoming rare. Flying foxes (Pteropodid fruit bats) are important dispersers of large seeds, but their effectiveness is hypothesized to depend on high population density that induces aggressive interactions. In a Pacific archipelago, we quantified the proportion of seeds that flying foxes dispersed beyond the fruiting canopy, across a range of sites that differed in flying fox abundance. We found the relationship between ecological function (seed dispersal) and flying fox abundance was nonlinear and consistent with the hypothesis. For most trees in sites below a threshold abundance of flying foxes, flying foxes dispersed < 1% of the seeds they handled. Above the threshold, dispersal away from trees increased to 58% as animal abundance approximately doubled. Hence, flying foxes may cease to be effective seed dispersers long before becoming rare. As many species' populations decline worldwide, identifying those with threshold relationships is an important precursor to preservation of ecologically effective densities.     

Effects of copper (I) oxide on growth and biochemical compositions of two marine microalgae

In copper based antifouling (AF) paints Cu (I) oxide was largely used as booster biocide. In this study effect of Cu (I) oxide on two marine microalgae, Tetraselmis suecica and Dunaliella tertiolecta was demonstrated. EC50 (96 hr) concentrations estimated for T. suecica and D. tertiolecta were 1.3 mg l(-1) and 1.34 mg l(-1), respectively. Copper (I) oxide induced changes in growth, chlorophyll, carbohydrate and protein contents were observed in T. suecica and D. tertiolecta. At low concentration of 0.0625 mg l(-1), 3-26% and 1-16% growth stimulation was observed in T. suecica and T. tertiolecta respectively. Increasing Cu (I) oxide concentrations proportionately decreased the carbohydrate and protein contents. This study clearly indicates the toxicity of excessive Cu (I) oxide on growth and biochemical compositions of T. suecica and D. tertiolecta.     

Comparative assessment of coal tars obtained from 10 former manufactured gas plant sites in the eastern United States

A comparative analysis was performed on eleven coal tars obtained from former manufactured gas plant sites in the eastern United States. Bulk properties analyzed included percent ash, Karl Fisher water content, viscosity and average molecular weight. Chemical properties included monocyclic- and polycyclic-aromatic hydrocarbon (PAH) concentrations, alkylated aromatic concentrations, and concentrations of aliphatic and aromatic fractions. It was found that there was at least an order-of-magnitude variation in all properties measured between the eleven coal tars. Additionally, two coal tars obtained from the same manufactured gas plant site had very different properties, highlighting that there can be wide variations in coal tar properties from different samples obtained from the same site. Similarities were also observed between the coal tars. The relative chemical distributions were similar for all coal tars, and the coal tars predominantly consisted of PAHs, with naphthalene being the single-most prevalent compound. The C(9-22) aromatic fraction, an indicator of all PAHs up to a molecular weight of approximately 276 gmole(-1), showed a strong power-law relationship with the coal tar average molecular weight (MW (ct)). And the concentrations of individual PAHs decreased linearly as MW (ct) increased up to ca. 1000 gmole(-1), above which they remained low and variable. Implications of these properties and their variation with MW (ct) on groundwater quality are discussed. Ultimately, while these similarities do allow generalities to be made about coal tars, the wide range of coal tar bulk and chemical properties reported here highlights the complex nature of coal tars.     

A comparative assessment of heavy metal accumulation in soft parts and byssus of mussels from subarctic, temperate, subtropical and tropical marine environments

Existing data on metal concentrations in mussels from subarctic, temperate, subtropical and tropical waters were analyzed using multivariate statistics in order to assess regional variations in metal contamination. Potential errors were reduced by only analyzing data from surveys that employed the same protocols, analytical methodologies and analysts. Factor analysis demonstrated that mussels inhabiting extremely contaminated areas (e.g. from Japanese and Swedish metallurgy sources) could be separated from mussels from other contaminated areas, and that metals such as Cd, Pb, Cu and Zn could be used to identify heavily contaminated samples while Co, Fe, Cr and Ni concentrations were good markers for exposure to inputs from different industrial sources. Furthermore byssus, like soft tissue, selectively and sensitively reflects variations of certain metal concentrations in ambient waters and thus serves as a reliable biomonitor for these contaminants in a variety of coastal and estuarine areas.     

Determination of biodegradation potential by two culture-independent methods in PAH-contaminated soils

Biodegradation potentials of polycyclic aromatic hydrocarbons (PAHs) were determined with soil samples collected from various depths of a PAH-contaminated site and of a site nearby where PAHs were not found. Putative dioxygenase genes were amplified by a primer set specific for initial dioxygenases and identified by web-based database homology search. They were further categorized into several groups of which four dioxygenases were selected as probes for DNA hybridization. The hybridization signals according to the presence of putative dioxygenases were positively related to the extent of PAH contamination. However, the signal intensities varied depending on the probes hybridized and moreover were not consistent with PAH biodegradation activities determined by CO2 evolution. Despite widely accepted advantages of molecular biodegradation assessment, our data clearly present the variations of assessment results depending on the genetic information used and suggest that the methodology may tend to underestimate the real biodegradation capacity of a site probably due to the limited dioxygenase database available at the moment. Therefore, the molecular assessment of biodegradation potential should involve a very careful primer and probe design and an extensive microbiological examination of a site of interest to accurately delineate the biodegradation potential of the site.     

Biodegradation of methoxychlor and its metabolites by the white rot fungus Stereum hirsutum related to the inactivation of estrogenic activity

The white rot fungus Stereum hirsutum was used to degrade methoxychlor [2,2,2-trichloro-1,1-bis(4-methoxyphenyl)ethane] in culture and the degraded products were extensively determined. The estrogenic activity of the degraded products of methoxychlor was examined using cell proliferation and pS2 gene expression assays in MCF-7 cells. S. hirsutum showed high resistance to methoxychlor 100 ppm, and the mycelial growth was fully completed within 8 days of incubation at 30 degrees C. Methoxychlor in liquid culture medium was gradually converted into 2,2-dichloro-1,1-bis(4-methoxyphenyl)ethane, 2,2-dichloro-1,1-bis(4-methoxyphenyl)ethylene, 2-chloro-1,1-bis(4-methoxyphenyl) ethane, 2-chloro-1,1-bis(4-methoxyphenyl) ethylene, and 1,1-bis(4-methoxyphenyl)ethylene, indicating that methoxychlor is dominantly degraded by dechlorination and dehydrogenation. MCF-7 cells were demonstrated to proliferate actively at the 10-5 M concentration of methoxychlor. However, cell proliferation was significantly inhibited by the incubation with methoxychlor culture media containing S. hirsutum. In addition, the expression level of pS2 mRNA was increased at the concentration (10-5 M) of methoxychlor. The reductive effect of S. hirsutum for methoxychlor was clear but not significant as in the proliferation assay.     

A test of sequential extractions for determining metal speciation in sewage sludge-amended soils

Sequential extraction procedures are widely used to estimate the quantity of trace metals bound to different solid fractions in contaminated soils. However, reliability of speciation of trace metals by these procedures remains largely unexamined. In the present study, the selectivity of each extraction step was tested by observing the effect of reversing the extraction order in the procedure. Two different sequential extraction methods and their reversed modes were used for metal fractionation in sewage sludge-amended soils. Significantly increased amounts of extractable metals (Cd, Cu, Pb and Zn) were evident in the sludge-amended soils compared to control soil by all extraction schemes; however, the amounts of metals extracted by each step were strongly dependent on the order of extraction, the type of reagents and the nature of the individual metals. Caution is advised in deducing the forms of soil metals from sequential extraction results from metal-contaminated soils.     

Sources of fine particulate species in ambient air over lake Champlain Basin, VT

This study is a part of an ongoing investigation of the types and locations of emission sources that contribute fine particulate air contaminants to Underhill, VT. The air quality monitoring data used for this study are from the Interagency Monitoring of Protected Visual Environments network for the period of 2001-2003 for the Underhill site. The main source-receptor modeling techniques used are the positive matrix factorization (PMF) and potential source contribution function (PSCF). This new study is intended as a comparison to a previous study of the 1988-1995 Underhill data that successfully revealed a total of 11 types of emission sources with significant contributions to this rural site. This new study has identified a total of nine sources: nitrate-rich secondary aerosol, wood smoke, East Coast oil combustion, automobile emission, metal working, soil/dust, sulfur-rich aerosol type I, sulfur-rich aerosol type II, and sea salt/road salt. Furthermore, the mass contributions from the PMF identified sources that correspond with sampling days with either good or poor visibility were analyzed to seek possible correlations. It has been shown that sulfur-rich aerosol type I, nitrate aerosol, and automobile emission are the most important contributors to visibility degradation. Soil/dust and sea salt/road salt also have an added effect.