Investigation of adsorption characteristics of four toxic gases (nitric oxide,nitrogen dioxide,sulfur dioxide,and hydrogen chloride) on the inner surface of nickel-coated manganese steel cylinders and aluminum cylinders

To develop standard toxic gas mixtures, it is essential to identify adsorption characteristics of each toxic gas on the inner surface of a gas cylinder. Thus, this study quantified adsorbed amounts of the four toxic gases (nitric oxide [NO], nitrogen dioxide [NO₂], sulfur dioxide [SO₂], and hydrogen chloride [HCl]) on the inner surface of aluminum cylinders and nickel-coated manganese steel cylinders. After eluting adsorbed gases on the inside of cylinders with ultrapure water, a quantitative analysis was performed on an ion chromatograph. To evaluate the reaction characteristics of the toxic gases with cylinder materials, quantitative analyses of nickel (Ni), iron (Fe), and aluminum (Al) were also performed by inductively coupled plasma optical emission spectrometry (ICP-OES). It was found that the amounts of NO, NO₂, and SO₂ adsorbed on the inner surface of aluminum cylinders were less than 1.0% at the level of 100 μmol/mol mixing ratio, whereas the signal for most heavy metal elements were below their respective detection limits. This study found that the amounts of HCl adsorbed on the inner surface of nickel-coated manganese steel cylinders were less than 5% at the level of 100 μmol/mol mixing ratio, whereas Ni (86 μmol) and Fe (28 μmol) were detected in the same cylinders. It was revealed that the adsorption mainly took place via the reaction of HCl with inner surface material of nickel-coated manganese steel cylinders. On the other hand, in the case of aluminum cylinders, the amounts of the adsorption were determined to be less than 1% at the level of HCl 100 μmol/mol mixing ratio, whereas most of Ni, Fe, and Al were detected at levels similar to their limits of detection. As a result, this study found that aluminum cylinders are more suitable for preparing HCl gas mixtures than nickel-coated manganese steel cylinders.

Implications: To develop a standard toxic gas mixture, it is essential to understand the adsorption characteristics of each toxic gas inside a gas cylinder. It was found that the amounts of NO, NO₂, and SO₂ adsorbed inside aluminum cylinders were less than 1.0% at the level of 100 μmol/mol mixing ratio. The amounts of HCl adsorbed inside nickel-coated manganese steel cylinders were less than 5% at the level of 100 μmol/mol mixing ratio, whereas those inside aluminum cylinders were less than 1%, indicating that aluminum cylinders are more suitable for preparing HCl gas mixtures.     

PCDD and PCDF exposures in workers and controls living near an industrial waste incinerator

This study measured the levels of 17 congeners of PCDDs/PCDFs in serum to compare the levels between potentially exposed workers at an industrial waste incinerator and any residents with no known exposures. The 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDD were detected in serum of workers but in controls. Likewise, 1,2,3,7,8-PeCDF, 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDF were detected only in serum of workers. The international toxic equivalent (TEQ) levels of PCDDs/PCDFs in sera of workers are much higher than in controls. Among PCDDs, the proportion of total concentration and TEQ level is dominated predominantly by 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDD. We need extensive studies to estimate human exposure and are continuing this investigation.     

Microcosm studies of microbial degradation in a coal tar distillate plume

Investigation of a groundwater plume containing up to 24 g l(-1) phenolic compounds suggested that over a period of nearly 50 years, little degradation had occurred despite the presence of a microbial community and electron acceptors within the core of the plume. In order to study the effect of contaminant concentration on degradation behaviour, laboratory microcosm experiments were performed under aerobic and anaerobic conditions at four different concentrations obtained by diluting contaminated with uncontaminated groundwater. The microcosms contained groundwater with total phenols at ca. 200, 250, 660 and 5000 mg l(-1), and aquifer sediment that had been acclimatised within the plume for several months. The microcosms were operated for a period of 390-400 days along with sterile controls to ascertain whether degradation was microbially mediated or abiotic. Under aerobic conditions, degradation only occurred at concentrations up to 660 mg l(-1) total phenols. At phenol concentrations below 250 mg l(-1) a benzoquinone intermediate, thought to originate from the degradation of 2,5-dimethylphenol, was isolated and identified. This suggested an unusual degradative pathway for this compound; its aerobic degradation more commonly proceeding via catecholic intermediates. Under anaerobic conditions, degradation only occurred in the most dilute microcosm (total phenols 195 mg l(-1)) with a loss of p-cresol accompanied by a nonstoichiometric decrease in nitrate and sulphate. By inference, iron(III) from the sediment may also have been used as a terminal electron acceptor, in which case the amount of biologically available iron released was calculated as 1.07 mg Fe(III)/g of sediment. The study shows that natural attenuation is likely to be stimulated by dilution of the plume.     

Concentration and size distribution of ultrafine particles near a major highway

Motor vehicle emissions usually constitute the most significant source of ultrafine particles (diameter <0.1 microm) in an urban environment, yet little is known about the concentration and size distribution of ultrafine particles in the vicinity of major highways. In the present study, particle number concentration and size distribution in the size range from 6 to 220 nm were measured by a condensation particle counter (CPC) and a scanning mobility particle sizer (SMPS), respectively. Measurements were taken 30, 60, 90, 150, and 300 m downwind, and 300 m upwind, from Interstate 405 at the Los Angeles National Cemetery. At each sampling location, concentrations of CO, black carbon (BC), and particle mass were also measured by a Dasibi CO monitor, an aethalometer, and a DataRam, respectively. The range of average concentration of CO, BC, total particle number, and mass concentration at 30 m was 1.7-2.2 ppm, 3.4-10.0 microg/m3, 1.3-2.0 x 10(5)/cm3, and 30.2-64.6 microg/m3, respectively. For the conditions of these measurements, relative concentrations of CO, BC, and particle number tracked each other well as distance from the freeway increased. Particle number concentration (6-220 nm) decreased exponentially with downwind distance from the freeway. Data showed that both atmospheric dispersion and coagulation contributed to the rapid decrease in particle number concentration and change in particle size distribution with increasing distance from the freeway. Average traffic flow during the sampling periods was 13,900 vehicles/hr. Ninety-three percent of vehicles were gasoline-powered cars or light trucks. The measured number concentration tracked traffic flow well. Thirty meters downwind from the freeway, three distinct ultrafine modes were observed with geometric mean diameters of 13, 27, and 65 nm. The smallest mode, with a peak concentration of 1.6 x 10(5)/cm3, disappeared at distances greater than 90 m from the freeway. Ultrafine particle number concentration measured 300 m downwind from the freeway was indistinguishable from upwind background concentration. These data may be used to estimate exposure to ultrafine particles in the vicinity of major highways.     

Trace element concentration in tree-rings biomonitoring centuries of environmental change

Inductively coupled plasma mass spectrometry (ICP-MS) was used to examine trace element concentration in tree-rings over three and half centuries to assess macro-trends of environmental change. Tree-rings of a 350+ year old mammoth ponderosa pine (Pinus ponderosa) were analyzed for element concentration and evaluated versus local and global historical events. The ponderosa pine was located 100 miles south of the Canada/USA border and 180 miles east of the Pacific Ocean, and grew near apple orchards, a public road, and Swakane Creek in western Washington, USA. The elements tested did not all display the same time versus concentration patterns. Copper and chromium displayed cyclic concentration patterns over the last 350+ years, which appear to be associated with local events. Strontium, barium, zinc and cadmium were found to be relatively constant between the mid 1600s and the early 1800s. Strontium, barium, zinc, and cadmium then increased beginning in the early 1800s for approximately 50 years then decreased to present day 2000. Significantly, similar changes seen in Ca, Mg, and Zn in other studies have been attributed to acid rain, whereas, in our study area there is no history of anthropogenic acid rain. Most importantly, our data goes back to the mid-1600s several hundred years further back than most other studies of this nature. This additional time data provides for a better context of trend data not previously available.     

Pattern recognition of the movement tracks of medaka (Oryzias latipes) in response to sub-lethal treatments of an insecticide by using artificial neural networks

Specimens of medaka (Oryzias latipes) were observed continuously through an automatic image recognition system before and after treatments of an anti-cholinesterase insecticide, diazinon (0.1 mg/l), for 4 days in semi-natural conditions (2 days before treatment and 2 days after treatment). The "smooth" pattern was typically shown as a normal movement behavior, while the "shaking" pattern was frequently observed after treatments of diazinon. These smooth and shaking patterns were selected for training with an artificial neural network. Parameters characterizing the movement tracks, such as speed, degree of backward movements, stop duration, turning rate, meander, and maximum distance movements in the y-axis of 1-min duration, were given as input (six nodes) to a multi-layer perceptron with the back propagation algorithm. Binary information for the smooth and shaking patterns was separately given as the matching output (one node), while eight nodes were assigned to a single hidden layer. As new input data were given to the trained network, it was possible to recognize the smooth and shaking patterns of the new input data. Average recognition rates of the smooth pattern decreased significantly while those for the shaking pattern increased to a higher degree after treatments of diazinon. The trained network was able to reveal the difference in the shaking pattern in different light phases before treatments of diazinon. This study demonstrated that artificial neural networks could be useful for detecting the presence of toxic chemicals in the environment by serving as in-situ behavioral monitoring tools.     

Effects of in-situ ozonation on indigenous microorganisms in diesel contaminated soil: survival and regrowth

Soil column experiments were conducted to investigate the effects of chemical oxidation on the survival of indigenous microbes (i.e., heterotrophic microbes, phenanthrene-degrading microbes, and alkane-degrading microbes) for field soil contaminated with diesel fuel. Rapid decreases of total petroleum hydrocarbons (TPH) and aromatics of diesel fuel were observed within the first 60 min of ozone injection; after 60 min, TPH and aromatics decreased asymptotically with ozonation time. The three types of indigenous microbes treated were very sensitive to ozone in the soil column experiment, hence the microbial population decreased exponentially with ozonation time. The numbers of heterotrophic, alkane-degrading, and phenanthrene-degrading bacteria were reduced from 10(8) to 10(4), 10(7) to 10(3), and 10(6) CFU g soil(-1) to below detection limit after 900 min of ozonation, respectively. Except for the soil sample ozonated for 900 min, incubation of ozone-treated soil samples that were not limited by oxygen diffusion showed further removal of TPH. The soil samples that were ozonated for 180 min exhibited the lowest concentration of TPH and the highest regrowth rate of the heterotrophic and alkane-degrading populations after the 9 weeks of incubation.     

Specific accumulation of 20 trace elements in great cormorants (Phalacrocorax carbo) from Japan

This study is to elucidate the specific accumulation of 20 trace elements in tissues/organs of great cormorants from two different colonies (Lake Biwa and Mie) in Japan. In the body distribution of trace elements, some elements revealed tissue-specific accumulation such as most of the burden of Mo, Ag and Cd in liver, Tl and Cd in kidney, Cu, Rb and Cs in muscle, and V, Sr and Ba in bone. Gender-related variation was not observed in both populations for most of the trace elements, except for higher hepatic Sr in males from Lake Biwa. Hepatic V, muscular Hg and Tl, and Cd in liver, kidney and muscle increased with growth. Comparison of trace element levels in tissues between the two colonies showed that Cr, Rb, Sr, Cd, Cs, Ba and Tl levels were higher in Lake Biwa than in Mie, whereas Zn, Co and Hg in Mie samples were greater than Lake Biwa. Variations of elemental levels in stomach contents also showed similar patterns, thus, showing that dietary sources tended to be the main factor for these regional variations. Toxic Hg and Cd concentrations in the liver of cormorants from the two colonies were lower than those from other areas, implying relatively low exposure to these metals in the present study sites. Concentrations of V, Co, Ag, Cd, Cs, Hg, Tl, Pb and Bi in liver remained more or less at the same level between 1993 and 2003, while hepatic Cr, Mn, Cu, Zn, Se, Rb, Sr and Ba showed apparent decrease, which might be related to the biological factors.     

Evaluation of pliers’ grip spans in the maximum gripping task and sub-maximum cutting task

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.     

Mutagenic and carcinogenic potency of extracts from diesel related environmental emissions: Simultaneous morphological transformation and mutagenesis in BALB/c 3t3 cells

Particulate extracts from six different environmental emission sources were assayed for genotoxic activity in mouse BALB/c 3T3 clone A31-1 cells. All compounds were tested simultaneously for both transforming and mutagenic (induction of ouabain-resistance) potential with and without exogenous metabolic activation in the form of a 9000 × g postmitochondrial hepatic supernatant fraction from Aroclor-1254 induced Fischer 344 rats. Dichloromethane particulate extracts from the exhaust of two light duty diesel engines (Oldsmobile and Nissan), one heavy duty diesel engine (Caterpillar) and one late model gasoline engine (Mustang II) were assayed in an identical manner to particulate extracts from the emissions of a roofing tar pot and a coke oven. No clear dose-dependent responses were observed, but several of the samples showed significant transforming and mutagenic activity. A qualitative ranking system showed the activity of these particulate extracts for either mutagenesis or transformation was: coke oven = Mustang II gasoline engine > Nissan diesel engine > roofing tar. Particulate extracts from the Oldsmobile diesel engine and the Caterpillar diesel engine showed essentially no activity.