Effects of ocean acidification on the early developmental stages of the horned turban,Turbo cornutus

To estimate the impact of CO₂-driven ocean acidification on the early life stages of gastropods, the effects of increased partial pressure of seawater carbon dioxide (pCO₂) (800–2,000 μatm) on the early developmental stages and larval shell length of the commercially important gastropod, the horned turban snail, Turbo cornutus were investigated. Increase in experimental seawater pCO₂ had an increasingly negative impact on the early developmental rate; the proportion of embryos or larvae displaying retarded development increased at higher pCO₂. The proportion of embryos that developed to the 4-cell stage at 2 h after fertilization decreased linearly with increasing pCO₂. At ~1,000 μatm pCO₂, retarded development was observed in ~50 % of larvae. No embryos developed to the 4-cell stage at 2,000 μatm pCO₂ within 2 h of fertilization. A similar trend continued until 24–26 h after fertilization; the proportion of larvae attaining veliger stage by 24–26 h also decreased with increasing pCO₂. The shell length of T. cornutus veligers decreased gradually as seawater pCO₂ increased, but markedly decreased in seawater under nearly unsaturated and unsaturated conditions (≤1.04) of the aragonite saturation state (Ω _aragonite). The results indicate that increased pCO₂ seawater has a progressive and acute effect on embryonic and larval T. cornutus, and imply that the extended early developmental period and/or the downsized larval shell produced by ocean acidification will have a negative impact on survival, settlement and recruitment well into the future.     

Plutonium(VI) accumulation and reduction by lichen biomass: correlation with U(VI)

The uptake of plutonium(VI) and uranium(VI) by lichen biomass was studied in the foliose lichen Parmotrema tinctorum to elucidate the migration behavior of Pu and U in the terrestrial environment. Pu and U uptake by P. tinctorum averaged 0.040+/-0.010 and 0.055+/-0.015 g gdry (-1), respectively, after 96 h incubation with 4.0 x 10(14) mol 1(-1) Pu solutions of pH 3, 4 and 5. SEM observations showed that the accumulated Pu is evenly distributed on the upper and lower surfaces of P. tinctorum, in contrast to U(VI), which accumulated in both cortical and medullary layers. UV/VIS absorption spectroscopy demonstrates that a fraction of Pu(VI) in the solution is reduced to Pu(V) by the organic substances released from P. tinctorum, and the accumulated Pu on the surface is reduced to Pu(IV), while U(VI) keeps the oxidation state of VI. Since the solubility of Pu(IV) hydroxides is very low, reduced Pu(VI) does not penetrate to the medullary layers, but is probably precipitated as Pu(IV) hydroxides on the cortical lichen surface. It is concluded that the uptake and reduction of Pu(VI) by lichens is important to determine the mobilization and oxidation states of Pu in the terrestrial environment.     

Detoxification of hexachlorobenzene by dechlorination with potassium-sodium alloy

Dechlorination of hexachlorobenzene (HCB) was achieved by a liquid potassium–sodium (K–Na)-alloy. HCB in a cyclohexane/benzene solution (22 mmol/l, 4.67 g/l as chlorine) was dechlorinated by almost 100% after a 30-min reaction, indicating high reactivity of K–Na alloy and high proton donating power of cyclohexane. Decreasing orders of chlorobenzenes identified after a 15-min reaction, by amount were 1,2,3,4- > 1,2,3,5- > 1,2,4,5- for tetrachlorobenzenes, 1,2,4- > 1,2,3- > 1,3,5- for trichlorobenzenes, and 1,4- > 1,3- > 1,2- for dichlorobenzenes. It was hypothesized that once one chlorine atom in HCB was replaced with a proton, the adjacent chlorine atom to the proton tended to be replaced with another hydrogen atom. A total of 63 PCBs formed via the Wurtz–Fittig reaction were identified as by-products in the sample after a 15-min reaction. Among PCBs found, 2,3^′,4^′,5-tetrachlorobiphenyl, which was a product from 1,2,4-trichlorobenzene formed via the Wurtz–Fittig reaction, was detected in relatively high concentration (48.9 nmol/ml). The sample obtained from a reaction mixture after 30 min contained only 14 PCBs in trace amounts, indicating that the PCBs formed were also further dechlorinated by K–Na alloy. Non-chlorinated compounds––such as methylbenzene, dimethylbenzene, dimer of tetrahydrofuran, and dicyclohexyl (dimer of cyclohexane)––were also identified in the samples. A method using K–Na alloy developed in the present study dechlorinated satisfactorily HCB at room temperature.     

Safety studies on hydraulic proportional valves with electrical position feedback.

The authors analysed a proportional valve with electrical position feedback for its failure behaviour. Several failures were introduced into the feedback loop, especially into the 2 solenoids and the inductive position transducer. The behaviour of the valve for square and ramp reference signals was recorded and systematically analysed. It was shown that failures could be detected by monitoring the residual signal from the equipment under control or the residual signal from the sensor. It was possible to achieve the safe position within twice the normal response time of the valve by switching off the current of both solenoids. The application of these results for a new generation of safe proportional valves is discussed. The use of the results of these investigations obviates the need for redundancy of the electrical position monitoring arrangement in a safe proportional valve.     

Modeling alkene chemistry using condensed mechanisms for conditions relevant to southeast Texas,USA

Alkenes are important in photochemical smog formation in southeast Texas due to their high emissions, especially from industrial sources in and around Houston, and their high reactivities. Therefore, properly characterizing the chemistry of alkenes in condensed mechanisms used in regional photochemical models is important in understanding the formation of ozone and other photochemical air pollutants in Houston. The performance of three versions of the SAPRC condensed chemical mechanism family, for predicting ozone and radical formation, was compared. Simulations were compared to environmental chamber data and ambient data. The analyses showed that separately modeling individual alkenes reactions (especially propene for southeast Texas) has the potential to lead to more accurate simulations of alkene chemistry. Caution must be exercised in un-lumping, however. Testing with different formulations of the 1-butene + O₃ reaction demonstrated the complexity and interconnectedness in choices of stoichiometric parameters for un-lumped species and the extent to which lumped mechanisms are un-lumped.     

Effects of Land Use Data on Dry Deposition in a Regional Photochemical Model for Eastern Texas

ABSTRACT

Land use data are among the inputs used to determine dry deposition velocities for photochemical grid models such as the Comprehensive Air Quality Model with extensions (CAMx) that is currently used for attainment demonstrations and air quality planning by the state of Texas. The sensitivity of dry deposition and O₃ mixing ratios to land use classification was investigated by comparing predictions based on default U.S. Geological Survey (USGS) land use data to predictions based on recently compiled land use data that were collected to improve biogenic emissions estimates. Dry deposition of O₃ decreased throughout much of eastern Texas, especially in urban areas, with the new land use data. Predicted 1-hr averaged O₃ mixing ratios with the new land use data were as much as 11 ppbv greater and 6 ppbv less than predictions based on USGS land use data during the late afternoon. In addition, the area with peak O₃ mixing ratios in excess of 100 ppbv increased significantly in urban areas when deposition velocities were calculated based on the new land use data. Finally, more detailed data on land use within urban areas resulted in peak changes in O₃ mixing ratios of ~2 ppbv. These results indicate the importance of establishing accurate, internally consistent land use data for photochemical modeling in urban areas in Texas. They also indicate the need for field validation of deposition rates in areas experiencing changing land use patterns, such as during urban reforestation programs or residential and commercial development.     

Safety Studies on Hydraulic Proportional Valves With Electrical Position Feedback

The authors analysed a proportional valve with electrical position feedback for its failure behaviour. Severalfailures were introduced into the feedback loop, especially into the 2 solenoids and the inductive positiontransducer. The behaviour of the valve for square and ramp reference signals was recorded and systematicallyanalysed. It was shown that failures could be detected by monitoring the residual signal from the equipmentunder control or the residual signal from the sensor. It was possible to achieve the safe position within twice thenormal response time of the valve by switching off the current of both solenoids. The application of these resultsfor a new generation of safe proportional valves is discussed. The use of the results of these investigationsobviates the need for redundancy of the electrical position monitoring arrangement in a safe proportionalvalve.     

Rare earth element content in various waste ashes and the potential risk to Japanese soils.

Selected chemical characteristics of rare earth elements (REEs) in 89 waste ash samples, including food scrap ashes (FSA), animal waste ashes (AWA), horticulture waste ashes (HWA), sewage sludge ashes (SSA) and incinerator bottom ashes (IBA), were examined in this study. The results showed that Y, La, Ce, Pr, Nd, Dy, Yb, Ho, Er, Tm, Lu in the waste ash samples were normally distributed, but Sc, Sm, Eu, Gd, Tb were not. Average REE concentrations followed the sequence of Ce > La = Y> Sc>Nd>Sm>Pr>Gd>Dy>Eu>Tb>Er> Yb>Ho>Lu>Tm. Of the five types of waste ashes, total REE contents (sigmaREE) ranged from 54 to 130 mg/kg, following the sequence of SSA>HWA>IBA>AWA>FSA; individual REE concentrations were within 0.04-20, 0.1-29, 0.2-33, 0.1-44 and 0.01-41 mg/kg for FSA, AWA, HWA, SSA and IBA, respectively. Crust-normalized REE patterns indicated that SSA was enriched with Sc, Sm, Eu, Gd, Tb and slightly enriched with La, Ce; IBA was enriched with Eu, Tb and slightly with La, Y, Ce; FSA was slightly enriched with Sm, Eu, Tb; REEs were not found to be elevated in HWA and AWA. Comparison of REE content in the waste ashes and in six principal Japanese agricultural soils indicated that application of FSA, AWA and HWA to agricultural land will cause no REE problem, but continuous application of SSA or IBA may cause Sc, Sm or Eu accumulation in some of the soils.     

Removal of heavy metals in rinsing wastewater from plating factory by adsorption with economical viable materials

The removal of heavy metals from plating factory wastewater with economical materials was investigated by the column method. Montmorillonite, kaolin, tobermorite, magnetite, silica gel and alumina were used as the economical adsorbents to wastewater containing Cd(II), Cr(VI), Cu(II) and Pb(II). This removal method of heavy metals proved highly effective as removal efficiency tended to increase with increasing pH and decrease with increasing metal concentration. The removal percentages by adsorption onto montmorillonite, tobermorite, magnetite, and silica gel showed high values for all metals. From the results for the heat of adsorption, the adsorption process in the present study might be chemisorption. The proposed method was successfully applied to the removal of Cd(II), Cr(VI) and Cu(II) in rinsing wastewater from plating factory in Nagoya City, Aichi Prefecture, Japan. Since the economical adsorbents used can be obtained commercially because they are easily synthesized, the wastewater treatment system developed is rapid, simple and cheap for the removal of heavy metals.     

Motorcycle recycling flow and end-of-life motorcycles in Japan

Journal of Material Cycles and Waste Management - This study compiled the number of End-of-Life motorcycles (ELMCs), utilizing Japanese official motorcycle data to clarify “the...