Fossil insect evidence for the end of the Western Settlement in Norse Greenland

The fate of Norse farming settlements in southwest Greenland has often been seen as one of the great mysteries of North Atlantic colonization and expansion. Preservation of organic remains in the permafrost of the area of the Western Settlement, inland from the modern capital Nuuk, allowed very detailed study of the phases of occupation. Samples were taken from house floors and middens during the process of archaeological excavations and from insect remains were abstracted and identified in the laboratory. In this study, we present a new paleoecological approach principally examining the fossil fly faunas from house floors. The results of our study provide contrasting detailed pictures of the demise of two neighboring farms, Gården under Sandet and Nipaatsoq, one where abandonment appears as part of a normal process of site selection and desertion, and the other where the end was more traumatic. The level of detail, which was obtained by analysis of the dipterous (true fly) remains, exceeds all previous work and provides insights otherwise unobtainable.     

Study of vehicle speeds on a major highway in Ghana: implication for monitoring and control

OBJECTIVE: Vehicular speeds have been identified to be at the core of road accident severity and frequency globally. Whereas speed control is a fundamental priority and the cornerstone of road safety in the developed world, the subject is at rudimentary stages in most developing countries thus making research into vehicle speeds in developing nations imperative. The main aim of the study was to establish two major speed parameters, namely the mean speed and dispersion, and their implications for more extensive and long-term speed monitoring in Ghana. METHODS: Research workers stationed themselves in a parked car and used a radar gun to unobtrusively measure the travelling speeds of 4,163 vehicles over two 24-hour periods at two separate sites on one of the main inter-urban roads (Accra-Kumasi). Both sites were settled areas with posted speed limits of 50 km/hr. RESULTS: Over 95% of vehicles travelled above the posted speed limit of 50 km/hr. Vehicles on an average travelled at 87 km/hr, (95% CI=87, 88). Variation in speeds was wide, with a standard deviation of 18 km/hr for all classes of vehicles, and with a range of 40 to 187 km/hr. The highest vehicular speed was associated with the private car (97.6+/-18.3 km/hr) followed by large buses (93.6+/-13.3 km/hr) and the least was with heavy trucks (73.8+/-12.9 km/hr). CONCLUSION: The excessive vehicular speeds coupled with the wide speed variations explain in part the high incidence of traffic crashes and fatalities on the Accra-Kumasi highway. An integrated speed monitoring and control program, and realigning the highway to by-pass small and medium settlements would be required as a long-term measure for the reduction of speed-related road traffic crashes, fatalities, and injuries in Ghana.     

The water supply footprint (WSF): a strategic planning tool for sustainable regional and local water supplies

This paper introduces a new methodological approach of the ecological footprint explicitly addressing the sustainability of water supplies, which we call the water supply footprint (WSF). The WSF calculates the catchment area or water supply hinterland of a certain society and can serve as a strategic planning tool for local or regional water supplies linking the water demand with the water supply in a water supply footprint matrix. Based on regional water balances it estimates how much water can be appropriated for human use in an environmentally sustainable way.The proposed method is tested on the South East Queensland water supply in Australia, an area where water use restrictions are regularly imposed on the population. Applying the proposed method indicates that supply shortages may be avoided by considerably changing the organisation of water supply, thereby reducing and possibly even avoiding the necessity for large-scale supply side measures like additional sweet water reservoirs or desalination plants. In that way it is demonstrated that the WSF method is applicable at an early and strategic stage of water supply planning.     

An estimated 400–800 million tons of prey are annually killed by the global spider community

Spiders have been suspected to be one of the most important groups of natural enemies of insects worldwide. To document the impact of the global spider community as insect predators, we present estimates of the biomass of annually killed insect prey. Our estimates assessed with two different methods suggest that the annual prey kill of the global spider community is in the range of 400–800 million metric tons (fresh weight), with insects and collembolans composing >90% of the captured prey. This equals approximately 1‰ of the global terrestrial net primary production. Spiders associated with forests and grasslands account for >95% of the annual prey kill of the global spider community, whereas spiders in other habitats are rather insignificant contributors over a full year. The spider communities associated with annual crops contribute less than 2% to the global annual prey kill. This, however, can be partly explained by the fact that annual crop fields are “disturbed habitats” with a low buildup of spider biomass and that agrobiont spiders often only kill prey over short time periods in a year. Our estimates are supported by the published results of exclusion experiments, showing that the number of herbivorous/detritivorous insects and collembolans increased significantly after spider removal from experimental plots. The presented estimates of the global annual prey kill and the relative contribution of spider predation in different biomes improve the general understanding of spider ecology and provide a first assessment of the global impact of this very important predator group.     

Testing the influence of gravity on flower symmetry in five <Emphasis Type="Italic">Saxifraga</Emphasis> species

Flower symmetry is considered a species-specific trait and is categorized in asymmetry, actinomorphic symmetry, bisymmetry and zygomorphic symmetry. Here we report on the intra-individual variation of flower symmetry in the genus Saxifraga and the influence of light, gravity and intrinsic factors on the development of flower symmetry. We tested five species—Saxifraga cuneifolia, Saxifraga imparilis, Saxifraga rotundifolia, Saxifraga stolonifera and Saxifraga umbrosa—concerning six flower parameters—angles between petals, petal length, petal pigmentation, angular position of carpels, movement of stamens and (only for S. imparilis and S. stolonifera) the length of the two lower elongated petals in regard to their position towards the stem. Specimens of all species were tested on a vertical clinostat as a gravity compensator, on a horizontal clinostat as a light incidence compensator and on a stationary control. The results show that the angle of incident light has no apparent impact on flower symmetry, whereas gravity affects the angular position of petals in S. cuneifolia and S. umbrosa and the petal colouration in S. rotundifolia. In S. cuneifolia and S. umbrosa, the absence of directional gravity resulted in the development of actinomorphic flowers, whereas the corresponding control flowers were zygomorphic. The development of flowers in S. rotundifolia was not altered by this treatment. The length of the two elongated petals in S. stolonifera and S. imparilis was not affected by gravity, but rather was determined by position of the flower within the inflorescence and resulted in asymmetrical flowers.     

Support for maternal manipulation of developmental nutrition in a facultatively eusocial bee, <Emphasis Type="Italic">Megalopta genalis</Emphasis> (Halictidae)

Developmental maternal effects are a potentially important source of phenotypic variation, but they can be difficult to distinguish from other environmental factors. This is an important distinction within the context of social evolution, because if variation in offspring helping behavior is due to maternal manipulation, social selection may act on maternal phenotypes, as well as those of offspring. Factors correlated with social castes have been linked to variation in developmental nutrition, which might provide opportunity for females to manipulate the social behavior of their offspring. Megalopta genalis is a mass-provisioning facultatively eusocial sweat bee for which production of males and females in social and solitary nests is concurrent and asynchronous. Female offspring may become either gynes (reproductive dispersers) or workers (non-reproductive helpers). We predicted that if maternal manipulation plays a role in M. genalis caste determination, investment in daughters should vary more than for sons. The mass and protein content of pollen stores provided to female offspring varied significantly more than those of males, but volume and sugar content did not. Sugar content varied more among female eggs in social nests than in solitary nests. Provisions were larger, with higher nutrient content, for female eggs and in social nests. Adult females and males show different patterns of allometry, and their investment ratio ranged from 1.23 to 1.69. Adult body weight varied more for females than males, possibly reflecting increased variation in maternal investment in female offspring. These differences are consistent with a role for maternal manipulation in the social plasticity observed in M. genalis.     

Sources of polycyclic aromatic hydrocarbons (PAHs) in sediments of the Biobio River in south central Chile

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the environment; there are concerns about them due to their toxic properties. Human activities could significantly contribute to the total PAH burden in river sediments. In this work, we document the analysis of PAHs in sediments taken in the middle stretch of the Biobio River in south central Chile. This river is a principal system, draining more than 24,000 km² and subjected to a diverse variety of human-made stressors (pulp mill and urban effluents, agricultural drainage systems, etc). During 2003, several sediment samples were taken in more than 45 sampling sites located in the river’s middle stretch. Due to the granulometric characteristics (mainly sandy sediments), only 17 samples were analyzed, taking into consideration the presence of a fine section within the sediment sample. Using HPLC with fluorescence detection, 15 EPA priority PAHs and perylene were analyzed. The composition of PAHs in the sediment samples is rather similar between sites and levels averaged 104 ± 78 ng g⁻¹ d.w. The highest levels were detected downstream from an industrial discharge. A good correlation was observed between PAH levels and organic carbon content in the tested sediments; however, concentrations above 134 ng g⁻¹ d.w. did not indicate correlation. The samples PAH ratios (Flu/Pyr and Chr/B(a)A) reveal a strong pyrolytic PAH pattern in the sediments tested, supporting evidence indicating that PAHs come mainly from pyrolytic sources. This result contrasts with previous records that have shown a natural influence in the upper basin and a petrogenic pattern near the mouth.     

Nutritionally relevant elements in staple foods: influence of arable site versus choice of variety

Eighteen representative sites for the Austrian grain-growing and eight for the potato-growing zones (soils and crops) were investigated. On each site, total element contents (B, Ba, Ca, Cd, Co, Cu, Fe, K, Li, Mg, Mn, Mo, Na, P, Sr and Zn) were determined in 4–12 varieties of winter wheat (n = 136), 6 varieties of spring durum wheat (n = 30), 5 varieties of winter durum wheat (n = 15), 7 varieties of rye (n = 49), 5 varieties of spring barley (n = 30) and 5 varieties of potatoes (n = 40). Element accumulations in grain species and potato tubers varied significantly with site conditions, with the main exceptions for B in potatoes and wheat as well as for Zn, Cu and Co in durum wheat. On average, across all investigated sites, differences in varieties occurred concerning the elements Ca, Cd, Ba, Sr and Zn (except Zn in potatoes and winter durum). A rough estimation revealed that an average Austrian consumer of wheat, rye and potatoes meets more than 50% of the needs of daily element intake for K, P and Mg, between 36 and 72% for Fe, Zn and Cu, and more than 100% for Co, Mo and Mn. In particular, the elements Ca and Na have to be added from other sources.     

Clearance rates of the great scallop (<Emphasis Type="Italic">Pecten maximus</Emphasis>) and blue mussel (<Emphasis Type="Italic">Mytilus edulis</Emphasis>) at low natural seston concentrations

Great scallop, Pecten maximus, and blue mussel, Mytilus edulis, clearance rate (CR) responses to low natural seston concentrations were investigated in the laboratory to study (1) short-term CR variations in individual bivalves exposed to a single low seston diet, and (2) seasonal variations in average CR responses of bivalve cohorts to natural environmental variations. On a short temporal scale, mean CR response of both species to 0.06 μg L⁻¹ chlorophyll a (Chl a) and 0.23 mg L⁻¹ suspended particulate matter (SPM) remained constant despite large intra-individual fluctuations in CR. In the seasonal study, cohorts of each species were exposed to four seston treatments consisting of ambient and diluted natural seston that ranged in mean concentration from 0.15 to 0.43 mg L⁻¹ SPM, 0.01 to 0.88 μg L⁻¹ Chl a, 36 to 131 μg L⁻¹ particulate organic carbon and 0.019 to 0.330 mm³ L⁻¹ particle volume. Although food abundance in all treatments was low, the nutritional quality of the seston was relatively high (e.g., mean particulate organic content ranged from 68 to 75%). Under these low seston conditions, a high percentage of P. maximus (81–98%) and M. edulis (67–97%) actively cleared particles at mean rates between 9 and 12 and between 4 and 6 L g⁻¹ h⁻¹, respectively. For both species, minimum mean CR values were obtained for animals exposed to the lowest seston concentrations. Within treatments, P. maximus showed a greater degree of seasonality in CR than M. edulis, which fed at a relatively constant rate despite seasonal changes in food and temperature. P. maximus showed a non-linear CR response to increasing Chl a levels, with rates increasing to a maximum at approximately 0.4 μg L⁻¹ Chl a and then decreasing as food quantity continued to increase. Mean CR of M. edulis also peaked at a similar concentration, but remained high and stable as the food supply continued to increase and as temperatures varied between 4.6 and 19.6°C. The results show that P. maximus and M. edulis from a low seston environment, do not stop suspension-feeding at very low seston quantities; a result that contradicts previous conclusions on the suspension-feeding behavior of bivalve mollusks and which is pertinent to interpreting the biogeographic distribution of bivalve mollusks and site suitability for aquaculture.     

Vertical migration of radionuclides in undisturbed grassland soils

Literature data on numerical values obtained for the parameters of the two most popular models for simulating the migration of radionuclides in undisturbed soils have been compiled and evaluated statistically. Due to restrictions on the applicability of compartmental models, the convection–dispersion equation and its parameter values should be preferred. For radiocaesium, recommended values are derived for its effective convection velocity and dispersion coefficient. Data deficiencies still exist for radionuclides other than caesium and for soils of non-temperate environments.