The qiongshan earthquake of july 1605

In 1605 a destructive earthquake affected the northern region of Hainan Island and adjacent parts of the Chinese mainland. Based on a detailed analysis of contemporary chronicles, the authors present a revision of the effects of the earthquake, and show that a sequence of strong shocks throughout 1605 caused cumulative damage and relatively heavy loss of life in Qiongshan. The subsidence of large areas of coast round Puqian Bay and Dongzhai Port is shown to be due to a combination of liquefaction caused by the shock, the occurrence of a typhoon associated with flooding and exacerbated by a high surge tide, as well as a long-term process of active tectonic movement in the area; the subsidence was not caused by downthrow of the earth's crust during the shock. Topographical changes in the area, traced from historical maps, suggest that subsidence is continuing, but a survey of the long-term seismicity of Hainan Island indicates that it is not an area of exceptional seismic risk.     

Quantitative analysis of riparian herbaceous community in Liaohe River Conservation Area and its tributaries北大核心CSCD

Research on community characteristics of riparian herbs is an important scientific basis of riparian vegetation rehabilitation. This study aimed to investigate the species diversity and quantitative characteristics of riparian herbs in Liaohe River Conservation Area and its tributaries. Herbaceous communities were investigated by sample line method. Group average clustering analysis and detrended correspondence analysis (DCA) were used to find the major environmental factors affecting the distribution pattern of riparian herbaceous communities. The result showed altogether 154 herbaceous species, belonging to 40 families and 96 genera. The riparian herbaceous species diversity was found to be correlated to river slope, sinuosity and stream order, being lower in rivers of mountain area than in rivers of plain area, and higher in tributaries than in Liaohe River Conservation Area. Clustering analysis classified the herbaceous communities into 23 types, being dominated by hygrophytes including communities of Echinochloa crusgalli, Oenanthe javanica, Polygonum hydropiper, Murdannia keisak, Artemisia selengensis, Scirpus triqueter, Heleocharis soloniensis, Pycreus sanguinolentus, Cyperus fuscus, Phragmites australis, Polygonum amphibium, Carex diandra + Artemisia selengensis and Carex diandra + Rorippa islandica. Correlation analysis between DCA ordination axes and environmental factors showed that the altitude, river slope, sinuosity and stream level were the major environmental factors affecting the distribution pattern of herbaceous communities in the riparian zone of Liaohe River Conservation Area and its tributaries. The results of CCA showed that the contribution ratio of stream level was the highest, followed by altitude and slope, with sinuosity the last. The results suggested that riparian herbaceous characteristics are affected by the comprehensive force of altitude, river slope, sinuosity and stream order, and that Calamagrostis epigeios, Triarrhena sacchariflora and Phragmites australis are suitable species for riparian vegetation rehabilitation.     

Uptake of arsenate, trimethylarsine oxide, and arsenobetaine by the shrimp Crangon crangon

Common shrimp, Crangon crangon (L.), were exposed to inorganic arsenic (arsenate), trimethylarsine oxide, or arsenobetaine in sea water (100 μg As l⁻¹) or in food (1 mg As g⁻¹ wet wt) for up to 24 d, followed by 16 d depuration in clean sea water with undosed food, in order to determine the efficiency of uptake and retention of the compounds. Accumulation of arsenic in the tail muscle, gills, midgut gland, exoskeleton, and remaining tissues was found to depend on the chemical form of the arsenic and the route of exposure. No arsenic was accumulated by C. crangon exposed to arsenate or trimethylarsine oxide in sea water. Shrimps exposed to waterborne arsenobetaine initially accumulated a small amount of arsenic in their tail muscle and gills. After 16 d, C. crangon fed arsenate, trimethylarsine oxide, or arsenobetaine had accumulated arsenic in their tail muscle to levels ∼2-, 2-, or 40-times, respectively, that of the control group. A roughly linear rate of accumulation was shown by shrimps fed trimethylarsine oxide or arsenobetaine, but C. crangon fed arsenate accumulated arsenic for 16 d, then lost arsenic such that their concentration on Day 24 was not significantly different from that of the control group. Patterns of arsenic accumulation in the gills of shrimps fed the compounds were similar to those seen in the tail muscle. On a whole animal basis, C. crangon retained ∼1.2% of the arsenate, 1.6% of the trimethylarsine oxide, and 42% of the arsenobetaine consumed over the first 16 d of exposure, with roughly half present in the tail muscle in each case. Data obtained support the view that the direct uptake of arsenobetaine from sea water does not make a significant contribution to the relatively high concentrations of this compound in marine crustaceans, and that food is the primary source. Naturally occurring arsenic compounds in C. crangon and possible transformations of the administered arsenic compounds were examined by high performance liquid chromatography using an inductively coupled plasma mass spectrometer as the arsenic-specific detector. Control C. crangon contained arsenobetaine as the major arsenic compound (>95% of total arsenic); tetramethylarsonium ion (0.7%) and an unknown arsenic compound (1.7%) were also present as minor constituents. Shrimp ingesting arsenobetaine accumulated it unchanged. Shrimp ingesting arsenate did not form methylated arsenic compounds; they appeared to contain their accumulated arsenic as unchanged arsenate only, although the possibility that some of the arsenic was reduced to arsenite could not be excluded. C. crangon ingesting trimethylarsine oxide biotransformed the compound predominantly to dimethylarsinate. Received: 9 October 1997 / Accepted: 11 February 1998     

Leaching behaviour of different scrap materials at recovery and recycling companies: Full-, pilot- and lab-scale investigation

Scrap material recovery and recycling companies are confronted with waste water that has a highly fluctuating flow rate and composition. Common pollutants, such as COD, nutrients and suspended solids, potentially toxic metals, polyaromatic hydrocarbons and poly chlorinated biphenyls can exceed the discharge limits. An analysis of the leaching behaviour of different scrap materials and scrap yard sweepings was performed at full-scale, pilot-scale and lab-scale in order to find possible preventive solutions for this waste water problem. The results of these leaching tests (with concentrations that frequently exceeded the Flemish discharge limits) showed the importance of regular sweeping campaigns at the company, leak proof or covered storage of specific scrap materials and oil/water separation on particular leachates. The particulate versus dissolved fraction was also studied for the pollutants. For example, up to 98% of the polyaromatic hydrocarbons, poly chlorinated biphenyls and some metals were in the particulate form. This confirms the (potential) applicability of sedimentation and filtration techniques for the treatment of the majority of the leachates, and as such the rainwater run-off as a whole.     

Anticipating Climate Threshold Damages

Several integrated assessment studies have concluded that future learning about the uncertainties involved in climate change has a considerable effect on welfare but only a small effect on optimal short-term emissions. In other words, learning is important but anticipation of learning is not. We confirm this result in the integrated assessment model “model of investment and technological development” for learning about climate sensitivity and climate damages. If learning about an irreversible threshold is included, though, we show that anticipation can become crucial both in terms of necessary adjustments of pre-learning emissions and resulting welfare gains. We specify conditions on the time of learning and the threshold characteristic, for which this is the case. They can be summarized as a narrow “anticipation window.”     

Removal of BTEX vapor from waste gases by a trickle bed biofilter

The system performance of a trickle bed biofilter for treating single and mixed benzene, toluene, ethylbenzene, and o-xylene (BTEX) vapors from waste gases was investigated under different gas flow rates and influent BTEX concentrations. When a single substrate was fed, removal efficiencies of greater than 90% could be achieved for the loads below 64 g benzene/m3/hr, 110 g toluene/m3/hr, 53 g ethylbenzene/m3/hr, and 55 g o-xylene/m3/hr. When a mixed substrate was fed, removal efficiencies of each compound could be above 90% at BTEX loads below 96 g/m3/hr. The trickle bed biofilter appears to be an effective treatment process for removing both single and mixed BTEX vapors with low to high loads. Under similar substrate loads, BTEX vapors were preferentially biodegraded in the order of toluene, benzene, o-xylene, and ethylbenzene. The volumetric removal rates (elimination capacities) of BTEX vapors for a single-substrate feed were higher than those for a mixed-substrate feed under similar substrate loads; these differences were enhanced at higher substrate loads and less significant for a preferred substrate.     

Costs, emissions reductions, and vehicle repair: evidence from Arizona

The Arizona inspection and maintenance (I/M) program provides one of the first opportunities to examine the costs and effectiveness of vehicle emission repair. This paper examines various aspects of emission reductions, fuel economy improvements, and repair costs, drawing data from over 80,000 vehicles that failed the I/M test in Arizona between 1995 and the first half of 1996. We summarize the wealth of data on repair from the Arizona program and highlight its limitations. Because missing or incomplete cost information has been a serious shortcoming for the evaluation of I/M programs, we develop a method for estimating repair costs when they are not reported. We find surprising evidence that almost one quarter of all vehicles that take the I/M test are never observed to pass the test. Using a statistical analysis, we provide some information about the differences between the vehicles that pass and those that do not. Older, more polluting vehicles are much more likely never to pass the I/M test, and their expected repair costs are much higher than those for newer cars. This paper summarizes the evidence on costs and emission reductions in the Arizona program, comparing costs and emissions reductions between cars and trucks. Finally, we examine the potential for more cost-effective repair, first through an analysis of tightening I/M cut points and then by calculating the cost savings of achieving different emission reduction goals when the most cost-effective repairs are made first.     

The use of amino compounds for binding 2,4,6-trinitrotoluene in water

Sites polluted with 2,4,6-trinitrotoluene (TNT) constitute a worldwide problem. In this work, chemical reactions for binding TNT to amino-compounds are proposed as an initial step for developing new remediation techniques to clean-up groundwater and soils contaminated with TNT. Indeed, addition of aniline and an amino acid-like cysteine caused a decrease in free TNT of 86% and 68-100%, respectively. Using 13C-NMR spectroscopy, it was shown that TNT chemically forms a Meisenheimer complex with cysteine and aniline in 1/1 (by vol.) H2O/d6-acetone.     

Characterization of biomass pyrolysis vapors with molecular beam, single photon ionization time-of-flight mass spectrometry

A single photon ionization, molecular beam sampling, reflectron time-of-flight mass spectrometer (SPI/MBTOFMS) has been developed and used to study pyrolysis products from a selection of biomass materials. Spectra are characterized by high resolution and decreased fragmentation compared to electron-impact ionization mass spectra from related molecular beam mass spectrometer systems equipped with quadrupole mass analyzers.