Monitoring von PAK-Metaboliten in Aalmuttern (Zoarces viviparus) aus der Wismar-Bucht

Background, aim, and scope Polycyclic aromatic hydrocarbons (PAH) are important environmental contaminants in the marine environment. The Baltic is known to be significantly contaminated with PAH. The eelpout (Zoarces viviparus) has been used for coastal monitoring in the Baltic. The aim of the present study was to elucidate whether the eelpout can be used to investigate PAH contamination in the Mecklenburg Bight and whether PAH sources may be revealed by the relation of the metabolites. Material and methods PAH metabolites were determined in the bile fluid of eelpout caught in spring 2008 at three sampling locations in the Wismar Bight. Two metabolites were determined by means of HPLC and fluorescence detection. In addition, bile pigments were measured photometrically. Results The concentrations of 1-hydroxypyrene in bile were significantly different at all three sampling locations under investigation. Highest concentrations were found near the city of Wismar with a mean value of 1086?ng/ml. Concentrations for individual fish ranged from <22.5 to 3317?ng/ml 1-hydroxypyrene. Concentrations of 1-hydroxyphenanthrene were lower and ranged from 2.1 to 803?ng/ml in individual samples. In fish caught next to the city of Wismar a mean value of 96?ng/ml 1-hydroxyphenanthrene was calculated. Discussion In the light of substantial anthropogenic contamination in this area caused by harbor, shipyards and shipping traffic, high values of 1-hydroxypyrene found in eelpout near the city of Wismar appear to be very plausible. Furtheron, the 1-hydroxypyrene results are in accordance to literature data. 1-Hydroxyphenantrene in eelpout bile was found in higher concentrations compared to earlier investigations. Spatial differences in the relation of the two metabolites may indicate a local source of PAH. Recommendations and perspectives PAH metabolites are useful parameters for monitoring the PAH pollution of fish like eelpout. Additional information regarding potential PAH sources can be gained from the relations of individual metabolites.     

NOx- und NO2-Konzentrationen

It has been confirmed that the NO_x-concentration in air is highest over industrial areas and that it decreases by more than 75%, parallel to traffic density, over urban areas as related to forested areas. A significant correlation excists between NO₂-concentration and the parameters of “traffic density,” followed by “road density” and “number of inhabitants/km²” in urban areas. No positive correlation was found with the number of “registered cars” and the parameters of “land use”. In forested areas, the traffic density correlated with the NO₂-concentration, but the correlation was not significant. The other parameters had no positive correlation with NO₂-concentration. In forest, urban- and industrial-areas, the NO_x-concentration in the air had a fairly constant ratio to traffic density.     

Emission of the greenhouse gases nitrous oxide and methane from constructed wetlands in europe

The potential atmospheric impact of constructed wetlands (CWs) should be examined as there is a worldwide increase in the development of these systems. Fluxes of N(2)O, CH(4), and CO(2) have been measured from CWs in Estonia, Finland, Norway, and Poland during winter and summer in horizontal and vertical subsurface flow (HSSF and VSSF), free surface water (FSW), and overland and groundwater flow (OGF) wetlands. The fluxes of N(2)O-N, CH(4)-C, and CO(2)-C ranged from -2.1 to 1000, -32 to 38 000, and -840 to 93 000 mg m(-2) d(-1), respectively. Emissions of N(2)O and CH(4) were significantly higher during summer than during winter. The VSSF wetlands had the highest fluxes of N(2)O during both summer and winter. Methane emissions were highest from the FSW wetlands during wintertime. In the HSSF wetlands, the emissions of N(2)O and CH(4) were in general highest in the inlet section. The vegetated ponds in the FSW wetlands released more N(2)O than the nonvegetated ponds. The global warming potential (GWP), summarizing the mean N(2)O and CH(4) emissions, ranged from 5700 to 26000 and 830 to 5100 mg CO(2) equivalents m(-2) d(-1) for the four CW types in summer and winter, respectively. The wintertime GWP was 8.5 to 89.5% of the corresponding summertime GWP, which highlights the importance of the cold season in the annual greenhouse gas release from north temperate and boreal CWs. However, due to their generally small area North European CWs were suggested to represent only a minor source for atmospheric N(2)O and CH(4).     

Bio fuel ash in a road construction: impact on soil solution chemistry

Limited natural resources and landfill space, as well as increasing amounts of ash produced from incineration of bio fuel and municipal solid waste, have created a demand for useful applications of ash, of which road construction is one application. Along national road 90, situated about 20 km west of Sollefteå in the middle of Sweden, an experiment road was constructed with a 40 cm bio fuel ash layer. The environmental impact of the ash layer was evaluated from soil solutions obtained by centrifugation of soil samples taken on four occasions during 2001–2003. Soil samples were taken in the ash layer, below the ash layer at two depths in the road and in the ditch. In the soil solutions, pH, conductivity, dissolved organic carbon (DOC) and the total concentration of cations (metals) and anions were determined. Two years after the application of the ash layers in the test road, the concentrations in the ash layer of K, SO₄, Zn, and Hg had increased significantly while the concentration of Se, Mo and Cd had decreased significantly. Below the ash layer in the road an initial increase of pH was observed and the concentrations of K, SO₄, Se, Mo and Cd increased significantly, while the concentrations of Cu and Hg decreased significantly in the road and also in the ditch. Cd was the element showing a potential risk of contamination of the groundwater. The concentrations of Ca in the ash layer indicated an ongoing hardening, which is important for the leaching rate and the strength of the road construction.     

Reuse of textile effluent treatment plant sludge in building materials

This study examines the potential reuse of textile effluent treatment plant (ETP) sludge in building materials. The physico-chemical and engineering properties of a composite textile sludge sample from the southern part of India have been studied. The tests were conducted as per Bureau of Indian Standards (BIS) specification codes to evaluate the suitability of the sludge for structural and non-structural application by partial replacement of up to 30% of cement. The cement-sludge samples failed to meet the required strength for structural applications. The strength and other properties met the Bureau of Indian Standards for non-structural materials such as flooring tiles, solid and pavement blocks, and bricks. Results generally meet most ASTM standards for non-structural materials, except that the sludge-amended bricks do not meet the Grade NW brick standard. It is concluded that the substitution of textile ETP sludge for cement, up to a maximum of 30%, may be possible in the manufacturing of non-structural building materials. Detailed leachability and economic feasibility studies need to be carried out as the next step of research.     

Gas phase precursors to anthropogenic secondary organic aerosol: Using the Master Chemical Mechanism to probe detailed observations of 1,3,5-trimethylbenzene photo-oxidation

A detailed gas-phase photochemical chamber box model, incorporating the Master Chemical Mechanism (MCMv3.1) degradation scheme for the model anthropogenic aromatic compound 1,3,5-trimethylbenzene, has been used to simulate data measured during a series of aerosol chamber experiments in order to evaluate the mechanism under a variety of VOC/NO_x conditions.The chamber model was used in the interpretation of comprehensive high (mass and time) resolution measurements of 1,3,5-trimethylbenzene and its photo-oxidation products recorded by a Chemical Ionisation Reaction Time-of-Flight Mass Spectrometer (CIR-TOF-MS). Supporting gas and aerosol measurements have also enabled us to explore the ‘missing link’ between the gas and aerosol phases. Model-measurement comparisons have been used to gain insight into the complex array of oxygenated products formed, including the peroxide bicyclic ring opening products (α,β-unsaturated-γ-dicarbonyls and furanones) and the O₂-bridged peroxide bicyclic ring-retaining products. To our knowledge this is the first time such high molecular weight species, corresponding to various peroxide bicyclic products represented in the MCMv3.1, have been observed in the gas-phase. The model was also used to give insight into which gas-phase species were participating in SOA formation, with the primary and secondary peroxide products, formed primarily under low NO_x conditions, identified as likely candidates.     

Cumulative risk assessment of chemical exposures in urban environments

We performed a cumulative risk assessment for people living in a hypothetical urban environment, called Urbania. The main aims of the study were to demonstrate how a cumulative risk assessment for a middle-sized European city can be performed and to identify the bottlenecks in terms of data availability and knowledge gaps. The assessment focused on five air pollutants (i.e., PM??, benzene, toluene, nonane and naphthalene) and six food pesticides (i.e., acetamiprid, carbendazim, chlorpyrifos, diazinon, imidacloprid and permethrin). Exposure predictions showed that PM??, benzene and naphthalene exposure frequently exceeded the standards, and that the indoor environment contributed more than the outdoor environment. Effect predictions showed that mixture and interaction effects were generally limited. However, model calculations indicated potential synergistic effects between naphthalene and benzene and between chlorpyrifos, diazinon and toluene. PM?? dominated the health impact expressed in Disability Adjusted Life Years (DALYs). We conclude that measures to reduce the health impact of environmental pollution should focus on the improvement of indoor air quality and the reduction of PM?? emissions. Cumulative risk assessment can be improved by (1) the development of person-oriented exposure models that can simulate the cumulative exposure history of individuals, (2) a better mechanistic understanding of the effects of cumulative stressors, and (3) the development of instruments to prioritize stressors for inclusion in cumulative risk assessments.     

Personal care product use and urinary levels of phthalate metabolites in Mexican women

Sources of phthalates other than Polyvinyl chloride (PVC) related products are scarcely documented in Mexico. The objective of our study was to explore the association between urinary levels of nine phthalate metabolites and the use of personal care products. Subjects included 108 women who participated as controls in an ongoing population-based case-control study of environmental factors and genetic susceptibility to breast cancer in northern Mexico. Direct interviews were performed to inquire about sociodemographic characteristics, reproductive history, use of personal care products, and diet. Phthalate metabolites measured in urine by high performance liquid chromatography-isotope dilution tandem mass spectrometry were monoethyl phthalate (MEP), monobenzyl phthalate (MBzP), mono-n-butyl phthalate (MBP), mono-isobutyl phthalate (MiBP), mono-3-carboxypropyl phthalate (MCPP) as well as mono-2-ethylhexyl phthalate (MEHP), mono-2-ethyl-5-oxohexyl phthalate (MEOHP), mono-2-ethyl-5-hydroxyhexyl phthalate (MEHHP), mono-2-ethyl-5-carboxypentyl phthalate (MECPP) that are metabolites of di-ethylhexyl phthalate (DEHP). Detectable urinary concentrations of phthalate metabolites varied from 75% (MEHP) to 100% (MEP, MBP, MEOHP, MEHHP and MECPP). Medians of urinary concentrations of some phthalate metabolites were significantly higher among users of the following personal care products compared to nonusers: body lotion (MEHHP, MECPP and sum of DEHP metabolites (ΣDEHP)), deodorant (MEHP and ΣDEHP), perfume (MiBP), anti-aging facial cream (MEP, MBP and MCPP) and bottled water (MCPP, MEHHP and MEOHP). Urinary concentrations of MEP showed a positive relationship with the number of personal care products used. Our results suggest that the use of some personal care products contributes to phthalate body burden that deserves attention due to its potential health impact.