Atmospheric fate and transport of dioxins: local impacts

We conducted model simulations of the atmospheric fate and transport of PCDD/F to assess the fraction of emitted PCDD/F that would deposit within 100 km from the source. We considered eight major categories of PCDD/F emission sources and six different locations, to cover a wide range of source characteristics, PCDD/F congener profiles and particle size distributions, meteorological conditions and terrain configurations. These results suggest that for sources that have tall stacks and/or high plume rise (e.g., copper smelters, cement kilns, sinter plants), only a small fraction of PCDD/F emissions is deposited locally (typically, less than 10% within 100 km). Other source categories such as municipal solid waste incinerators, medical waste incinerators and diesel trucks lead to a greater fraction of PCDD/F being deposited locally; nevertheless, the majority of their PCDD/F emissions tends to be transported beyond 100 km. Although local impacts may need to be addressed for these latter source categories, it appears that the long-range potential impacts of PCDD/F need to be addressed for all source categories. Sensitivity studies were conducted to investigate the effect of various key model inputs on simulation results. These studies suggest that an advanced atmospheric dispersion model should be used for cases where PCDD/F emissions may present some local concerns because the results are very sensitive to the treatment of dispersion. Also, it is essential to obtain accurate characterizations of the particle size distribution of particulate PCDD/F because the dry deposition flux is very sensitive to the particle size distribution.     

Immunotoxicity risks associated with land-treatment of petrochemical wastes revealed using an in situ rodent model

Land-treatment of petrochemical wastes is a widely used method to dispose of hazardous and non-hazardous waste by biodegradation. However, no comprehensive assessment of the impact of such disposal techniques on terrestrial ecosystems has been conducted. Despite the presence of suspected immunotoxicants in the soil, wild rodents frequently reside on these waste sites after closure or abandonment. We explored the seasonal sensitivity of the immune system of the hispid cotton rat (Sigmodon hispidus) to in situ exposures on sites land-treated with petrochemical wastes. Animals were monitored on five contaminated land-treatment sites and five ecologically matched-reference sites in Oklahoma, USA, over two seasons (summer and winter). Most hematological parameters were not adversely affected by land-treatment; however, platelet counts were 26% greater in cotton rats from land-treatment sites compared to reference sites in winter. Significant treatment-related differences were observed in total serum protein concentrations, organ mass and organ cellularity, but these differences were not consistent across the five land-treatment units. Lymphoproliferative responses of cotton rat splenocytes stimulated in vitro were elevated for a T-cell mitogen and depressed for a B-cell mitogen in animals from land-treatment compared to reference sites. The ability of splenocytes to proliferate in response to interleukin-2 receptor-binding was not influenced by treatment. Total yields of peritoneal cells, yield of peritoneal macrophages, and yield of peritoneal lymphocytes were influenced to varying degrees by land-treatment. Functionally, in vitro metabolic activity of peritoneal macrophages was 114% greater in cotton rats from land-treatment sites compared to reference sites during summer. These results indicate that petrochemical wastes applied to soils on these five land-treatment sites had variable immunomodulatory effects in resident cotton rats. Immune alterations for some assays were indicative of enhancement on some land-treatment sites while suppressive on other land-treatment sites, which could have been a function of type and concentration of immunotoxicants present on each site and highlights the uniqueness of each land-treatment site.     

Air pollution modeling for an industrial complex and model performance evaluation

Jamshedpur, the steel city of India situated in the eastern part of India is affected by increasing air pollution levels as a result of concentrated industrial activities. The impact of NOx emissions resulting from various air pollution sources, viz. industries, vehicles and domestic, was estimated using Industrial Source Complex Short-Term gaussian dispersion model. The contribution of NOx concentration from industrial, vehicular and domestic sources was found to be 53, 40 and 7%. Further statistical analysis was carried out to evaluate the model performance by comparing measured and predicted NOx concentrations. The model performance was found good with an accuracy of about 68%.     

Contribution of dissolved sulfates and sulfites in hydrogen sulfide emission from stagnant water bodies in Sri Lanka

Accumulation of sulfur-containing compounds and their bacterial mediated reductions have led to the emission of pungent odors from stagnant water bodies. This study is focused on the contribution of inorganic sulfur compounds in the emission of hydrogen sulfide. The measured dissolved oxygen levels have demonstrated good negative correlations with the dissolved sulfide levels implying the oxygen deficiency is the key for the reduction of sulfate ion and sulfite ion to sulfide ion. Particularly, the dissolved molar fractions of sulfide from the total dissolved sulfur compounds (sulfates, sulfites and sulfides) have a very good correlation with the dissolved oxygen for the stagnant water bodies except the artificially aerated prawn farms. For the stagnant water bodies with significant correlations, linear regressions are reported for them to be utilized in estimating one component of the regression from the measurement of the other. The measured data were further utilized to estimate the levels of hydrogen sulfide gas. The pH of the water bodies has confined much of the dissolved sulfides in the form of bisulfide ion and they can be easily escaped to the atmosphere upon acidification due to industrial discharges and/or acidic precipitations. The estimated levels of hydrogen sulfide just above the water surface were plotted for the most polluted stagnant water body in Sri Lanka for the pH range of 5-10 and temperature range of 25-35 degrees C.     

PM2.5 assessment in 21 European study centers of ECRHS II: Method and first winter results

The follow-up of a cohort of adults from 29 European centers of the former European Community Respiratory Health Survey (ECRHS) I (1989-1992) will examine the long-term effects of exposure to ambient air pollution on the incidence, course, and prognosis of respiratory diseases, in particular asthma and decline in lung function. The purpose of this article is to describe the methodology and the European-wide quality control program for the collection of particles with 50% cut-off size of 2.5 microm aerodynamic diameter (PM2.5) in the ECRHS II and to present the PM2.5 results from the winter period 2000-2001. Because PM2.5 is not routinely monitored in Europe, we measured PM2.5 mass concentrations in 21 participating centers to estimate background exposure in these cities. A standardized protocol was developed using identical equipment in each center (U.S. Environmental Protection Agency Well Impactor Ninety-Six [WINS] and PQ167 from BGI, Inc.). Filters were weighed in a single central laboratory. Sampling was conducted for 7 days per month for a year. Winter mean PM2.5 mass concentrations (November 2000-February 2001) varied substantially, with Iceland reporting the lowest value (5 microg/m3) and northern Italy the highest (69 microg/m3). A standardized procedure appropriate for PM2.5 exposure assessment in a multicenter study was developed. We expect ECRHS II to have sufficient variation in exposure to assess long-term effects of air pollution in this cohort. Any bias caused by variation in the characteristics of the chosen monitoring location (e.g., proximity to traffic sources) will be addressed in later analyses. Given the homogenous spatial distribution of PM2.5, however, concentrations measured near traffic are not expected to differ substantially from those measured at urban background sites.     

Particulate and dissolved elemental loads in the Kuji River related to discharge rate

In order to investigate influences of discharge rates on fluvial transport behavior of elements in the Kuji River, Japan, suspended and dissolved phase concentrations in the river water were measured together with the water flow rates. The concentrations of suspended particulate matter (SPM) increased by two or three orders of magnitude with the water discharge, and also had seasonal variations. Adsorptive elements or heavy metal elements, which tend to form insoluble compounds, were present generally as suspended forms in the river waters, and their dissolved form concentrations tended to increase with the water discharge. On the other hand, non-adsorptive elements such as alkali and alkaline-earth elements were present as dissolved forms under a normal flow rate condition, but equivalent quantity of suspended species also occurred under a high flow condition. In this case, the dissolved form concentrations decreased with the water discharge. Characterization of SPM with analyses of chemical compositions, scanning electron microscopy (SEM) and X-ray diffractometry (XRD) indicated that clay mineral such as montmorillonite would be the main carrier material of trace and major elements during the fluvial transport in the Kuji River. Variations of contents of selected elements in SPM with the water discharge indicated that river bottom sediments, which are probably potential sources of SPM added due to high water flow rates, would be different in chemical compositions from SPM floating under a normal flow condition. Variations of chemical compositions of SPM as well as of suspended or dissolved form concentrations of elements in the river waters were formulated as a function of the water discharge rates.     

Anthropogenic 236U at Rocky Flats,Ashtabula river harbor,and Mersey estuary: three case studies by sector inductively coupled plasma mass spectrometry

236U (t(1/2)=2.3 x 10(7) y) is formed as a result of thermal neutron capture by (235)U. In naturally occurring U ores, where a high neutron flux is present from spontaneous fission of (238)U, (236)U/(238)U atom ratios are approximately 10(-4) ppm. In the natural Earth's crust, unaffected by nuclear fallout, these ratios are expected to be on the order of 10(-8) ppm. Reactor-irradiated U, however, exhibits high (236)U/(238)U atom ratios approaching 10(4) ppm. As a result, the presence of very small quantities of reactor-irradiated U will significantly enhance the "background" (236)U/(238)U atom ratio. When sufficiently elevated (236)U/(238)U ratios are present, the determination of (236)U/(238)U by rapid inductively coupled plasma mass spectrometric (ICPMS) methods is attractive. We have used sector ICPMS at medium resolving power (R=3440) to measure (236)U/(238)U atom ratios with a determination limit of 0.2 ppm. The limiting factors in the measurement are the (235)U(1)H(+) isobar and background signal at m/z 236 arising from the (238)U(+) peak tail. Based upon the analysis of replicates and considerations of possible systematic errors, uncertainties of +/-5% are found for (236)U/(238)U atom ratios of 1-100 ppm. This procedure has been demonstrated in studies of anthropogenic (236)U in the environment at three locations: (a) offsite soils from the vicinity of the Rocky Flats Environmental Technology site (Golden, Colorado, USA); (b) sediments from the Ashtabula River (Ohio, USA); and (c) sediments from the Mersey estuary (Liverpool, UK). In each of these three locations, definite plumes of elevated (236)U/(238)U are identified and characterized. Maximum (236)U/(238)U atom ratios observed in RFETS-vicinity soils, the Ashtabula River, and the Mersey Estuary are 2.8, 140, and 4.4 ppm, respectively.     

Temporal variation of 137Cs water column inventory in the North Pacific since the 1960s

The temporal variation of water column inventories of 137Cs in the North Pacific since the 1960s was examined based on the analysis of the 137Cs profiles in HAM database. 137Cs in seawater in the North Pacific have originated mainly from global fallout from atmospheric nuclear weapons tests, which occurred in the early 1960s. In the 1960s, both the meridional distribution of 137Cs inventory in the North Pacific and that of fallout on land stations showed mid-latitude maximum. The region with higher deposition at land stations, however, was more northern than the latitudes where the 137Cs inventory in the North Pacific showed a maximum. The difference of the latitude where maximum 137Cs deposition/inventory was observed reflects the difference of the geographical distribution of the precipitation amount in the Pacific and Atlantic Oceans followed by the different warm current systems in each ocean. A good positive relation between 137Cs inventory and annual precipitation amount was discovered in the ocean stations at the middle latitude in the North Pacific. The horizontal distribution of 137Cs inventories at the middle latitudes in the North Pacific is characterized as west-high and east-low in the early 1960s, which was basically controlled by the distribution of annual precipitation amount. Eastward advection, then, modified it to be less difference in 1966-1967 after the highest deposition periods in 1963-1965. In the 1970s and 1980s, increases of the 137Cs inventory at the lower latitude of 10-20 deg. N are found. Surface and subsurface southward transports are considered as the source of this increasing 137Cs inventory.     

226Ra, 40K and 7Be activity concentrations in plants in the environment of Kaiga,India

Leaves, stem and bark samples from several plant species were collected from tropical forest of Kaiga, in the west coast of India where two nuclear power reactors of 220 MW each have just been commissioned and another two are under construction, and analysed for their (226)Ra, (40)K and (7)Be concentrations. The activities of (226)Ra and (40)K in plants were found to vary in the range BDL-13.2 and 12.0-797.3 Bq kg(-1), respectively. Plants show significant (7)Be activity in leaves, the activity varies in 72.5-1,060.8 Bq kg(-1). Stem and bark of plants show higher levels of (226)Ra and (40)K when compared to leaves. Soil-to-plant transfer factor for (226)Ra and (40)K were found to vary in the range BDL-0.37 and 0.09-5.61, respectively for different plants. The concentration of (226)Ra and (40)K in leaves depends on the age of the leaves.     

A kinetic-allometric approach to predicting tissue radionuclide concentrations for biota

Allometry, or the biology of scaling, is the study of size and its consequences. It has become a useful tool for comparative physiology. There are several allometric equations that relate body size to many parameters, including ingestion rate, lifespan, inhalation rate, home range and more. While these equations were originally derived from empirical observations, there is a growing body of evidence that these relationships have their origins in the dynamics of energy transport mechanisms. As part of an ongoing effort by the Department of Energy in developing generic methods for evaluating radiation dose to biota, we have examined the utility of applying allometric techniques to predicting radionuclide tissue concentration across a large range of terrestrial and riparian species of animals. This particular study examined 23 radionuclides. Initial investigations suggest that the allometric approach can provide a useful tool to derive limiting values of uptake and elimination factors for animals.