Influence of Oxygenated Fuels on the Emissions from Three Pre-1985 Light-Duty Passenger Vehicles

Tailpipe and evaporative emissions from three pre-1985 passenger motor vehicles operating on an oxygenated blend fuel and on a nonoxygenated base fuel were characterized. Emission data were collected for vehicles operating over the Federal Test Procedure at 40,75, and 90°F to simulate ambient driving conditions. The two fuels tested were a commercial summer grade regular gasoline (the nonoxygenated base fuel) and an oxygenated fuel containing 9.5 percent methyl tert-butyl ether (MTBE), more olefins, and fewer aromatics than the base fuel. The emissions measured were total hydrocarbons (THCs), speciated hydrocarbons, speciated aldehydes, carbon monoxide (CO), oxides of nitrogen (NO_x), benzene, and 1,3-butadiene.

This study showed no pattern of tailpipe regulated emission reduction when oxygenated fuel was used. Tailpipe emissions from the 1984 Buick Century without a catalyst and the 1977 Mustang with catalyst decreased with the MTBE fuel. However, emissions from the 1984 Buick Century and the 1980 Chevrolet Citation, both fitted with catalysts increased. The vehicles emitted more 1,3- butadiene and, in general, more NO_x when operated with the base fuel.

THC, CO, benzene, and 1,3-butadiene emissions from both fuels and all vehicles, in general, decreased with increasing test temperature, whereas NO_x emissions, in general, increased with increasing test temperature. Formaldehyde, acetaldehyde, and total aldehydes also showed a decrease in emissions as test temperature increased. More formaldehyde was emitted when the MTBE fuel was used.

Evaporative, diurnal, and hot soak emissions from the base fuel were greater than those from the MTBE fuel. The evaporated emissions from both fuels increased with increasing test temperatures. Diurnal data indicate that canister conditioning (bringing the evaporative charcoal canister to equilibrium) is required before testing.     

Seasonal impact of blending oxygenated organics with gasoline on motor vehicle tailpipe and evaporative emissions.

Emissions from a 1988 GM Corsica with adaptive learning closed loop control were measured with 4 fuels at 40, 75, and 90 degrees F. Evaporative and exhaust emissions were examined from each fuel at each test temperature. Test fuels were unleaded summer grade gasoline; a blend of this gasoline containing 8.1 percent ethanol; a refiner's blend stock; and the blend stock containing 16.2 percent methyl tertiary butyl ether. The ethanol and MTBE blends contained 3.0 percent oxygen by weight. Regulated emissions (total hydrocarbons, carbon monoxide, and oxides of nitrogen), detailed aldehydes, detailed hydrocarbons, ethanol, MTBE, benzene, and 1,3-butadiene were determined. The highest levels of regulated emissions were produced at the lower temperature. Blended fuels produced almost twice the evaporative hydrocarbon emissions at high temperatures as did the base fuels. Benzene emissions varied with fuels and operating temperatures, while 1,3-butadiene emissions decreased slightly with increasing temperatures. Formaldehyde emissions were not sensitive to fuel or temperature changes. Ethanol fuel blend total aldehyde emissions increased by 40 percent due to increased acetaldehyde emissions. Fuel blends had approximately a 3 percent economy decrease. The MTBE fuel blend appeared to offer the most reduction in total hydrocarbon, carbon monoxide, and oxides of nitrogen for the fuels and temperatures tested.     

Can the legacy of industrial pollution influence antimicrobial resistance in estuarine sediments?

Antimicrobial resistance (AMR) represents a major global health threat, as well as a major hazard to sustainable economic development and national security. It remains, therefore, vital that current research aligns to policy development and implementation to alleviate a potential crisis. One must consider, for example, whether drivers of antibiotic resistance can be controlled in the future, or have they already accumulated in the past, whether from antibiotics and/or other pollutants? Unfortunately, industrial heritage and its pollution impact on the prevalence of environmental AMR have largely been ignored. Focussing on industrialised estuaries, we demonstrate that anthropogenic pollution inputs in addition to the natural diurnal environmental conditions can sufficiently create stressful conditions to the microbiome and thus promote selective pressures to shift the resistome (i.e., collection of resistance traits in the microbiological community). Unfortunately, the bacteria’s survival mechanisms, via co-selective pressures, can affect their susceptibility to antibiotics. This review highlights the complexity of estuarine environments, using two key contaminant groups (metals/toxic elements and polyaromatic hydrocarbons), through which a variety of possible chemical and biological pollutant stressors can promote the emergence and dissemination of antimicrobial resistance. We find compelling divers to call on more focused research on historically disrupted ecosystems, in propagating AMR in the real world.

     

CRC-APRAC Vehicle Emissions Modeling Workshop

A conference was held on October 30-31,1990 to examine discrepancies between the output of vehicle emission factor models (MOBILE and EMFAC), field and laboratory measurements of vehicle emissions, and observed ratios of pollutants in urban atmospheres dominated by vehicle emissions. There was a general consensus that significant discrepancies exist and that these discrepancies must be resolved. A number of research recommendations were made as to how models and model inputs could be improved, and what additional laboratory and field work should be conducted.     

A Characterization of Emissions from an Early Model Flexible-Fuel Vehicle

An emission study was conducted on a 1987 Ford Crown Victoria flexible-fuel vehicle, an early prototype which had been driven about 25,000 miles. The vehicle was run on both gasoline and a blend of 85 percent methanol and 15 percent gasoline. Emission rates of regulated pollutants (hydrocarbons, carbon monoxide, nitrogen oxides, formaldehyde, and methanol) and nonregulated pollutants (speciated organic materials) were determined for both exhaust and evaporative emissions. Tests were run varying the driving cycle, ambient temperature and catalytic converter. In general, hydrocarbon composition of exhaust emissions was significantly affected by catalyst replacement and cold starts, slightly affected by driving schedule, and unaffected by ambient temperature and test fuel. Hydrocarbon composition of evaporative emissions was only sensitive to the type of evaporative test being performed: diurnal tests typically had larger fractions of lower molecular weight paraffins than hot soak tests.     

The Effect of Ethanol Fuel on the Emissions of Vehicles over a Wide Range of Temperatures

ABSTRACT

The emissions from a fleet of 11 vehicles, including three from the State of Alaska, were tested at 75, 0, and -20 °F with base gasolines and E10 gasolines, that is, gasolines with 10% by volume ethanol added. The data for the changes in emissions for the test run at 75 °F are included, since most other studies on the effects of E10 gasoline on emissions were run at that temperature. The three Alaskan vehicles were also tested at 20 °F. The testing followed the Federal Test Procedure, and regulated emissions—CO, total hydrocarbons (THC), and nitrogen oxides (NO_x)—CO₂, speciated organics, and fuel economy were measured. A total of 490 FTP tests were run. The data obtained indicated that with most vehicles, at the temperatures tested, improvements in both CO and THC emissions were obtained with the use of E10 fuel. At the lowest temperature used, -20 °F, most vehicles had an increase in NO emissions with the use of E10 fuel. At the other temperatures, however, more vehicles showed a decrease in NO_x emissions with the use of E10. With all vehicles at all temperatures tested, the emissions of acetaldehyde increased significantly when E10 fuel was used. The highest increase was about 8 to 1. Benzene, formaldehyde, and 1,3 butadiene showed both increases and decreases in the emissions when using E10 fuel. Unexpected results were obtained with the fuel economy, with about half of the tests showing an increase in fuel economy with the use of E10 fuel.     

REUSE OF AGRICULTURAL DRAINAGE WATERS: AN ECONOMIC ANALYSIS1

ABSTRACT The profitability of reusing agricultural drainage water for crop production depends on the salt tolerance of the crop being grown the salt concentration of the drainage water, the cost of obtaining it and price of good water. In the this paper the economics of drainwater resue is examined for six crops in two areas of southern California. The results suggest that drainwater reuse is not profitable for the fruit and vegetable crops considered but is profitable for the field crops considered when the price of good water is relatively high and cost of obtaining the draingage water is low.