Prenatal diagnosis of chinese homozygous α-thalassaemia 1 and haemoglobin H disease by analysis of α- and φζ-globin genes in chorionic villi and amniocytes

Eighty-eight high-risk pregnancies, 81 for homozygous α-thalassaemia 1 and 7 for haemoglobin (Hb) H disease, were collected in this study. Chorionic villus sampling (CVS) was done in 63 cases and amniocentesis in 25 cases to obtain fetal cells. Southern blotting and DNA hybridization with α- and φζ-globin gene probes were used to determine the α-globin gene status. In two non-informative families with non-deletional mutations, DNA analysis failed to rule out the affected condition, and fetal blood sampling (FBS) and Hb electrophoresis were used for the final diagnosis. In the 81 fetuses at risk for homozygous α-thalassaemia 1, 17 (13 by CVS and 4 by amniocentesis) were afffected, 30 were α-thalassaemia 1 heterozygotes, 19 were normal, and the remaining 15 were either normal or heterozygous. In the seven fetuses at risk for Hb H disease, one was normal, three were α-thalassaemia 1 heterozygotes, two were α-thalassaemia 2 heterozygotes, and one was affected with Hb H disease and developed hydrops fetalis. DNA analysis on fetal cells enabled us to diagnose prenatally severe α-thalassaemias, to prevent the birth of infants with Hb H disease, and to minimize maternal obstetrical complications from harbouring a fetus with Hb Bart's hydrops fetalis.     

Investigation and risk assessment modeling of As and other heavy metals contamination around five abandoned metal mines in Korea

Tailings, agricultural soils, vegetables and groundwater samples were collected from abandoned metal mines (Duckum, Dongil, Dongjung, Myoungbong and Songchun mines) in Korea. Total concentrations of arsenic (As) and heavy metals (Cd, Cu, Pb and Zn) were analyzed to investigate the contamination level. Several digestion methods (Toxicity characteristics leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), 0.1 N/1 N HCl) and sequential extraction analysis for mine tailings were conducted to examine the potential leachability of As and heavy metals from the tailings. The order of urgent remediation for the studied mines based on the risk assessment and remedial goals was suggested. The Songchun mine tailings were most severely contaminated by As and heavy metals. Total concentrations of As and Pb in the tailings were 38,600–58,700 mg/kg (av. 47,400 mg/kg) and 11,800–16,800 mg/kg (av. 14,600 mg/kg), respectively. Agricultural soils having high As concentrations were found at the all mines. Average concentrations of Cd in the vegetables exceeded the normal value at all mines areas, while As only at the Dongjung, Myoungbong, and Songchun mine area. One groundwater sample each from the Dongil and Myoungbong mines, and 4 groundwater samples from the Songchun mine had values above 10 μg/L of As concentration. The TCLP method revealed that only Pb in the Songchun tailings, 6.49 mg/L, exceeded the regulatory level (5 mg/L). Employing the 1-N HCl digestion method, the concentration of As in the Songchun mine tailings, 4,250 mg/kg, was up to 3,000 times higher than its Korean countermeasure standard. Results from the sequential extraction of As in the tailings showed that the easily releasable fraction in the Myoungbong and Songchun mine tailings was more than 30% and the residual fraction was less than 40%. Based on results showing the exposure health risk employing the hazard quotient and cancer risk of As, Cd and Zn, the Dongil mine needs the most urgent remedial action. The concentration reduction factor (CRF) of As in both soil and groundwater follows the order: Songchun>Dongjung>Dongil>Myoungbong>Duckum mine.     

Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture

The purpose of this study was to combine the physical pretreatments of grinding, sieving, and magnetic-separation processes to reclaim iron-rich materials from the desulfurization slag, and to use the remainder for cement clinker production. The iron-rich materials can be separated out efficiently by grinding for 30 min and sieving with a 0.3 mm mesh. The non-magnetic fraction of the particles smaller than 0.3 mm was in the majority, and proved to be suitable for use as a cement raw material. The raw mixes prepared with a pretreated desulfurization slag had a relatively high reactivity, and the temperature at which alite forms was significantly reduced during the clinkerization process. The clinkers produced with 10% desulfurization slag had a high level of alite and good grindability. Generally, the improvements in clinkerization and clinker grindability are beneficial to energy conservation in cement manufacture.     

Removal of anthelmintic drugs and their photodegradation products from water with RO/NF membranes

Photolytic reactions are often complex, involving various competing or parallel pathways and leading to multiple reaction products. Removal of anthelmintic drugs (AD) – levamisole (LEV), albendazole (ABZ), praziquantel (PZQ), febantel (FEBA) from water and their photodegradation products with reverse osmosis (RO) and nanofiltration (NF) membranes were investigated in this work. Simulation of photodegradation of ADs was carried out under laboratory conditions with UV lamp at a wavelength of 254 nm for 4 h.Reverse osmosis (LFC–1 and XLE) and tight nanofiltration (NF90) membranes showed good removal (>83%) of anthelmintic drugs in binary solutions and in mixture. Other nanofiltration (NF270, NF and DK) membranes had rejection between 22 and 45% for smaller drugs (LEV and ALB) and >90% for PZQ and FEBA. These results show that main rejection mechanism in binary solutions was size exclusion and in mixture additional physico-chemical interactions had influence.After the UV treatment anthelmintic drugs were degraded into several photodegradation products (5 for LEV, 2 for ABZ, 1 for PZQ and 8 for FEBA). Reverse osmosis and NF90 membranes removed >95% of all photodegradation products (except FEBA₁ around 70%) and other nanofiltration membranes between 33 and 99.99%.     

The kinetic of the catalytic decomposition of methyl isobutyl ketone over a Pt/gamma-Al2O3 catalyst

Environmental catalysis also can refer to catalytic technologies for reducing emission of environmentally unacceptable compounds. Catalytic decomposition also is one of the cost-effective technologies to solve the troublesome volatile organic compounds. This study treated methyl isobutyl ketone (MIBK) by a commercial catalyst, Pt/gamma-Al(2)O(3), in an isothermal fixed bed differential reactor. The effects of O(2) and MIBK content in carrier gas on the catalysis's reaction rate are also observed. Three kinetic models, i.e. the Mars and van Krevelen model, Langmuir-Hinshelwood model and power-rate law were applied to best fit the experimental results. The results indicate that the kinetic behavior of MIBK oxidation with catalysis can be accounted for by using the rate expression of the Mars and van Krevelen model and Langmuir-Hinshelwood model. Kinetic parameters are also determined on the basis of the differential reactor data. The experimental results are compared with those of the model predicted.     

Enhanced desorption of phenanthrene from soils using hydroxypropyl-beta-cyclodextrin: experimental results and model predictions

Objective of this study was to evaluate the effects of hydroxypropyl-beta-cyclodextrin (HPCD) on the removal of phenanthrene from solid phase. Batch tests for the phenanthrene distribution between aqueous and solid phase were conducted in the presence of HPCD. Column tests and numerical simulations were conducted to evaluate the roles of HPCD cavities and interaction rates between water, HPCD, and solid phase in the enhanced removal of phenanthrene. Experimental results showed that HPCD was effective in removing sorbed phenanthrene from subsurface environment, primarily due to its negligible sorption to the solid phase and the partitioning of phenanthrene into HPCD cavities. From the numerical simulations, it was found that rate-limited partitioning of phenanthrene into HPCD cavities was most influential factor in the enhanced elution of phenanthrene. Sorption and desorption rate of phenanthrene between aqueous and solid phase was very fast or near equilibrium state. Interaction rates of contaminant between water, HPCD, and solid phase could be affected by other factors such as soil types and organic matter contents. Results from this study implied that HPCD flushing could be effectively applied for the removal of hydrophobic organic pollutants existing in the soils as sorbed or NAPL state.     

Effects of ozonation and coagulation on effluent organic matter characteristics and ultrafiltration membrane fouling

Effluent organic matter （EfOM） is the major cause of fouling in the low pressure membranes process for wastewater reuse. Coagulation and oxidation of biological wastewater treatment effluent have been applied for the fouling control of microfiltration membranes. However, the change in EfOM structure by pre-treatments has not been clearly identified. The changes of EfOM characteristics induced by coagulation and ozonation were investigated through size exclusion chromatography, UV/Vis spectrophotometry, fluorescence spectrophotometry and titrimetric analysis to identify the mechanisms in the reduction of ultrafiltration （UF） membrane fouling. The results indicated that reduction of flux decline by coagulation was due to modified characteristics of dissolved organic carbon （DOC） content. Total concentration of DOC was not reduced by ozonation. However, the mass fraction of the molecules with molecular weight larger than 5 kDa, fluorescence intensity, aromaticity, highly condensed chromophores, average molecular weight and soluble microbial byproducts decreased greatly after ozonation. These results indicated that EfOM was partially oxidized by ozonation to low molecular weight, highly charged compounds with abundant electron- withdrawing functional groups, which are favourable for alleviating UF membrane flux decline.