A critical analysis of earthquakes and urban planning in Turkey

The land use plans and policies of developed countries that live with the threat of earthquakes are gaining importance in reducing or eliminating the long‐term threat to people and property. In developing countries, however, these plans and policies seem to increase the level of vulnerability. This paper examines the effects of the earthquakes that have occurred in Turkey since 1992, with a particular focus on urbanisation and planning policies. It is based on extensive surveys carried out on location immediately after the earthquakes in Erzincan and Kocaeli‐Gölcük in 1992 and 1999, respectively. The analysis takes into account several factors, including the height of buildings, geological conditions and the construction period. The authors conclude that land use planning can serve as a very useful instrument for mitigating the extent of disaster damage if it is part of an appropriate planning system. In the case of Turkey, the planning system needs to be reorganised for this purpose.     

The sorption of hydrogen sulfide from hot syngas by metal oxides over supports

Six 5 wt.% metal sorbents including Mn, Fe, Cu, Co, Ce and Zn supported on gamma-Al2O3, prepared by the incipient wetness impregnation method with calcination at 700 degrees C for 2 h, have been investigated for sorption of hydrogen sulfide in the temperature range of 500-700 degrees C. The sorption experiments were conducted in a fixed-bed reactor in terms of breakthrough curves and characterized by X-ray powder diffraction. The results reveal that the copper and manganese sorbents exhibit the best performance because they provide nearly 100% utilization, but the copper sorbent has a lower sulfur sorption capacity compared with the manganese sorbent. The zinc and cerium sorbents are not good candidates attributed to the vaporization of zinc and unexpected product for cerium. Effects of support materials on 5 wt.% manganese were also investigated by using gamma-Al2O3, SiO2 and TiO2 in this study. Five weight percent Mn/gamma-Al2O3 shows the best performance among support candidates. On the basis of XRPD and BET surface area analysis, TiO2 appears a huge loss in BET surface area associated with a significant formation of rutile form.     

Geochemical and Geophysical Monitoring of Salinewater Intrusion in Korean Paddy Fields

The saline water intruded zone in paddy fields near the seashore can be diagnosed accurately by joint exploration with geophysical and geochemical methods. Using the electromagnetic (EM) sounding technique, the weakly consolidated zone which introduces saline water into such an area of near seashore paddy fields in Korea was detected from the variation of electrical conductivity distribution following field irrigation. Vertical electrical sounding (VES) with Schlumberger array and chemical analysis of top soils, and groundwater in the study area verified the intruded zone near the surface. The VES results showed that the intrusion of seawater occurred in the form of a channel down to 30 m below sea level. Geochemical analysis of the top soil samples for the six major elements found in seawater indicated that the region showing high concentrations is concordant with the weakly consolidated zone near the surface. The degree of contamination in the study area was investigated by comparing the soil data with those from a nearby old reclamation field. If remediation work is not done for this intrusion zone, the sodicity degree in the paddy soil is expected to increase compared with the reference site data.     

Work-related injuries of educational support staff in schools

This study aims to describe the characteristics of occupational injuries to educational support staff (service worker) in schools. In this research, 803 injured workers registered in 2015 were analyzed in terms of their gender, age, work experience, school type, work type, accident type, agency of accident, nature of injury and injured part of the body for each occupation. The workers were classified into after-school instructor, custodian and cooking staff. Accidents occurred mainly due to slips (35.6%) on floor/stair or contact with high temperature (18.1%). Also, the workers mostly fractured (41.2%) or had burns (19.3%) on their leg/foot (37.1%) or arm/hand/finger (29.8%). The results showed the difference in characteristics and injury pattern of injured persons for each occupation type, addressing the need for customized preventative measures for each situation. The results of this study can be a baseline in devising policies and guidelines for preventing accidents of service workers in schools.     

Stabilization of Cu-contaminated army firing range soils using waste oyster shells

A stabilization/solidification (S/S) process was used to immobilize Cu in contaminated soils obtained from two army firing ranges sites (A and B) with total Cu concentrations of 520 and 380 mg/kg, respectively. Both waste oyster shells (WOS) and pretreated oyster shells (POS) were used to immobilize Cu in the contaminated soils. Waste oyster shells passing the #10 mesh and #20 mesh were used for the Sites A and B, respectively. WOS- and POS-treated soil samples cured for 28 days were evaluated for Cu leaching by the Korean Standard Leaching Test (KSLT) method. Slurry suspensions were prepared to investigate the Cu immobilization mechanism using X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) energy dispersive X-ray spectroscopy (EDX) analyses. The treatment results showed that the POS treatment was more effective than the WOS treatment of 28 days. For Site A, 10 wt% WOS and 3 wt% POS dosages were required to pass the Korean warning standard of 50 mg/kg, while 10 wt% WOS and 5 wt% POS dosages were required for the Site B treatment. The XRPD and SEM-EDX results showed that Cu immobilization was strongly linked to both CSH/CAH and ettringite. Overall, the POS treatment was effective at immobilizing the Cu in the contaminated soils, very likely due to its CaO content.     

Applying mass transfer models for controlling organic compounds in ozonation process

Mass transfer plays a significant role in the ozonation process. The prediction models associated with the volumetric overall mass transfer coefficient (K_La) and initial fractional ozone absorption (FOA₀) during the ozonation process were developed through the use of dimensional analysis. It was found that the volumetric overall mass transfer coefficient is the function of diffusivity, agitation speed, and gas flow rate, and the parameters in the K_La equation are determined. Application of the prediction models for K_La and FOA₀ would yield information to choose the most practically feasible operating parameters. The removability of total organic carbon (TOC) can be estimated based on the mass balance relationship and kinetic expression of TOC oxidation, during continuous laboratory ozonation of humic acid solution. The reaction rate constant averaged 0.0291 L/mg·min. The developed model in combination with the mass transfer and reaction kinetics can be used successfully in forecasting the most efficient agitation speed to control the formation of organic compounds. Also, the critical value of ozone partial pressure to achieve the highest TOC removability can be determined through the use of the above developed model.     

Ozone influence on native vegetation in the Jizerske hory Mts. of the Czech Republic: results based on ozone exposure and ozone-induced visible symptoms

Ozone levels in the Jizerske hory Mts. measured at 13 sites by diffusive samplers during the 2006 and 2007 vegetation seasons are presented. A significant ozone gradient (5.4 ppb in 2006 and 4.0 ppb in 2007) per 100 m difference in altitude between 370 and 1,100 m a.s.l. was recorded. High-resolution maps of phytotoxic potential were developed. The AOT40 threshold (5 ppm h) was exceeded over the entire area with the highest levels exceeding this threshold by 12 times in the upper portions of the mountains. Ozone visible injury was evaluated at four of the monitoring sites on seven native plant and tree species. Four species showed ozone-like symptoms, two of which (Rubus idaeus and Fagus sylvatica) were confirmed as ozone-induced. Our results indicate that ambient ozone is likely to have a much lower impact on the Jizerske hory Mts. vegetation than expected, considering the measured ambient ozone exposures and favourable environmental conditions for ozone uptake.     

Distribution of polychlorinated biphenyls and organochlorine pesticides in wild mussels from two different sites in central Croatian Adriatic coast

Levels of 24 organochlorine compounds were investigated in wild mussels collected at two locations (Krka estuary and Ka?tela Bay) on the Croatian Adriatic coast in 2003, 2005, 2006, 2007, and 2008. PCB and OCP ranges found at the two locations overlapped and followed similar profiles despite the differences between the two locations indicating that they share a common pollutants source. Among organochlorine pesticides, the dominant compound was DDT. Among indicator PCBs, the dominant compound was PCB-153, while PCB-118 was dominant among the remaining 11 congeners. Generally, the sum of six indicator PCBs was constantly greater than the sum of 11 congeners at both locations. α-HCH/γ-HCH and DDE/DDT ratios were below 1, indicating recent input of γ-HCH and DDT into the marine environment. In the investigated period, almost all organochlorine compounds reached the highest values in 2006. The levels of PCBs and OCPs in this study were considerably below the Croatian maximum permissible levels, confirming that they do not pose any threat for human health.     

Emission of particulate and gaseous pollutants from household laser processing machine

Indoor air quality (IAQ) directly affects the health of occupants. Household manufacturing equipment (HME) used for hobbies or educational purposes is a new and unexplored source of air pollution. In this study, we evaluated the characteristics of particulate and gaseous pollutants produced by a household laser processing equipment (HLPE). Various target materials were tested using a commercial HLPE under various operating conditions of laser power and sheath air flow rate. The mode diameters of the emitted particles gradually decreased as laser power increased, while the particle number concentration (PNC) and particle emission rate (PER) increased. In addition, as the sheath air flow rate quadrupled from 10 to 40 L/min, the mode diameter of the emitted particles decreased by nearly 25%, but the effect on the PNC was insignificant. When the laser induced the target materials at 53 mW, the mode diameters of particles were <150 nm, and PNCs were >2.0 × 10⁴ particles/cm³. Particularly, analyses of sampled aerosols indicated that harmful substances such as sulfur and barium were present in particles emitted from leather. The carcinogenic gaseous pollutants such as acrylonitrile, acetaldehyde, 1,3-butadiene, benzene, and C₈ aromatics (ethylbenzene) were emitted from all target materials. In an actual indoor environment, the PNC of inhalable ultrafine particles (UFPs) was >5 × 10⁴ particles/cm³ during 30 min of HLPE operation. Our results suggest that more meticulous control methods are needed, including the use of less harmful target materials along with filters or adsorbents that prevent emission of pollutants.     

The role of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans in arsenic bioleaching from soil

Bioleaching of As from the soil in an abandoned Ag–Au mine was carried out using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. A. ferrooxidans is an iron oxidizer and A. thiooxidans is a sulfur oxidizer. These two microbes are acidophilic and chemoautotrophic microbes. Soil samples were collected from the Myoungbong and Songcheon mines. The main contaminant of the soil was As, with an average concentration of 4,624 mg/kg at Myoungbong and 5,590 mg/kg at Songcheon. A. ferrooxidans and A. thiooxidans generated lower pH conditions during their metabolism process. The bioleaching of As from soil has a higher removal efficiency than chemical leaching. A. ferrooxidans could remove 70 % of the As from the Myoungbong and Songcheon soils; however, A. thiooxidans extracted only 40 % of the As from the Myoungbong soil. This study shows that bioleaching is an effective process for As removal from soil.