Microwave Plasma Conversion of Volatile Organic Compounds

Abstract

A microwave-induced, steam/Ar/O₂ , plasma “torch” was operated at atmospheric pressure to determine the feasibility of destroying volatile organic compounds (VOCs) of concern. The plasma process can be coupled with adsorbent technology by providing steam as the fluid carrier for desorbing the VOCs from an adsorbent. Hence, N₂ can be excluded by using a relatively inexpensive carrier gas, and thermal formation of oxides of nitrogen (NO_x ) is avoided in the plasma.

The objectives of the study were to evaluate the technical feasibility of destroying VOCs from gas streams by using a commercially available microwave plasma torch and to examine whether significant byproducts were produced. Trichloroethene (TCE) and toluene (TOL) were added as representative VOCs of interest to a flow that contained Ar as a carrier gas in addition to O₂ and steam.The O₂ was necessary to ensure that undesirable byproducts were not formed in the process. Microwave power applied at 500–600 W was found to be sufficient to achieve the destruction of the test compounds, down to the detection limits of the gas chromatograph that was used in the analysis. Samples of the postmicrowave gases were collected on sorbent tubes for the analysis of dioxins and other byproducts. No hazardous byproducts were detected when sufficient O₂ was added to the flow. The destruction efficiency at a fixed microwave power improved with the addition of steam to the flow that passed through the torch.     

The influence of biomass energy consumption on CO<Subscript>2</Subscript> emissions: a wavelet coherence approach

In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables’ efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO₂ emissions in the long run cycles after the year 2005 in the USA.     

Field application of electrokinetic remediation for multi-metal contaminated paddy soil using two-dimensional electrode configuration

In this study, we evaluated the feasibility of in situ electrokinetic remediation for arsenic (As)-, copper (Cu)-, and lead (Pb)-contaminated soil, in a pilot-scale field application with two-dimensional electrode configurations. Square and hexagonal configurations with different electrode spacing, 1 m and 2?m, were investigated under a constant 100 V. A square configuration with electrode spacing of 2 m removed 61.5 % of As, 11.4 % of Cu, and 0.9 % of Pb, respectively, and a hexagonal configuration with the same spacing showed a higher removal efficiency in top (59 % of As, 0–0.5 m) and middle (53 % of As, 0.5–1.0 m) layers, but much lower removal efficiency in the bottom layer (1–1.5 m), which was thought to be due to groundwater flow through periodic rise and fall of tides. Fractionation analysis showed that As bound to Fe–Mn oxyhydroxide was the main form of As removed by the electrokinetic process. The two-dimensional configuration wasted less electrical energy by Joule heating, and required fewer electrode installations, compared to the one-dimensional electrode configuration.     

模拟生物反应器加速产甲烷过程研究

渗滤液原液回灌易导致填埋垃圾产甲烷过程的滞后,从而对甲烷收集利用产生不利影响。通过3根实验室模拟生物反应器,研究了原液回灌(C1)、渗滤液好氧预处理后回灌(C2)和原液回灌+垃圾层上部通风曝气(C3)3种填埋方式下的填埋气产气规律。结果表明,C1甲烷浓度经历短暂上升,达到19.5%后开始逐渐降低,产甲烷速率和产甲烷总量均很低;C2甲烷浓度逐渐上升,在第121天时甲烷浓度达到50%,产甲烷最高速率和产甲烷总量分别为0.31 L/(kg·d)和25.2 L/kg。在停止上部垃圾层通风曝气后,C3甲烷浓度迅速上升,在81 d时甲烷浓度便达到50%以上,最大产甲烷速率和产甲烷总量分别为0.22 L/(kg·d)和16.0 L/kg。对各模拟柱填埋气可回收性评价结果表明,C3填埋气可回收利用比例最高,C2略低,C1在实验期间内则无可回收利用气体产生。     

Comparisons of metal leachability for various wastes by extraction and leaching methods

The objective of this research was to evaluate three extraction tests, i.e., toxicity characteristic leaching procedures (TCLP), extraction procedure (EP), and American Society for Testing and Materials (ASTM) methods, for their ability to extract metals in chemical sludge and incineration bottom ash, in terms of the precision of analytical results. Typical chemical sludges, including the electroplating and dye-stuff sludges, the municipal solid waste incineration bottom ash, the leather debris, and the steel-mill bottom residue containing Cd, Cr, Cu, Pb, and Zn were prepared for the lysimetry test (dynamic testing) to compare with the extraction results. Results show that for bottom residue and dye-stuff sludge, the concentration of metal leached was almost the same between the lysimetry leaching and the TCLP tests. The metal concentration followed the order: TCLP approximately = EP > ASTM. TCLP and EP exhibited almost the same relative standard deviation (RSD) value. Therefore, the results of the TCLP tests for bottom residue and dye-stuff sludge, which have a low metal content and alkalinity, can be used to estimate the metal concentration leached by typical acid rain in Taiwan; whereas the ASTM extraction test may be a better indicator of the lysimetry test.     

Survey of dioxin sources in the Baltic Region (extended summary)

The present paper summarises the results of the project: 'Survey of Anthropogenic Sources of Dioxins and Furans in the Baltic Region'. As a part of the project, inventories have been carried out in Estonia, Latvia, Lithuania and Poland by applying the toolkit for quantification of dioxin and furan releases developed by UNEP Chemicals. The main route of direct releases to the environment is emission to air. Total emission to air from Poland was estimated at 490 (88-1,300) g I-TEQ/year, whereas the emissions from Estonia, Latvia and Lithuania were estimated as being 14 (2.4-54), 23 (2.6-63) and 17 (2.6-38) g I-TEQ, respectively. In general, the uncertainty on the estimates is very high, and recommendations regarding further development of the inventories have been made, and measures for reducing the releases have been provided.     

Analysis of polychlorodibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) in baked-salt food additives in Korea

Thirty-one samples of baked-salt products used in commercial food additives were analyzed for the presence of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). Dioxins were highly detected in 12 samples of baked salts. The amount of dioxins found in the samples ranged from 12.47 pg/g to 406.56 pg/g (0.71 pg TEQ/g to 23.51 pg TEQ/g, respectively). The most abundant congeners, as TEQ values, were 2,3,4,7,8-PeCDF; 1,2,3,7,8-PeCDF; and 1,2,3,4,7,8-HxCDF in PCDF congeners and 1,2,3,7,8-PeCDD; 1,2,3,6,7,8-HxCDD; and 1,2,3,7,8,9-HxCDD in PCDD congeners. Meanwhile, PCDDs/PCDFs were analyzed in high-temperature-treated samples of natural sea salt alone and natural sea salt to which di-(2-ethylhexyl)phthalate (DEHP) had been added. In the former case, PCDD/PCDF formation was most evident at temperatures near 450 degrees C, the total amount of dioxins was 90.07 pg/g (6.07 pg TEQ/g), and PCDD congeners comprised less than 50% of the total PCDDs/PCDFs. However, when the latter samples were heated, the total PCDD/PCDF concentration was 512.30 pg/g (21.53 pg TEQ/g), with PCDD congeners comprising over 87% of the total PCDDs/PCDFs.     

A critical analysis of earthquakes and urban planning in Turkey

The land use plans and policies of developed countries that live with the threat of earthquakes are gaining importance in reducing or eliminating the long‐term threat to people and property. In developing countries, however, these plans and policies seem to increase the level of vulnerability. This paper examines the effects of the earthquakes that have occurred in Turkey since 1992, with a particular focus on urbanisation and planning policies. It is based on extensive surveys carried out on location immediately after the earthquakes in Erzincan and Kocaeli‐Gölcük in 1992 and 1999, respectively. The analysis takes into account several factors, including the height of buildings, geological conditions and the construction period. The authors conclude that land use planning can serve as a very useful instrument for mitigating the extent of disaster damage if it is part of an appropriate planning system. In the case of Turkey, the planning system needs to be reorganised for this purpose.     

The sorption of hydrogen sulfide from hot syngas by metal oxides over supports

Six 5 wt.% metal sorbents including Mn, Fe, Cu, Co, Ce and Zn supported on gamma-Al2O3, prepared by the incipient wetness impregnation method with calcination at 700 degrees C for 2 h, have been investigated for sorption of hydrogen sulfide in the temperature range of 500-700 degrees C. The sorption experiments were conducted in a fixed-bed reactor in terms of breakthrough curves and characterized by X-ray powder diffraction. The results reveal that the copper and manganese sorbents exhibit the best performance because they provide nearly 100% utilization, but the copper sorbent has a lower sulfur sorption capacity compared with the manganese sorbent. The zinc and cerium sorbents are not good candidates attributed to the vaporization of zinc and unexpected product for cerium. Effects of support materials on 5 wt.% manganese were also investigated by using gamma-Al2O3, SiO2 and TiO2 in this study. Five weight percent Mn/gamma-Al2O3 shows the best performance among support candidates. On the basis of XRPD and BET surface area analysis, TiO2 appears a huge loss in BET surface area associated with a significant formation of rutile form.