Humic-like substances global levels and extraction methods in aerosols

Environmental Chemistry Letters - The abundance of humic-like substances in the atmosphere has received considerable attention since these substances play an important role in various atmospheric...     

Ecotoxicology of alpine streams in the West Carpathians—Alpine Bullhead (Cottus poecilopus) and high mountain flash flood effects

Environmental Science and Pollution Research - Flash floods represent a serious threat to wildlife, water biota, and human life in pre-alpine regions, particularly in recent historical memory. The...     

Fungi and wind strongly influence the temporal availability of logs in an old-growth spruce forest.

Coarse woody debris (CWD) is a key habitat for many species in forest ecosystems. To ensure the long-term survival of such species, forest management regimes must include measures that promote dead wood dynamics similar to those of natural forests. Thus, information on CWD dynamics under natural conditions is required, including data pertaining to the underlying agents of disturbance. This study examines modes of mortality, decay rates, and temporal patterns in the availability of Picea abies logs in a Swedish old-growth forest affected by internal, small-scale disturbance. All 684 logs in a 6.6-ha plot were mapped and classified into one of six decay classes. Logs in the early stages of decay were examined for the presence of heart-rot fungi. Six years later all logs were re-inventoried, including newly formed logs. Matrix models based on the transition rates between decay classes showed that it took about 60 years for 90% of the logs to decay beyond class 6 (a deformed trunk with soft wood). Large logs (> 26 cm) decayed 40% more slowly than small logs (< 25 cm). The initial volume of logs was 37.6 m3/ha but increased to 44.8 m3/ha after six years. In addition, there was a large shift in the decay-class distribution. The volume of logs in early and late decay classes increased by 71% and 45%, respectively, while the volume of logs in the intermediate decay classes decreased by 32%. The fluctuations appear to result from pulses in mortality, driven by a combination of strong winds and the heart-rot fungus, Phellinus chrysoloma, which was present in more than 30% of all logs at an early stage of decay. These results show that large temporal fluctuations in dead wood also occur in the absence of large-scale disturbance, and that heart-rot fungi are important factors driving the overall dynamics of dead wood. Since many wood-inhabiting species are naturally rare and have very specific substrate demands, such temporal variability in dead wood availability may have effects on biodiversity and should be taken into account when designing small, protected forest areas.     

Studying crop sequences with CarrotAge,a HMM-based data mining software

We have developed a knowledge discovery system based on high-order hidden Markov models for analyzing spatio-temporal data bases. This system, named CarrotAge , takes as input an array of discrete data – the rows represent the spatial sites and the columns the time slots – and builds a partition together with its a posteriori probability. CarrotAge has been developed for studying the cropping patterns of a territory. It uses therefore an agricultural drench database, named Ter-Uti , which records every year the land-use category of a set of sites regularly spaced. The results of CarrotAge are interpreted by agronomists and used in research works linking agricultural land use and water management. Moreover, CarrotAge can be used to find out and study crop sequences in large territories, that is a main question for agricultural and environmental research, as discussed in this paper.     

Effects of heavy metals on sea urchin embryo development. Part 2. Interactive toxic effects of heavy metals in synthetic mine effluents

Interactive toxic effects between heavy metals were investigated using a sea urchin (Anthocidaris crassispina) bioassay. An effluent from an abandoned mine showed significant inhibitory effects on embryo development as well as producing specific malformations. The effects on the embryos were reproduced by synthetic polluted seawater consisting of eight metals (manganese, lead, cadmium, nickel, zinc, chromium, iron, and copper) at the concentrations detected in the mine effluent. This indicated that the heavy metals were responsible for the effects observed. Five heavy metals were ranked in decreasing order of toxicity as follows: Cu>Zn>Pb>Fe>Mn. Among these, zinc and manganese could cause malformation of the embryos. From bioassay results using 27 combinations of heavy metals, 16 combinations including zinc could produce specific malformations, such as radialized, exo-gastrulal, and spaceship Apollo-like gastrulal embryos. Zinc was one of the elements responsible for causing malformations and its effects were intensified by the presence of the other metals, such as manganese, lead, iron, and copper.     

Variation in CO2 assimilation rate induced by simulated dew waters with different sources of hydroxyl radical (*OH) on the needle surfaces of Japanese red pine (Pinus densifora Sieb. et Zucc.)

The hydroxyl radical (*OH) is generated in polluted dew on the needle surfaces of Japanese red pine (Pinus densiflora Sieb. et Zucc.). This free radical, which is a potent oxidant, is assumed to be a cause of ecophysiological disorders of declining trees on the urban-facing side of Mt. Gokurakuji, western Japan. Mists of *OH-generating N(III) (HNO2 and NO2-) and HOOH + Fe + oxalate solutions (50 and 100 microM, pH 5.1-5.4) simulating the dew water were applied to the foliage of pine seedlings grown in open-top chambers in the early morning. Needles treated with 100 microM N(III) tended to have a greater maximum CO2 assimilation rate (Amax), a greater stomatal conductance (g(s)) and a greater needle nitrogen content (Nneedle), suggesting that N(III) mist acts as a fertilizer rather than as a phytotoxin. On the other hand, needles treated with 100 microM HOOH + Fe + oxalate solution showed the smallest Amax, g(s), and Nneedle, suggesting that the combination of HOOH + Fe + oxalate caused a decrease in needle productivity. The effects of HOOH + Fe + oxalate mist on pine needles were very similar to the symptoms of declining trees at Mt. Gokurakuji.     

Mutagenic nitrated benzo[a]pyrene derivatives in the reaction product of benzo[a]pyrene in NO2-air in the presence of O3 or under photoirradiation

In order to clarify the contribution of nitrated products to the direct-mutagenic activity of products of the reactions of benzo[a]pyrene in NO2-air under various conditions, heterogeneous reactions of BaP deposited on filter in the air containing 10 ppm of NO2 have been conducted in dark or under photoirradiation. The reaction products have been analyzed by gas chromatography and mutagenicity of the products fractionated by preparative HPLC was assayed for Salmonella typhimurium strains TA98 and YG1024 in the absence of S9 mix. 3,6-dinitrobenzo[a]pyrene and 1,3-dinitrobenzo[a]pyrene, which are strong direct-acting mutagens, largely contributed to the total direct-acting mutagenicity of the dark reaction products in NO2-air. On the other hand, both the dark reaction in the presence of O3 and the photoreaction in NO2-air resulted in the formation of much smaller amounts of nitrobenzo[a]pyrenes than that observed in the dark reaction in the absence of O3. These results show that the contribution of other direct-acting mutagens to the total direct-acting mutagenicity of the products in these reactions should be considered. Benzo[a]pyrene lactones were identified in a highly mutagenic fraction of the products of the dark reaction in the presence of O3 and photoreaction and a nitrobenzo[a]pyrene lactone was also identified in a highly mutagenic fraction of the dark reaction products in the presence of O3. Nitrated oxygenated benzo[a]pyrene derivatives such as nitrobenzo[a]pyrene lactone were considered to largely contribute to direct-acting mutagenicity of the products of the dark reaction in the presence of O3 and photoreaction.     

The three-dimensional prey field of the northern krill, Meganyctiphanes norvegica, and the escape responses of their copepod prey

In the north Atlantic, Meganyctiphanes norvegica feeds predominantly on copepods, including Calanus spp. To quantify its perceptual field for prey, and the sensory systems underlying prey detection, the responses of tethered krill to free-swimming Calanus spp. were observed in 3D using silhouette video imaging. An attack–which occurred despite the krill’s being tethered—was characterized by a pronounced movement of the krill’s antennae towards the target, followed by a propulsion and opening of the feeding basket. Frequency distributions of prey detection distances were significantly different in the light vs. the dark, with median values of 26.5 mm and 19.5 mm, respectively. There were no significant differences in the angles at which prey were detected by krill (relative to the predator’s longitudinal body axis) in the light vs. the dark. Prey detections were symmetrically distributed on either side of the predator, in both light and dark. However, significant asymmetry was found in the dorsal–ventral direction with 80% of the prey detections located below the midline of the krill’s body axis and, given the placement and orientation of the compound eyes, presumably outside its visual field of view. This indicates that, at least under these conditions, vision was not the main sensory modality involved in the detection of active prey by M. norvegica. However, under some circumstances, vision may provide supplemental information. Avoidance responses of copepod prey were nearly twice the velocity of their nominal background swimming speed (153 ± 48 and 85 ± 75 mm s⁻¹, respectively), on average taking them 43 ± 16 mm away from the predator. This is far beyond the krill’s perceptual range, suggesting that the escape reaction provides an effective deterrent to predation (although perhaps less so for free-swimming krill). This information can be used to parameterize models that assess the role of krill as predators in marine ecosystems.     

Investment Evaluation of an Integrated Steel Mill using Multiple Criteria

A conventional steel manufacturing process generates considerable amounts of reject streams and secondary raw material. These streams are either recycled back to the process or treated as waste. Recycling affects negatively on the production yield and on the controllability of unit operations. Waste represents considerable cost unless utilized in another production process as raw material. In these streams, there exists a potential to use the chemical elements more effectively. Therefore, it might be interesting to find an economical technical solution to collect the streams and increase steel production.

Investments on process equipment are typically evaluated using conventional economic figures, like payback time, Net Present Value (NPV) etc. The problem with these practices is, that they consider only numerical aspects. Non-numerical and non-economical criteria are hard to cater to the evaluation. Still, they may affect on the investment profitability in the long run. Such criteria include environmental friendliness or the aspects of process integration.

The article presents a comparison of a conventional steel manufacturing process with one reject stream processing alternative. A target in the process modification is to optimize the use of material and energy within the site. The comparison is based on a balanced set of criteria that affect on the efficiency of an investment. The use of these criteria is a part of the new methodology that has been developed to evaluate investments on integrated process sites. In addition to the criteria, the complete methodology includes: 1) connection of company’s strategic issues into technical design and decision making, 2) optimization of the process and calculation of process potentials (differences in the performance values between the existing process and the modified process) through the use of process integration methodologies and 3) use of decision-making aids. The research is a part of Finnish National Technology Program, “Process-Integration 2000–2004”.     

Properties of a Poly(3-hydroxybutyrate) Depolymerase from Penicillium funiculosum

A poly(3-hydroxybutyrate) (PHB) depolymerase was purified from a fungus, Penicillium funiculosum (IFO6345), with phenyl-Toyopearl and its properties were compared with those of other PHB depolymerases. The molecular mass of the purified enzyme was estimated at about 33 kDa by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. The pH optimum and pI were 6.5 and 6.5, respectively. The purified protein showed affinity to Con A-Sepharose, indicating that it is a glycoprotein. Diisopropylfluorophosphate and dithiothreitol inhibited the depolymerase activity completely. The N-terminal amino acid sequence of the purified enzyme was TALPAFNVNPNSVSVSGLSSGGYMAAQL, which contained a lipase box sequence. This purified enzyme is one of the extracellular PHB depolymerase which belong to serine esterase. The purified enzyme showed relatively strong hydrolytic activity against 3-hydroxybutyrate oligomers compared with its PHB-degrading activity. PHB-binding experiments showed that P. funiculosum depolymerase has the weakest affinity for PHB of all the depolymerases examined.