The effect of size and cheliped autotomy on sexual competition between males of the mud crab <Emphasis Type="Italic">Cyrtograpsus angulatus</Emphasis> Dana

Size advantage in male–male competition over mates, combined with male preference over large females, is a common feature that can drive to size assortative mating and, eventually, sexual selection. In crabs, appendage autotomy can affect assortative mating and opportunity for sexual selection by affecting size advantage in mating contests. In this work, we evaluate the effect of size and appendage autotomy in generating assortative mating in the mud crab Cyrtograpsus angulatus. Field observations of guarding pairs in two different populations show a positive correlation between carapace width of males and females in both the populations. In one of the populations, incidence of appendage autotomy was low and the variability in the size of reproductive males was lower than the variability in the size of randomly collected males (i.e. only larger males were successful in getting a female), whereas there was no differences in the other population (i.e. most male sizes were successful) where the incidence of appendage autotomy was very high, indicating that the importance of size is higher when the incidence of autotomy is low. In this context, experiments (in both populations) show that, in contests for a female, larger males outcompete smaller ones only when they had intact appendages. When males had missing chelipeds, winning or loosing against smaller males was random. This may lead to a decrease in the importance of male size in populations with high incidence of cheliped autotomy, affecting assortative mating and opportunity for selection and, thus, affecting selective pressures.     

Active biomonitoring with wet and dry moss: a case study in an urban area

Active biomonitoring of the air quality in Belgrade, Serbia, was performed using the moss Sphagnum girgensohnii. Moss bags were exposed in parallel with and without irrigation for 3 and 6 months, respectively, at three different sites. Twenty-nine elements were determined in the exposed moss samples by INAA. For all exposure periods, higher uptake in the irrigated moss bags was evident for Al, Cr, Fe, Zn and Sr. Elements such as Cl, K, Rb and Cs were depleted in the moss tissue during the time of exposure. For most of the elements the accumulation after 6 months exceeded that observed after 3 months.     

Verification of the geographical origin of modeled air-mass trajectories by means of the isotope composition of rainwater during the SALLJEX experiment

The SALLJEX experiment was held during the summer 2002–2003. It consisted of three-dimensional observation of the atmosphere to study the structure of the low level jet along the eastern slopes of the Andes. Daily precipitation water samples were collected at two stations (Resistencia and Salta) in northern Argentina and isotope content was analyzed. The isotope data were used in conjunction with air parcel trajectories obtained from a 3-D kinematic model (3D-MTC) developed by the University of Sao Paulo, Brazil. Values of deuterium excess were related with air masses of continental origin, whilst low values were associated with air masses with longer oceanic trajectories. Furthermore, although data are scarce, results show that oxygen-18 and deuterium excess in rainwater are related with the occurrence of the low level jet.     

Spatially explicit modeling of overstory manipulations in young forests: Effects on stand structure and light

Young forests can be manipulated in diverse ways to enhance their ecological values. We used stem maps from two dense, second-growth stands in western Washington and a spatially explicit light model (tRAYci) to simulate effects of five silvicultural manipulations on diameter distribution, species composition, spatial patterning, and light availability. Each treatment removed 30% of the basal area, but differed in how trees were selected for removal. Three primary treatments were thin from below (removing the smallest trees), random thin (removing trees randomly), and gap creation (removing all trees in circles ∼1 tree height in diameter). Two additional treatments combined elements of these approaches: random ecological thin (a mixture of thin from below and random thin) and structured ecological thin (a mixture of thin from below and gap creation).     

Medical geochemistry research in Spišsko-Gemerské rudohorie Mts., Slovakia

This study presents an assessment of the potential impact of geological contamination of the environment on the health of the population in Spišsko-Gemerské rudohorie Mts. (SGR Mts.). The concentration levels of potentially toxic elements (mainly As, Cd, Cu, Hg, Pb, Sb, and Zn) were determined in soils, groundwater, surface water, and stream sediments as well as in the food chain (locally grown vegetables). A medical study included some 30 health indicators for all 98 municipalities of the study area. The As and Sb contents in human fluids and tissues were analyzed in one municipality identified to be at the highest risk. Based on element content, environmental and health risks were calculated for respective municipalities. Out of 98 municipalities 14 were characterized with extremely high environmental risk and 10 were characterized with very high carcinogenic risk from arsenic (groundwater). Extensive statistical analysis of geochemical data (element contents in soils, groundwater, surface water, and stream sediments) and health indicators was performed. Significant correlations between element contents in the geological environment and health indicators, mainly cancer and cardiovascular diseases, were identified. Biological monitoring has confirmed the transfer of elements from the geological environment to human fluids and tissues as well as to the local food chain.     

A model for estimation of potential generation of waste electrical and electronic equipment in Brazil

Sales of electrical and electronic equipment are increasing dramatically in developing countries. Usually, there are no reliable data about quantities of the waste generated. A new law for solid waste management was enacted in Brazil in 2010, and the infrastructure to treat this waste must be planned, considering the volumes of the different types of electrical and electronic equipment generated.This paper reviews the literature regarding estimation of waste electrical and electronic equipment (WEEE), focusing on developing countries, particularly in Latin America. It briefly describes the current WEEE system in Brazil and presents an updated estimate of generation of WEEE. Considering the limited available data in Brazil, a model for WEEE generation estimation is proposed in which different methods are used for mature and non-mature market products.The results showed that the most important variable is the equipment lifetime, which requires a thorough understanding of consumer behavior to estimate. Since Brazil is a rapidly expanding market, the “boom” in waste generation is still to come. In the near future, better data will provide more reliable estimation of waste generation and a clearer interpretation of the lifetime variable throughout the years.     

Use of thermal analysis techniques (TG-DSC) for the characterization of diverse organic municipal waste streams to predict biological stability prior to land application

The use of organic municipal wastes as soil amendments is an increasing practice that can divert significant amounts of waste from landfill, and provides a potential source of nutrients and organic matter to ameliorate degraded soils. Due to the high heterogeneity of organic municipal waste streams, it is difficult to rapidly and cost-effectively establish their suitability as soil amendments using a single method. Thermal analysis has been proposed as an evolving technique to assess the stability and composition of the organic matter present in these wastes. In this study, three different organic municipal waste streams (i.e., a municipal waste compost (MC), a composted sewage sludge (CS) and a thermally dried sewage sludge (TS)) were characterized using conventional and thermal methods. The conventional methods used to test organic matter stability included laboratory incubation with measurement of respired C, and spectroscopic methods to characterize chemical composition. Carbon mineralization was measured during a 90-day incubation, and samples before and after incubation were analyzed by chemical (elemental analysis) and spectroscopic (infrared and nuclear magnetic resonance) methods. Results were compared with those obtained by thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Total amounts of CO₂ respired indicated that the organic matter in the TS was the least stable, while that in the CS was the most stable. This was confirmed by changes detected with the spectroscopic methods in the composition of the organic wastes due to C mineralization. Differences were especially pronounced for TS, which showed a remarkable loss of aliphatic and proteinaceous compounds during the incubation process. TG, and especially DSC analysis, clearly reflected these differences between the three organic wastes before and after the incubation. Furthermore, the calculated energy density, which represents the energy available per unit of organic matter, showed a strong correlation with cumulative respiration. Results obtained support the hypothesis of a potential link between the thermal and biological stability of the studied organic materials, and consequently the ability of thermal analysis to characterize the maturity of municipal organic wastes and composts.     

Methodology for quantification of waste generated in Spanish railway construction works

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project.     

Estimation of end of life mobile phones generation: the case study of the Czech Republic

The volume of waste electrical and electronic equipment (WEEE) has been rapidly growing in recent years. In the European Union (EU), legislation promoting the collection and recycling of WEEE has been in force since the year 2003. Yet, both current and recently suggested collection targets for WEEE are completely ineffective when it comes to collection and recycling of small WEEE (s-WEEE), with mobile phones as a typical example. Mobile phones are the most sold EEE and at the same time one of appliances with the lowest collection rate. To improve this situation, it is necessary to assess the amount of generated end of life (EoL) mobile phones as precisely as possible. This paper presents a method of assessment of EoL mobile phones generation based on delay model. Within the scope of this paper, the method has been applied on the Czech Republic data. However, this method can be applied also to other EoL appliances in or outside the Czech Republic. Our results show that the average total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. We impute long lifespan particularly to a storage time of EoL mobile phones at households, estimated to be 4.35 years. In the years 1990-2000, only 45 thousands of EoL mobile phones were generated in the Czech Republic, while in the years 2000-2010 the number grew to 6.5 million pieces and it is estimated that in the years 2010-2020 about 26.3 million pieces will be generated. Current European legislation sets targets on collection and recycling of WEEE in general, but no specific collection target for EoL mobile phone exists. In the year 2010 only about 3-6% of Czech EoL mobile phones were collected for recovery and recycling. If we make similar estimation using an estimated average EU value, then within the next 10 years about 1.3 billion of EoL mobile phones would be available for recycling in the EU. This amount contains about 31 tonnes of gold and 325 tonnes of silver. Since Europe is dependent on import of many raw materials, efficient recycling of EoL products could help reduce this dependence. To set a working system of collection, it will be necessary to set new and realistic collection targets.