Recycled blocks with improved sound and fire insulation containing construction and demolition waste

The environmental problem posed by construction and demolition waste (C&D waste) is derived not only from the high volume produced, but also from its treatment and disposal. Treatment plants receive C&D waste which is then transformed into a recycled mixed aggregate. The byproduct is mainly used for low-value-added applications such as land escape restoration, despite the high quality of the aggregate. In the present work, the chemical composition properties and grading curve properties of these aggregates are defined. Furthermore, the resulting recycled concrete with a high proportion of recycled composition, from 20% to 100% replacement of fine and coarse aggregate, is characterized physically and mechanically. An environmental study of the new construction material when all aggregates are substituted by C&D waste shows a low toxicity level, similar to that of other construction materials. The new material also has improved properties with respect to standard concrete such as high fire resistance, good heat insulation, and acoustic insulation.     

Adoption of post-disaster waste management plan into disaster management guidelines for Malaysia

Journal of Material Cycles and Waste Management - Malaysia is one of the Asian countries which are prone to disaster: flooding is one of the natural disasters that are becoming more common in...     

Carbon dioxide capture and recovery by means of TSA and/or VSA

Experimental work is performed with a 5A zeolite on a small laboratory column with heating from the wall. Carbon dioxide adsorption occurs at atmospheric pressure and different CO₂ concentrations in nitrogen. Comparisons of different methods of desorption by heating, purge and/or vacuum are studied. Desorption by heating only leads to almost pure CO₂ (around 99% purity) and a recovery nearly linear to the heating temperature, ranging from 45% at 130 °C to 79% at 210 °C. Recovery can be subsequently increased with a nitrogen purge to more than 98% but the recovered carbon dioxide is diluted due to the dispersive character of the desorption wave and the operation time is long. Increasing the flow rate decreases the desorption time but has no effect on the purity because the total purge volume remains about the same. Substitution of the purge step with a vacuum step leads to pure CO₂ and almost total recovery. Desorption under vacuum only without heating leads to pure CO₂ (around 99% purity) but limited recovery (85% in the present work).Desorption under vacuum seems to be more simple for large-scale applications. When using a water liquid ring pump, the temperature of the ring must be kept as low as possible to provide a high operating capacity.     

A Bayesian network analysis of workplace accidents caused by falls from a height

This article analyses, using Bayesian networks, the circumstances surrounding workplace tasks performed using auxiliary equipment (ladders, scaffolding, etc.) that may result in falls. The information source was a survey of employees working at a height. We were able to determine the usefulness of this approach – innovative in the accident research field – in identifying the causes that have the greatest bearing on accidents involving auxiliary equipment: in these cases, the adoption of incorrect postures during work and a worker’s inadequate knowledge of safety regulations. Likewise, the duration of tasks was also associated with both these variables, and therefore, with the accident rate. Bayesian networks also enable dependency relationships to be established between the different causes of accidents. This information – which is not usually furnished by conventional statistical methods applied in the field of labour risk prevention – allow a causality model to be defined for workplace accidents in a more realistic way. With this statistic tool, the expert is also provided with useful information that can be input to a management model for labour risk prevention.