Thermal destruction of benzene

The thermal destruction of benzene in methane/air flue gas is studied experimentally using an atmospheric laminar flow reactor in laboratory scale. The reactor is operated at four different fuel equivalent ratios (phi = 0.06, 0.1,0.5, 3.7), and temperatures in the range from 850 to 973 K and realises a residence time of 5 s. Stable-species concentrations are measured by gas chromatography (GC) and high-pressure liquid chromatography (HPLC), where phenol, acetylene, formaldehyde, acrolein, methane and acetaldehyde are the major hydrocarbon products besides CO and CO2. The augmentation of the temperature from 850 to 973 K increases the benzene conversion rate from 55% to 99%. The experimental results for one fuel equivalent ratio (phi = 0.5) are compared to the benzene model proposed by Emdee et al. (J. Phys. Chem. 92 (1992) 2151-2161). A fair agreement is observed for the benzene consumption and the CO production throughout the temperature range considered here. The small hydrocarbons are not very well matched, which requires further research on the sub-models. Our experimental results on laboratory scale provide a database for the modelling of benzene oxidation in waste incinerators.     

Inactivation of hepatitis A virus and murine norovirus on surfaces of plastic,steel and raspberries using steam-ultrasound treatment

Food and Environmental Virology - The leading causes of foodborne viral disease outbreaks are human norovirus and hepatitis A virus (HAV). Their environmental persistence enables contamination of...     

The functional response of a hoarding seed predator to mast seeding

Mast seeding involves the episodic and synchronous production of large seed crops by perennial plants. The predator satiation hypothesis proposes that mast seeding maximizes seed escape because seed predators consume a decreasing proportion of available seeds with increasing seed production. However, the seed escape benefits of masting depend not only on whether predators are satiated at high levels of seed production, but also on the shape of their functional response (type II vs. type III), and the actual proportion of available seeds that they consume at different levels of seed production. North American red squirrels (Tamiasciurus hudsonicus) are the primary vertebrate predator of white spruce (Picea glauca) mast seed crops in many boreal regions because they hoard unopened cones in underground locations, preempting the normal sequence of cone opening, seed dispersal, and seed germination. We document the functional response of cone-hoarding by red squirrels across three non-mast years and one mast year by estimating the number of cones present in the territories of individual red squirrels and the proportion of these cones that they hoarded each autumn. Even though red squirrels are not constrained by the ingestive and on-body (fat reserves) energy reserve limitations experienced by animals that consume seeds directly, most squirrels hoarded < 10% of the cones present on their territories under mast conditions. Cone availability during non-mast years also reached levels that satiated the hoarding activity of red squirrels; however, this occurred only on the highest-quality territories. Squirrels switched to mushroom-hoarding when cone production was low and mushrooms were abundant. This resulted in type III functional response whereby the proportional harvest of cones was highest at levels of cone availability that were intermediate within non-mast years. Overall, more cones escaped squirrel cone-hoarding during a mast event than when cone production was low in non-mast years, which supports the predator satiation hypothesis. However, the highly variable seed escape in non-mast years may help to explain why all spruce cone production is not concentrated into fewer, larger, mast years.     

Indoor Emissions from Conversion Varnishes

ABSTRACT

Conversion varnishes are two-component, acid-catalyzed varnishes that are commonly used to finish cabinets. They are valued for their water and stain resistance, as well as their appearance. They have been found, however, to contribute to indoor emissions of organic compounds. For this project, three commercially available conversion varnish systems were selected. A U.S. Environmental Protection Agency (EPA) Method 24 analysis was performed to determine total volatile content, and a sodium sulfite titration method was used to determine uncombined (free) formaldehyde content of the varnish components. The resin component was also analyzed by gas chromatography/mass spectroscopy (GC/MS) (EPA Method 311 with an MS detector) to identify individual organic compounds. Dynamic small chamber tests were then performed to identify and quantify emissions following application to coupons of typical kitchen cabinet wood substrates, during both curing and aging. Because conversion varnishes cure by chemical reaction, the compounds emitted during curing and aging are not necessarily the same as those in the formulation. Results of small chamber tests showed that the amount of formaldehyde emitted from these coatings was 2.3–8.1 times the amount of free formaldehyde applied in the coatings. A long-term test showed a formaldehyde emission rate of 0.17 mg/m²/hr after 115 days.     

Heavy metal contamination in the vicinity of an industrial area near Bucharest

Background, aim, and scope

Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children’s health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town—Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized.

Materials and methods

Water, soil, and atmospheric deposition samples were collected from different locations within 3 km from the industrial area. For comparison, samples were also taken from Bucharest. Water samples were filtered (<0.45 μm), extracted by salpetric acid, and quantified by ICP-OES and ICP-MS. Soil samples were dried, sieved (<2 mm), extracted by aqua regia and analyzed by AAS. In order to quantify the atmospheric deposition, three kinds of permanently open collecting pots were used on nine different sites between August and November 2006.

Results

At most sampling locations, the heavy metal concentrations in soil decrease with increasing distance to the presumably major source of pollution. Highest heavy metal concentrations were found in 10–20 cm soil depths. There were also decreasing heavy metal concentrations for atmospheric deposition with increasing distance to the industrial site. In surface and groundwater samples, traces of zinc, copper and lead were detected.

Discussion

The heavy metal concentrations in soil were increased in the study area, mostly under legal action limits in low-concern areas (e.g., 1,000 mg Pb/kg dry soil), but often above action limits for high-concern areas (100 mg Pb/kg dry soil) such as populated areas. The soluble lead concentrations in water samples indicate a need for monitoring and assessing water quality in more detail. The results for atmospheric deposition showed increased dust precipitation and heavy metal loads in the study area compared to Bucharest. However, based on mass flow balance calculations, the actual atmospheric deposition of heavy metals must be much lower than it was in the past decades.

Conclusions

It was shown that highest lead values in water, soil and atmospheric deposition are rather to be found near the investigated industrial site than at the control sites in Bucharest. Our results correspond very well with results that show that children from Pantelimon have significantly increased lead concentrations in their blood compared to children in Bucharest. The increased lead contamination around the investigated industrial area is likely to have caused the increased exposure for children living in Pantelimon.

Recommendations and perspectives

In high-concern areas, such as found in populated areas, further measures have to be taken to avoid health risks for people living in these areas. The measures already taken to reduce emissions from the industrial site will help to avoid further increases in heavy metal concentrations. In areas with exceeded action limits, measures have to be taken as required by law. Detailed risk assessments could help to take necessary actions to protect public health in this area. The public should be informed about the potential hazards of eating plants grown in that area. Educational programs for schools, informing children about the contamination, should lead to a better understanding of environmental problems and a more sustainable behavior in the future.

     

Correction to: Documenting lemming population change in the Arctic: Can we detect trends?

Ambio - In the original published article, some of the symbols in figure 1A were modified incorrectly during the typesetting and publication process. The correct version of the figure is provided...