The Valley of Mexico: summary of observational studies on its air quality and effects on vegetation

Present day Mexico City was established on the banks of the now dead Lake Texcoco by Aztec Indians in a.d. 1325. Over time, increasing population growth, urbanization, vehicular traffic and the number of diverse stationary sources, coupled with its topography and the resultant frequency of prevalent stagnant air masses make Mexico City one of the most polluted areas in the world. Use of biological indicator plants since the early 1970s has shown the critical nature of phytotoxic photochemical oxidants in the region. More recent empirical studies with bean, soybean and pine species confirm these observations and raise concern regarding the geographic magnitude of the problem. Surface measurements of air quality in the region are inadequate and require much additional support. Ultimately, ambient air quality measurements must be coupled with the observations on responses of sensitive vegetation. While the results presented in this paper are primarily observational or qualitative, they hopefully serve the purpose of bringing attention to a critical air quality issue in a developing country.     

Effects of atmospheric ammonia (NH3) on terrestrial vegetation: a review

At the global scale, among all N (nitrogen) species in the atmosphere and their deposition on to terrestrial vegetation and other receptors, NH3 (ammonia) is considered to be the foremost. The major sources for atmospheric NH3 are agricultural activities and animal feedlot operations, followed by biomass burning (including forest fires) and to a lesser extent fossil fuel combustion. Close to its sources, acute exposures to NH3 can result in visible foliar injury on vegetation. NH3 is deposited rapidly within the first 4-5 km from its source. However, NH3 is also converted in the atmosphere to fine particle NH4+ (ammonium) aerosols that are a regional scale problem. Much of our current knowledge of the effects of NH3 on higher plants is predominantly derived from studies conducted in Europe. Adverse effects on vegetation occur when the rate of foliar uptake of NH3 is greater than the rate and capacity for in vivo detoxification by the plants. Most to least sensitive plant species to NH3 are native vegetation > forests > agricultural crops. There are also a number of studies on N deposition and lichens, mosses and green algae. Direct cause and effect relationships in most of those cases (exceptions being those locations very close to point sources) are confounded by other environmental factors, particularly changes in the ambient SO2 (sulfur dioxide) concentrations. In addition to direct foliar injury, adverse effects of NH3 on higher plants include alterations in: growth and productivity, tissue content of nutrients and toxic elements, drought and frost tolerance, responses to insect pests and disease causing microorganisms (pathogens), development of beneficial root symbiotic or mycorrhizal associations and inter species competition or biodiversity. In all these cases, the joint effects of NH3 with other air pollutants such as all-pervasive O3 or increasing CO2 concentrations are poorly understood. While NH3 uptake in higher plants occurs through the shoots, NH4+ uptake occurs through the shoots, roots and through both pathways. However, NH4+ is immobile in the soil and is converted to NO3- (nitrate). In agricultural systems, additions of NO3- to the soil (initially as NH3 or NH4+) and the consequent increases in the emissions of N2O (nitrous oxide, a greenhouse gas) and leaching of NO3- into the ground and surface waters are of major environmental concern. At the ecosystem level NH3 deposition cannot be viewed alone, but in the context of total N deposition. There are a number of forest ecosystems in North America that have been subjected to N saturation and the consequent negative effects. There are also heathlands and other plant communities in Europe that have been subjected to N-induced alterations. Regulatory mitigative approaches to these problems include the use of N saturation data or the concept of critical loads. Current information suggests that a critical load of 5-10 kg ha(-1) year(-1) of total N deposition (both dry and wet deposition combined of all atmospheric N species) would protect the most vulnerable terrestrial ecosystems (heaths, bogs, cryptogams) and values of 10-20 kg ha(-1) year(-1) would protect forests, depending on soil conditions. However, to derive the best analysis, the critical load concept should be coupled to the results and consequences of N saturation.     

Surface ozone exposures measured at clean locations around the world

For assessing the effects of air pollution on vegetation, some researchers have used control chambers as the basis of comparison between crops and trees grown in contemporary polluted rural locations and those grown in a clean environment. There has been some concern whether the arbitrary ozone level of 0.025 ppm and below, often used in charcoal-filtration chambers to simulate the natural background concentration of ozone, is appropriate. Because of the many complex and man-made factors that influence ozone levels, it is difficult to determine natural background. To identify a range of ozone exposures that occur at 'clean' sites, we have calculated ozone exposures observed at a number of 'clean' monitoring sites located in the United States and Canada. We do not claim that these sites are totally free from human influence, but rather than the ozone concentrations observed at these 'clean' sites may be appropriate for use by vegetation researchers in control chambers as pragmatic and defensible surrogates for natural background. For comparison, we have also calculated ozone exposures observed at four 'clean' remote sites in the Northern and Southern Hemispheres and at two remote sites (Whiteface Mountain, NY and Hohenpeissenberg, FRG) that are considered to be more polluted. Exposure indices relevant for describing the relationship between ozone and vegetation effects were applied. For studying the effects of ozone on vegetation, the higher concentrations are of interest. The sigmoidally-weighted index appeared to best separate those sites that experienced frequent high concentration exposures from those that experienced few high concentrations. Although there was a consistent seasonal pattern for the National Oceanic and Atmospheric Administration (NOAA) Geophysical Monitoring for Climate Change (GMCC) sites indicating a winter/spring maximum, this was not the case for the other remote sites. Some sites in the continental United States and southern Canada experienced ozone exposures in the range between those values experienced at the South Pole and Mauna Loa NOAA GMCC sites. The 7-month average of the daily 7 h average ozone concentration at 'clean' sites located in the continental United States and southern Canada ranged from 0.028 to 0.050 ppm. Our analysis indicates that seasonal 7 h average values of 0.025 ppm and below, used by some vegetation researchers as a reference point, may be too low and that estimates of crop losses and tree damage in many locations may have been too high. Our analysis indicates that a more appropriate reference point in North America might be between 0.030 and 0.045 ppm. We have observed that the subtle effects of changing distribution patterns of hourly average ozone concentrations may be obscured with the use of exposure indices such as the monthly average. Future assessments of the effects associated with ground-level ozone should involve the use of exposure indices sensitive to changes in the distribution patterns of hourly average ozone concentrations.     

PLATIN (plant-atmosphere interaction) II: Co-occurrence of high ambient ozone concentrations and factors limiting plant absorbed dose

There is an ongoing debate as to which components of the ambient ozone (O3) exposure dynamics best explain adverse crop yield responses. A key issue is regarding the importance of peak versus mid-range hourly ambient O3 concentrations. While in this paper the importance of peak atmospheric O3 concentrations is not discounted, if they occur at a time when plants are conducive for uptake, the corresponding importance of more frequently occurring mid-range O3 concentrations is described. The probability of co-occurrence of high O3 concentrations and O3 uptake limiting factors is provided using coherent data sets of O3 concentration, air temperature, air humidity, mean horizontal wind velocity and global radiation measured at representative US and German air quality monitoring sites. Using the PLant-ATmosphere INteraction (PLATIN) model, the significance of the aforementioned meteorological parameters on ozone uptake is examined. In addition, the limitations of describing the O3 exposure for plants under ambient, chamberless conditions by SUM06, AOT40 or W126 exposure indices are discussed.     

Ambient ozone and crop loss: establishing a cause-effect relationship

This paper provides the results of a retrospective mathematical analysis of the US NCLAN (National Crop Loss Assessment Network) open-top chamber data. Some 77% of the 73 crop harvests examined, showed no statistically significant yield differences between NF (non-filtered open-top chamber) and AA (chamberless, ambient air) treatments (no easily discernable chamber effects on yield). However, among these cases only seven acceptable examples showed statistically significant yield reductions in NF compared to the CF (charcoal filtered open-top chamber) treatment. An examination of the combined or cumulative hourly ambient O3 frequency distribution for cases with yield loss in NF compared to a similar match of cases without yield loss showed that the mean, median and the various percentiles were all higher (>/= 3 X) in the former in contrast to the latter scenario. The combined frequency distribution of hourly O3 concentrations for the cases with yield loss in NF were clearly separated from the corresponding distribution with no yield loss, at O3 concentrations > 49 ppb. Univariate linear regressions between various O3 exposure parameters and per cent yield losses in NF showed that the cumulative frequency of occurrence of O3 concentrations between 50 and 87 ppb was the best predictor (adjusted R2 = 0.712 and p = 0.011). This analysis also showed that the frequency distribution of hourly concentrations up to 87 ppb O3 represented a critical point, since the addition of the frequency distributions of > 87 ppb O3 did not improve the R2 values. In fact as the frequency of hourly O3 concentrations included in the regression approached 50-100 ppb, the R2 value decreased substantially and the p value increased inversely. Further, univariate linear regressions between the frequencies of occurrence of various O3 concentrations between 50 and 90 ppb and: (a) cases with no yield difference in NF and (b) cases with yield increase in NF compared to the CF treatment (positive effect) provided no meaningful statistical relationship (adjusted R2 = 0.000) in either category. These results support the basis that additional evaluation of the frequency of occurrence of hourly O3] concentrations between 50 and 87 ppb for cases with the yield reductions could provide a meaningful ambient O3 standard, objective or guideline for vegetation.     

Forest-based biomass supply potential and economics for the pellet production in Nepal

In the current study, the potential of forest-based biomass supply for the pellet production in Nepal is investigated. This study showed that about 2.76 million tonnes (Mt) biomass in the form of pellets are potentially available from forest-based biomass. Considering a processing capacity of 6 tonnes (t)/hr of a pellet plant, the production cost of the pellets was calculated to be $43.53/t. Pellets are generally used as fuel to produce thermal energy in industries, which helps to save the economy and the environment of the country.     

Direct Effects of Atmospheric Sulfate Deposition on Vegetation

Acid sulfate aerosol (500 μg/m³) had no effect on soybean or pinto bean after a single 4-h exposure. However, visible Injury and chlorophyll loss occurred when plants were sequentially exposed to acid aerosol and ozone (380 μg/m³) for 4 h. In yellow poplar seedlings exposed to ozone (200 μg/m³), sulfur dioxide (210 μg/m³) and simulated rain solutions (pH 5.6, 4.3 and 3.0) for 6 weeks, root dry weight, leaf area increase, mean relative growth rate and unit leaf rate decreased linearly with pH in ozone-treated plants. However, unit leaf rate and mean relative growth rate increased linearly in response to sulfur dioxide as solution acidity increased. Ambient wet and dry sulfate concentrations appear insufficient to directly impact vegetation.     

A Technical Amplification of NAPAP’s Findings

In September 1987, NAPAP released a 4-volume, 925 page interim report that summarized the effects of acidic precipitation on crops, forests, aquatic ecosystems, visibility, and human health. Following the release of the report, APCA coordinated an international conference to provide a forum for the technical amplification of the conclusions reached in NAPAP's report. Scientists from the United States and Canada were invited to participate in the conference. The focus of the meeting was concerned only with the technical aspects of the NAPAP report. At the conference, there were important research concepts presented that may require further attention before definitive, bottom line statements can be made concerning the effects of acid precipitation on the environment. The purpose of this paper is to summarize the key technical points made at the conference and provide NAPAP with additional scientific inputs as it begins to prepare for its 1990 Final Assessment Report.     

Important Considerations for Establishing a Secondary Ozone Standard to Protect Vegetation

Air quality standards are established to prevent or minimize the risk of adverse effects from air pollution to human health, vegetation, and materials. In order to develop standards which provide an adequate measure of protection to vegetation, it is necessary to define, in as precise terms as possible, the relationship between ambient air quality and the potential for adverse effects on vegetation. Based on recent evidence published in the literature, as well as retrospective studies using data from the National Crop Loss Assessment Network (NCLAN), cumulative indices can be used to describe exposures of ozone for predicting agricultural crop effects. However, the mathematical form of the standard that may be proposed to protect crops does not necessarily have to be of the same form as that used in the statistical or process oriented mathematical models that relate ambient ozone exposures with vegetation effects. This paper discusses the limitations associated with applying a simple statistic that may take the place of a more biologically meaningful exposure parameter. While the NCLAN data have been helpful in identifying indices that may be appropriate for establishing exposure-response relationships, the limitations associated with the NCLAN protocol need to be considered when attempting to apply these relationships in the establishment of a secondary national ambient air quality standard. The Weibull model derived from NCLAN experiments must demonstrate its generality and universal applicability. Furthermore, its predictive power must be tested using independent sets of field data.     

The redox state and activity of superoxide dismutase classes in Arabidopsis thaliana under cadmium or copper stress

The redox state of glutathione and ascorbate as well as the activity of superoxide dismutase classes were determined in leaves of Arabidopsis thaliana grown for seven days in the nutrient solution containing 0, 5 and 50 microM Cd or Cu excess. A decrease in GSH/GSSG ratio was found in plants under Cd and Cu stress. In the plants exposed to Cu stress the activity of all SOD classes increased. However, in the plants treated with Cd the activity of FeSOD and MnSOD was elevated, but CuZnSOD activity was diminished in comparison with control. In these plants the activity of SOD classes was dependent on both the GSH/GSSG and AA/DHA ratios, while in those exposed to Cu excess - on the GSH/GSSG ratio. Differences were shown in the changes both in redox state and activity of SOD classes caused by the metals differing in physiochemical properties. Moreover, relationships between changes in SOD class activities and ROS levels were discussed.