Characterization of PM10 and PM2.5 and associated heavy metals at the crossroads and urban background site in Zabrze, Upper Silesia, Poland, during the smog episodes

The concentrations of seven heavy metals (Cd, Cr, Cu, Fe, Mn, Ni, and Pb) associated with PM10 and PM2.5 at the crossroads and the background sites have been studied in Zabrze, Poland, during smog episodes. Although the background level was unusually elevated due to both high particulate emission from the industrial and municipal sources and smog favorable meteorological conditions, significant increase of the concentration of PM2.5 and PM10 as well as associated heavy metals in the roadside air compared to the urban background has been documented. The average daily difference between the roadside and corresponding urban background aerosol concentration was equal to 39.5 μg m^???3 for PM10 and 41.2 μg m^???3 for PM2.5. The highest levels of the studied metals in Zabrze appeared for iron carried by PM10 particles: 1,706 (background) and 28,557 ng m^???3 (crossroads). The lowest concentration level (in PM10) has been found for cadmium: 7 and 77 ng m^???3 in the background and crossroads site, respectively. Also the concentrations of heavy metals carried by the fine particles (PM2.5) were very high in Zabrze during the smog episodes. Concentrations of all studied metals associated with PM10 increased at the roadside compared to the background about ten times (one order) while metals contained in PM2.5 showed two to three times elevated concentrations (except Fe—five times and Cr—no increase).     

Antimicrobial resistance of heterotrophic marine bacteria isolated from seawater and sands of recreational beaches with different organic pollution levels in southeastern Brazil: evidences of resistance dissemination

Antimicrobial resistance of marine heterotrophic bacteria to different antimicrobials agents were evaluated in seawater, dry and wet sands from three marine recreational beaches with different pollution levels. In all studied beaches, the greatest frequencies of resistance were found in relation to penicillin. On Gonzaguinha, the most polluted beach, 72.3% of all isolated strains showed simple resistance, whilst 8.33% had multiple resistance. The values found on Ilha Porchat beach, were 70.8% and 6.9% for simple and multiple resistances, respectively. On Guaraú, the less polluted beach, only 35.3% of isolated strains had simple resistance. Multiple resistance was not observed. While samples from Gonzaguinha and Ilha Porchat beach showed isolated strains resistant to seven and six different antimicrobial agents, respectively, samples from Guaraú beach were resistant only to penicillin and erytromicin. The positive correlations obtained between the degree of seawater contamination and frequency and variability of bacterial resistance indicate that polluted marine recreational waters and sands are sources of resistant bacteria contributing thus, to the dissemination of bacterial resistance.     

Association between biotic and abiotic parameters and the occurrence of cyanobacteria in a Brazilian reservoir

The water reservoir of Vargem das Flores, Brazil, has been subject to eutrophication problems. The occurrence of cyanobacterial blooms in this water body has raised concerns regarding the presence of toxic metabolites. In order to understand the factors that promote the proliferation and distribution of cyanobacteria in the reservoir, physicochemical parameters, species composition, and toxicity of the reservoir water column were analyzed at monthly intervals over a 3-year period (2004-2007) using a range of analytical techniques. The results showed that cyanobacteria were absent in the dry period, returning after the onset of stratification. A succession pattern was observed within this group. The Aphanocapsa genus was dominant in the last rainy period of the study (October 2006 to March 2007). However toxicity was only detected when the genera Microcystis and Sphaerocavum were present (October 2005). The principal components analysis showed negative correlation between cyanobacteria and orthophosphate. The change of dominant cyanobacteria along the 3 years of study and the final prevalence of nontoxic genera in the reservoir is an evidence of water quality improvement in response to the management techniques implemented in the reservoir basin.     

Assessment of trace metals and porphyrins in excreta of Humboldt penguins (Spheniscus humboldti) in different locations of the northern coast of Chile

To add data on trace metal contamination of Humboldt penguins in the South Pacific, levels of trace metals (As, Hg, Pb, Cu, Zn, and Cd) and porphyrins (copro-, uro-, and proto-) in excreta of Humboldt penguins that inhabit some important nesting sites on the northern coast of Chile were determined. Fresh excreta were collected on Pan de Azúcar Island, Chañaral Island, and Cachagua Island, from December 2011 to January 2012. Concentration of metals was determined by flame atomic absorption spectrophotometry, whereas porphyrins levels were measured by fluorimetric analysis. Concentrations (dry weight) of Cu (199.67 μg g^?1), As (7.85 μg g^?1), and Pb (12.78 μg g^?1) were higher (p?≤?0.05) in Cachagua Island. Colonies from Pan de Azúcar Island showed the highest levels of Hg (0.76 μg g^?1), Cd (47.70 μg g^?1), and Zn (487.10 μg g^?1). Samples from Cachagua Island showed the highest (p?≤?0.05) levels of copro- (2.16 nmol g^?1), uro- (2.20 nmol g^?1), and protoporphyrins (2.23 nmol g^?1). There was a positive correlation between the metals As, Pb, and Cu with uro-, copro-, and protoporphyrins. The results indicated that penguin colonies from Cachagua Island are more exposed to metal contamination than penguin colonies from Pan de Azúcar and Chañaral Islands, thus being more likely to develop certain diseases caused by contamination with metals. Considering biomagnification, the metals detected in the excreta of Humboldt penguins can be a source of contamination from marine environments to terrestrial ecosystems, which could also affect other living organisms.     

Chlorophyll and suspended sediment mapping to the Caribbean Sea from rivers in the capital city of the Dominican Republic using ALOS AVNIR-2 data

This study aims to study the distribution of contaminants in rivers that flow into the Caribbean Sea using chlorophyll-a (Chl-a) and suspended sediment (SS) as markers and ALOS AVNIR-2 satellite sensor data. The Haina River (HN) and Ozama and Isabela Rivers (OZ-IS) that flow through the city of Santo Domingo, the capital of the Dominican Republic, were chosen. First, in situ spectral reflectance/Chl-a and SS datasets obtained from these rivers were acquired in March 2011 (case A: with no rain influence) and June 2011 (case B: with rain influence), and the estimation algorithm of Chl-a and SS using AVNIR-2 data was developed from the datasets. Moreover, the developed algorithm was applied to AVNIR-2 data in November 2010 for case A and August 2010 for case B. Results revealed that for Chl-a and SS estimations under cases A and B conditions, the reflectance ratio of AVNIR-2 band 4 and band 3 (AV4/AV3) and the reflectance of AVNIR-2 band 4 (AV4) were effective. The Chl-a and SS mapping results obtained using AVNIR-2 data corresponded with the field survey results. Finally, an outline of the distribution of contaminants at the mouth of the river that flows into the Caribbean Sea was obtained for both rivers in cases A and B.     

The impact of land use and season on the riverine transport of mercury into the marine coastal zone

In Mediterranean seas and coastal zones, rivers can be the main source of mercury (Hg). Catchment management therefore affects the load of Hg reaching the sea with surface runoff. The major freshwater inflows to the Baltic Sea consist of large rivers. However, their systems are complex and identification of factors affecting the outflow of Hg from its catchments is difficult. For this reason, a study into the impact of watershed land use and season on mercury biogeochemistry and transport in rivers was performed along two small rivers which may be considered typical of the southern Baltic region. Neither of these rivers are currently impacted by industrial effluents, thus allowing assessment of the influence of catchment terrain and season on Hg geochemistry. The study was performed between June 2008 and May 2009 at 13 sampling points situated at different terrain types within the catchments (forest, wetland, agriculture and urban). Hg analyses were conducted by CVAFS. Arable land erosion was found to be an important source of Hg to the aquatic system, similar to urban areas. Furthermore, inflows of untreated storm water discharge resulted in a fivefold increase of Hg concentration in the rivers. The highest Hg concentration in the urban runoff was observed with the greatest amount of precipitation during summer. Moderate rainfalls enhance the inflow of bioavailable dissolved mercury into water bodies. Despite the lack of industrial effluents entering the rivers directly, the sub-catchments with anthropogenic land use were important sources of Hg in the rivers. This was caused by elution of metal, deposited in soils over the past decades, into the rivers. The obtained results are especially important in the light of recent environmental conscience regulations, enforcing the decrease of pollution by Baltic countries.     

Dissolved inorganic nutrients and chlorophyll a in an estuary receiving sewage treatment plant effluents: Cachoeira River estuary (NE Brazil)

Sampling was conducted monthly during a transition period between the dry and rainy seasons in order to evaluate the effectiveness of a municipal sewage treatment plant (STP) in eutrophication control. STP effluent and fluvial input data were also estimated. In the dry period, high concentrations of nutrients, chlorophyll a (up to 360 μg?L^?1), and anoxia in bottom waters were observed in the upper portion of the estuary. Nitrate was scarce during the dry months, although high concentrations were observed at the river sources and the upper estuary. The N:P and Si:P molar ratios were usually below 16:1, and the Si:N ratio was higher than 1:1. The fluvial inputs were a greater source of nutrients to the estuary than the STP, but nutrient loading by these effluents were also important in contributing to the eutrophication of the upper estuarine zone, especially in the dry season when symptoms were more intense.     

Aerosol residence times and changes in radioiodine-131I and radiocaesium-137 Cs activity over Central Poland after the Fukushima-Daiichi Nuclear reactor accident

The first detectable activities of radioiodine (131)I, and radiocaesium (134)Cs and (137)Cs in the air over Central Poland were measured in dust samples collected by the ASS-500 station in the period of 21(st) to 24(th) of March, 2011. However, the highest activity of both fission products, (131)I and (137)Cs: 8.3 mBq m(-3) and 0.75 mBq m(-3), respectively, were obtained in the samples collected on 30(th) March, i.e.～18 days after the beginning of the fission products' discharge from the damaged units of the Fukushima Daiichi Nuclear Power Plant. The simultaneously determined corrected aerosol residence time for the same samples by (210)Pb/(210)Bi and (210)Pb/(210)Po methods was equal to 10 days. Additionally, on the basis of the activity ratio of two other natural cosmogenic radionuclides, (7)Be and (22)Na in these aerosol samples, it was possible to estimate the aerosol residence time at ～150 days for the solid particles coming from the stratospheric fallout. These data, as well as the differences in the activity size distribution of (7)Be and (131)I in the air particulate matter, show, in contrast to the Chernobyl discharge, a negligible input of stratospheric transport of Fukushima-released fission products.     

The Adsorption of Formaldehyde on Suspended Particles investigated on model systems

Our laboratory investigation aimed at assessing to what extent suspended particles could adsorb formaldehyde, allowing it, when inhaled, to penetrate deeper into the lung. We used two types of pure soot, N-220 and N-660 (the former being a highly active oil furnace soot with smaller particles and a larger surface area than the latter), because of their chemical inactivity and the adsorptive properties. The results obtained in experimental conditions showed that soot particles could bind 2.3 to 50.2% of formaldehyde, depending on the particle size, relative humidity, amount of particles and the duration of the contact. The recovery of formaldehyde from the particles was also tested. Further investigation is planned under realistic conditions.